Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP120T-485I

Microchip Tech · Monitors & Reset Circuits · SOT-23

MCP120T-485I from Microchip Tech, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 RST output Active-low open-drain RESET output (MCP120, no pull-up; the MCP130 adds an internal 5 kΩ pull-up) asserted whenever VDD is below the trip point and held for 350 ms typical (150 to 700 ms) after VDD rises above it.
2 VDD power_in Supply voltage and monitored input, operating range 1.0 V to 5.5 V with 7.0 V absolute maximum, with a 0.1 µF bypass capacitor recommended close to the pin.
3 VSS power_in Ground reference for the device; all inputs and outputs are rated -0.6 V to VDD + 1.0 V with respect to VSS.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23
Category Power Management ICs
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range VDD 1 5.5 V 2
VDD Value to RESET VDDMIN 1 V 2
Operating Current IDD 45 60 µA VDD = 5.5V (no load) 2
VDD Trip Point (MCP1X0-485) VTRIP 4.6 4.725 4.85 V MCP1X0-485 2
RESET Low Level Output Voltage (MCP1X0-450/460/475/485) VOL 0.6 V IOL = 8.5 mA, VDD = VTRIPMIN 2
VDD Detect to RESET Inactive tRPU 150 350 700 ms 2
All inputs and outputs w.r.t. VSS -0.6 V w.r.t. VSS 2
Storage temperature -65 150 °C 2
Ambient temp. with power applied -65 125 °C 2
ESD protection on all pins 2 kV on all pins 2
Operating ambient temperature (Industrial) -40 85 °C Industrial (I) 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN), Narrow, 150 mil (SOIC Foot Angle φ 048048 9

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: MCP120T-485I
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.01 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: mcp120t-485i-tt-etched.step / mcp120t-485i-tt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp120t-485i-tt.step / mcp120t-485i-tt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (16 pp, sha256 4a71b5087051894f, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF