main
Ray Publish 0.1.1 2feba6d
{
  "schema_version": 1,
  "type": "component",
  "slug": "mc9s08aw48cfde",
  "title": "MC9S08AW48CFDE",
  "brief": "NXP Semicon NXP MCU, QFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "mc9s08aw48cfde",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MC9S08AW48CFDE",
    "manufacturer": "NXP Semicon",
    "package": "QFN-48-EP(7x7)",
    "pin_count": 49,
    "category": "Embedded Processors & Controllers",
    "subcategory": "NXP MCU",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/fdf7ea9315df7c9927883b49676b2eb0.pdf",
    "parts": {
      "symbol": "mc9s08aw48cfde.kicad_sym",
      "footprint": "mc9s08aw48cfde.kicad_mod",
      "model_3d": "mc9s08aw48cfde-hero.glb",
      "model_3d_plain": "mc9s08aw48cfde.glb",
      "model_3d_step": "mc9s08aw48cfde-etched.step",
      "model_3d_step_plain": "mc9s08aw48cfde.step",
      "lbr": "mc9s08aw48cfde.lbr"
    },
    "distributor_links": {
      "lcsc": "C1345490",
      "digikey": "2832-MC9S08AW48CFDE-ND",
      "mouser": "841-MC9S08AW48CFDE"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T16:25:25Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "2832-MC9S08AW48CFDE-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "841-MC9S08AW48CFDE",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PTC4",
        "type": "bidirectional",
        "description": "Port C general-purpose I/O bit 4 with software-selectable input pull-up, output slew-rate control and drive strength; no alternate function is listed for this pin."
      },
      {
        "number": "2",
        "name": "IRQ/TPMCLK",
        "type": "input",
        "description": "External interrupt request input (IRQ) with optional internal pull-up/pull-down; it has no clamp diode to VDD, so it must not be driven above VDD. Alternate function TPMCLK."
      },
      {
        "number": "3",
        "name": "RESET",
        "type": "input",
        "description": "Active-low reset input with internal pull-up and input hysteresis; a recommended external RC filter is suggested for EMC-sensitive designs."
      },
      {
        "number": "4",
        "name": "PTF0/TPM1CH2",
        "type": "bidirectional",
        "description": "Port F general-purpose I/O bit 0 with pull-up, slew-rate and drive-strength control; alternate function TPM1CH2."
      },
      {
        "number": "5",
        "name": "PTF1/TPM1CH3",
        "type": "bidirectional",
        "description": "Port F general-purpose I/O bit 1 with pull-up, slew-rate and drive-strength control; alternate function TPM1CH3."
      },
      {
        "number": "6",
        "name": "PTF4/TPM2CH0",
        "type": "bidirectional",
        "description": "Port F general-purpose I/O bit 4 with pull-up, slew-rate and drive-strength control; alternate function TPM2CH0."
      },
      {
        "number": "7",
        "name": "PTF5/TPM2CH1",
        "type": "bidirectional",
        "description": "Port F general-purpose I/O bit 5 with pull-up, slew-rate and drive-strength control; alternate function TPM2CH1."
      },
      {
        "number": "8",
        "name": "PTF6",
        "type": "bidirectional",
        "description": "Port F general-purpose I/O bit 6 with pull-up, slew-rate and drive-strength control; no alternate function is listed for this pin."
      },
      {
        "number": "9",
        "name": "PTE0/TxD1",
        "type": "bidirectional",
        "description": "Port E general-purpose I/O bit 0 with pull-up, slew-rate and drive-strength control; alternate function SCI1 transmit (TxD1)."
      },
      {
        "number": "10",
        "name": "PTE1/RxD1",
        "type": "bidirectional",
        "description": "Port E general-purpose I/O bit 1 with pull-up, slew-rate and drive-strength control; alternate function SCI1 receive (RxD1)."
      },
      {
        "number": "11",
        "name": "PTE2/TPM1CH0",
        "type": "bidirectional",
        "description": "Port E general-purpose I/O bit 2 with pull-up, slew-rate and drive-strength control; alternate function TPM1CH0."
      },
      {
        "number": "12",
        "name": "PTE3/TPM1CH1",
        "type": "bidirectional",
        "description": "Port E general-purpose I/O bit 3 with pull-up, slew-rate and drive-strength control; alternate function TPM1CH1."
      },
      {
        "number": "13",
        "name": "PTE4/SS1",
        "type": "bidirectional",
        "description": "Port E general-purpose I/O bit 4 with pull-up, slew-rate and drive-strength control; alternate function SPI slave select (SS1)."
      },
      {
        "number": "14",
        "name": "PTE5/MISO1",
        "type": "bidirectional",
        "description": "Port E general-purpose I/O bit 5 with pull-up, slew-rate and drive-strength control; alternate function SPI MISO1."
