main
Ray
Publish 0.1.0
1e3e30b
MCP111-195I
Microchip Tech · Monitors & Reset Circuits · TO-92-3
MCP111-195I from Microchip Tech, in a TO-92-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Active-low reset output that is low when VDD is below VTRIP and goes high only when VDD rises above VTRIP + VHYS; it is open-drain on the MCP111, so it needs an external pull-up resistor. |
| 2 | VDD | power_in | Positive power supply input, specified from 1.0 V to 5.5 V. |
| 3 | VSS | power_in | Ground reference for the device. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-92-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 1 | 5.5 | V | 2 | ||
| Specified VDD Value to VOUT low | VDD | 1 | V | I RST = 10 µA, V RST < 0.2V | 2 | ||
| Operating Current | IDD | 1.75 | µA | 2 | |||
| VDD Trip Point MCP1XX-195 | VTRIP | 1.872 | 1.9 | 1.929 | V | TA = +25°C (Note 1) | 2 |
| VDD Trip Point MCP1XX-195 | VTRIP | 1.853 | 1.9 | 1.948 | V | TA = -40°C to +85°C (Note 2) | 2 |
| VDD Trip Point Tempco | TTPCO | -100 | 100 | ppm/°C | 2 | ||
| Threshold Hysteresis MCP1XX-195 | VHYS | 0.019 | 0.114 | V | TA = +25°C | 3 | |
| VOUT Low-level Output Voltage | VOL | 0.4 | V | IOL = 500 µA, VDD = VTRIP(MIN) | 3 | ||
| Open-drain High Voltage on Output | VODH | 13.5 | V | MCP111 only, VDD = 3.0V, Time voltage > 5.5V applied 100s, current into pin limited to 2 mA, +25°C operation recommended Note 3, Note 4 | 3 | ||
| Specified Temperature Range | TA | -40 | 85 | °C | MCP1XX-195 | 4 | |
| Storage Temperature Range | TA | -65 | 150 | °C | 4 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 4 | |||
| Input current (VDD) | 10 | mA | 2 | ||||
| Output current (RST) | 10 | mA | 2 | ||||
| Rated Rise Time of VDD | 100 | V/µs | 2 | ||||
| RST output w.r.t. VSS | -0.6 | 13.5 | V | 2 | |||
| Ambient temp. with power applied | -40 | 125 | °C | 2 | |||
| Thermal Resistance, 3L-TO-92 | JA | 131.9 | °C/W | 4 | |||
| VDD Detect to VOUT Inactive | tRPU | 90 | µs | Figure 1-1 and CL = 50 pF | 4 | ||
| VDD Detect to VOUT Active | tRPD | 130 | µs | VDD ramped from VTRIP(MAX) + 250 mV down to VTRIP(MIN), 250 mV, per Figure 1-1, CL = 50 pF (Note 1) | 4 | ||
| VOUT Rise Time After VOUT Active | tRT | 5 | µs | For VOUT 10% to 90% of final value per Figure 1-1, CL = 50 pF (Note 1) | 4 | ||
| Open-drain Output Leakage Current | IOD | 0.1 | µA | MCP111 only | 3 |
CAD (KiCad official)
- Symbol:
MCP111-195I - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92-3 (KiCad packages3D, STEP)
- 3D model files:
mcp111-195i-etched.step/mcp111-195i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp111-195i.step/mcp111-195i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (32 pp, sha256
8cfcaedafe808931, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MCP111-195I
**Microchip Tech** · Monitors & Reset Circuits · TO-92-3
MCP111-195I from Microchip Tech, in a TO-92-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Active-low reset output that is low when VDD is below VTRIP and goes high only when VDD rises above VTRIP + VHYS; it is open-drain on the MCP111, so it needs an external pull-up resistor. |
| 2 | VDD | power_in | Positive power supply input, specified from 1.0 V to 5.5 V. |
| 3 | VSS | power_in | Ground reference for the device. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-92-3 |
| Category | Power Supply Chip |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 1 | | 5.5 | V | | 2 |
| Specified VDD Value to VOUT low | VDD | 1 | | | V | I RST = 10 µA, V RST < 0.2V | 2 |
| Operating Current | IDD | | | 1.75 | µA | | 2 |
| VDD Trip Point MCP1XX-195 | VTRIP | 1.872 | 1.9 | 1.929 | V | TA = +25°C (Note 1) | 2 |
| VDD Trip Point MCP1XX-195 | VTRIP | 1.853 | 1.9 | 1.948 | V | TA = -40°C to +85°C (Note 2) | 2 |
| VDD Trip Point Tempco | TTPCO | -100 | | 100 | ppm/°C | | 2 |
| Threshold Hysteresis MCP1XX-195 | VHYS | 0.019 | | 0.114 | V | TA = +25°C | 3 |
| VOUT Low-level Output Voltage | VOL | | | 0.4 | V | IOL = 500 µA, VDD = VTRIP(MIN) | 3 |
| Open-drain High Voltage on Output | VODH | | | 13.5 | V | MCP111 only, VDD = 3.0V, Time voltage > 5.5V applied 100s, current into pin limited to 2 mA, +25°C operation recommended Note 3, Note 4 | 3 |
| Specified Temperature Range | TA | -40 | | 85 | °C | MCP1XX-195 | 4 |
| Storage Temperature Range | TA | -65 | | 150 | °C | | 4 |
| Maximum Junction Temperature | TJ | | | 150 | °C | | 4 |
| Input current (VDD) | | | | 10 | mA | | 2 |
| Output current (RST) | | | | 10 | mA | | 2 |
| Rated Rise Time of VDD | | | | 100 | V/µs | | 2 |
| RST output w.r.t. VSS | | -0.6 | | 13.5 | V | | 2 |
| Ambient temp. with power applied | | -40 | | 125 | °C | | 2 |
| Thermal Resistance, 3L-TO-92 | JA | | 131.9 | | °C/W | | 4 |
| VDD Detect to VOUT Inactive | tRPU | | 90 | | µs | Figure 1-1 and CL = 50 pF | 4 |
| VDD Detect to VOUT Active | tRPD | | 130 | | µs | VDD ramped from VTRIP(MAX) + 250 mV down to VTRIP(MIN), 250 mV, per Figure 1-1, CL = 50 pF (Note 1) | 4 |
| VOUT Rise Time After VOUT Active | tRT | | 5 | | µs | For VOUT 10% to 90% of final value per Figure 1-1, CL = 50 pF (Note 1) | 4 |
| Open-drain Output Leakage Current | IOD | | 0.1 | | µA | MCP111 only | 3 |
## CAD (KiCad official)
- Symbol: `MCP111-195I`
- Footprint: `Package_TO_SOT_THT:TO-92_Inline`
- 3D model: TO-92-3 (KiCad packages3D, STEP)
- 3D model files: `mcp111-195i-etched.step` / `mcp111-195i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mcp111-195i.step` / `mcp111-195i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/mcp111-195i-datasheet.pdf) (32 pp, sha256 `8cfcaedafe808931`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mcp111-195i-datasheet.pdf)