3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP100-315DI
Microchip Tech · Monitors & Reset Circuits · TO-92
MCP100-315DI from Microchip Tech, in a TO-92. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Push-pull active-low RESET output (MCP100) that is asserted whenever VDD is below the trip-point voltage and held for 350 ms (typical) after VDD rises above it, valid down to VDD = 1.0V. |
| 2 | VDD | power_in | Supply voltage input and monitored voltage, operating range 1.0V to 5.5V (7.0V absolute maximum); a 0.1 µF bypass capacitor close to this pin is recommended. |
| 3 | VSS | power_in | Ground reference pin for the device and the monitored supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-92 |
| Category | Power Supply Chip |
| Pins | 3 |
CAD (KiCad official)
- Symbol:
MCP100-315DI - Footprint:
Package_TO_SOT_THT:TO-92_Inline - 3D model: TO-92 (KiCad packages3D, STEP)
- 3D model files:
mcp100-315di-etched.step/mcp100-315di-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp100-315di.step/mcp100-315di.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (16 pp, sha256
2e50e62b4cee492f, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).