      },
      {
        "number": "15",
        "name": "PTE6/MOSI1",
        "type": "bidirectional",
        "description": "Port E general-purpose I/O bit 6 with pull-up, slew-rate and drive-strength control; alternate function SPI MOSI1."
      },
      {
        "number": "16",
        "name": "PTE7/SPSCK1",
        "type": "bidirectional",
        "description": "Port E general-purpose I/O bit 7 with pull-up, slew-rate and drive-strength control; alternate function SPI clock SPSCK1."
      },
      {
        "number": "17",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground supply pin for the MCU core and I/O buffers."
      },
      {
        "number": "18",
        "name": "VDD",
        "type": "power_in",
        "description": "Main positive power supply pin; supplies all I/O buffers and the internal voltage regulator, with a 0.1 µF ceramic bypass recommended close to VDD/VSS."
      },
      {
        "number": "19",
        "name": "PTG0/KBIP0",
        "type": "bidirectional",
        "description": "Port G general-purpose I/O bit 0 with pull-up, slew-rate and drive-strength control; alternate function keyboard interrupt KBIP0."
      },
      {
        "number": "20",
        "name": "PTG1/KBIP1",
        "type": "bidirectional",
        "description": "Port G general-purpose I/O bit 1 with pull-up, slew-rate and drive-strength control; alternate function keyboard interrupt KBIP1."
      },
      {
        "number": "21",
        "name": "PTG2/KBIP2",
        "type": "bidirectional",
        "description": "Port G general-purpose I/O bit 2 with pull-up, slew-rate and drive-strength control; alternate function keyboard interrupt KBIP2."
      },
      {
        "number": "22",
        "name": "PTA0",
        "type": "bidirectional",
        "description": "Port A general-purpose I/O bit 0 with pull-up, slew-rate and drive-strength control; no alternate function is listed for this pin."
      },
      {
        "number": "23",
        "name": "PTA1",
        "type": "bidirectional",
        "description": "Port A general-purpose I/O bit 1 with pull-up, slew-rate and drive-strength control; no alternate function is listed for this pin."
      },
      {
        "number": "24",
        "name": "PTA2",
        "type": "bidirectional",
        "description": "Port A general-purpose I/O bit 2 with pull-up, slew-rate and drive-strength control; this pin is listed only in the 48-pin package."
      },
      {
        "number": "25",
        "name": "PTA7",
        "type": "bidirectional",
        "description": "Port A general-purpose I/O bit 7 with pull-up, slew-rate and drive-strength control; this pin is listed only in the 48-pin package."
      },
      {
        "number": "26",
        "name": "PTB0/TPM3CH0/AD1P0",
        "type": "bidirectional",
        "description": "Port B general-purpose I/O bit 0 shared with ADC input AD0 and TPM3CH0; TPM3 is not available on AW-series devices, so only the ADC and GPIO functions apply."
      },
      {
        "number": "27",
        "name": "PTB1/TPM3CH1/AD1P1",
        "type": "bidirectional",
        "description": "Port B general-purpose I/O bit 1 shared with ADC input AD1 and TPM3CH1; TPM3 is not available on AW-series devices, so only the ADC and GPIO functions apply."
      },
      {
        "number": "28",
        "name": "PTB2/AD1P2",
        "type": "bidirectional",
        "description": "Port B general-purpose I/O bit 2 shared with ADC input AD2; when used as an analog input the digital I/O function is disabled."
      },
      {
        "number": "29",
        "name": "PTB3/AD1P3",
        "type": "bidirectional",
        "description": "Port B general-purpose I/O bit 3 shared with ADC input AD3; when used as an analog input the digital I/O function is disabled."
      },
      {
        "number": "30",
        "name": "PTD0/AD1P8",
        "type": "bidirectional",
        "description": "Port D general-purpose I/O bit 0 shared with ADC input AD8; when used as an analog input the digital I/O function is disabled."
      },
      {
        "number": "31",
        "name": "PTD1/AD1P9",
        "type": "bidirectional",
        "description": "Port D general-purpose I/O bit 1 shared with ADC input AD9; when used as an analog input the digital I/O function is disabled."
      },
      {
        "number": "32",
        "name": "VDDAD",
        "type": "power_in",
        "description": "Positive supply for the ADC analog section, to be kept at the same voltage as VDD and bypassed with a 0.1 µF ceramic capacitor placed close to the pin."
      },
      {
        "number": "33",
        "name": "VSSAD",
        "type": "power_in",
        "description": "Ground for the ADC analog section, to be connected to VSS at the same voltage."
      },
      {
        "number": "34",
        "name": "PTD2/AD1P10/KBIP5",
        "type": "bidirectional",
        "description": "Port D general-purpose I/O bit 2 shared with ADC input AD10 and keyboard interrupt KBIP5; when used as an analog input the digital I/O function is disabled."
      },
      {
        "number": "35",
        "name": "PTD3/AD1P11/KBIP6",
        "type": "bidirectional",
        "description": "Port D general-purpose I/O bit 3 shared with ADC input AD11 and keyboard interrupt KBIP6; when used as an analog input the digital I/O function is disabled."
      },
      {
        "number": "36",
        "name": "PTG3/KBIP3",
        "type": "bidirectional",
        "description": "Port G general-purpose I/O bit 3 with pull-up, slew-rate and drive-strength control; alternate function keyboard interrupt KBIP3."
      },
      {
        "number": "37",
        "name": "PTG4/KBIP4",
        "type": "bidirectional",
        "description": "Port G general-purpose I/O bit 4 with pull-up, slew-rate and drive-strength control; alternate function keyboard interrupt KBIP4 (listed only in the 48-pin package)."
      },
      {
        "number": "38",
        "name": "VREFH",
        "type": "power_in",
        "description": "ADC high reference voltage input, which must not exceed VDDAD."
      },
      {
        "number": "39",
        "name": "VREFL",
        "type": "power_in",
        "description": "ADC low reference voltage input, to be connected to VSSAD at the same voltage."
      },
      {
        "number": "40",
        "name": "BKGD/MS",
        "type": "bidirectional",
        "description": "Background debug and mode-select pin: sampled low on the rising edge of reset to enter background mode, otherwise it operates as the single-wire background debug pin with an internal pull-up."
      },
      {
        "number": "41",
        "name": "PTG5/XTAL",
        "type": "bidirectional",
        "description": "Port G general-purpose I/O bit 5 that becomes the oscillator XTAL output when the external crystal/resonator is enabled."
      },
      {
        "number": "42",
        "name": "PTG6/EXTAL",
        "type": "bidirectional",
        "description": "Port G general-purpose I/O bit 6 that becomes the oscillator EXTAL input (external clock or crystal/resonator) when the external oscillator is enabled."
      },
      {
        "number": "43",
        "name": "VSS",
        "type": "power_in",
        "description": "Second ground pin, to be connected to system ground or a low-impedance path to the main VSS pin."
      },
      {
        "number": "44",
        "name": "PTC0/SCL1",
        "type": "bidirectional",
        "description": "Port C general-purpose I/O bit 0 with pull-up, slew-rate and drive-strength control; alternate function IIC clock SCL1."
      },
      {
        "number": "45",
        "name": "PTC1/SDA1",
        "type": "bidirectional",
        "description": "Port C general-purpose I/O bit 1 with pull-up, slew-rate and drive-strength control; alternate function IIC data SDA1."
      },
      {
        "number": "46",
        "name": "PTC2/MCLK",
        "type": "bidirectional",
        "description": "Port C general-purpose I/O bit 2 with pull-up, slew-rate and drive-strength control; alternate function MCLK clock output."
      },
      {
        "number": "47",
        "name": "PTC3/TxD2",
        "type": "bidirectional",
        "description": "Port C general-purpose I/O bit 3 with pull-up, slew-rate and drive-strength control; alternate function SCI2 transmit (TxD2)."
      },
      {
        "number": "48",
        "name": "PTC5/RxD2",
        "type": "bidirectional",
        "description": "Port C general-purpose I/O bit 5 with pull-up, slew-rate and drive-strength control; alternate function SCI2 receive (RxD2)."
      },
      {
        "number": "49",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The MPN MC9S08AW48CFDE does not appear in this datasheet. It covers MC9S08AC16, MC9S08AC8, MC9S08AW1; The package hint 'QFN-48-EP(7x7)' is not stated in the text. Appendix B lists the 48-pin QFN as pack; Figure 2-1 (48-pin QFN drawing, page 25) is garbled in the extracted text, so pin numbers were taken",
          "exposed pad 49 added from the footprint"
        ],
        "pages_sent": 207,
        "cost_usd": 1.8594,
        "at": "2026-10-30T16:25:08"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/fdf7ea9315df7c9927883b49676b2eb0.pdf",
        "pages": 296,
        "sha256": "a02b13679de67119",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 49,
        "described": 49,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mc9s08aw48cfde.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7,
          7,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "f2b38b0b4bf967c77e683e8d4599608b9f0503055ec535b93c4ebb5d0163e916",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mc9s08aw48cfde-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7,
          7,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2ae9a70aa9ad134818f8ab829a8f1b073f47ed3cf7199fb6ae2e07959358bb17",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "NXP Semicon",
      "Package": "QFN-48-EP(7x7)",
      "Category": "Embedded Processors & Controllers",
      "Pins": "49"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "mc9s08aw48cfde"
  ],
  "discovery_pitch": "MC9S08AW48CFDE (NXP Semicon) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mc9s08aw48cfde.kicad_sym",
    "mc9s08aw48cfde.kicad_mod",
    "mc9s08aw48cfde.glb",
    "mc9s08aw48cfde.step",
    "mc9s08aw48cfde.lbr",
    "docs/hero.png",
    "docs/mc9s08aw48cfde-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mc9s08aw48cfde-hero.glb",
    "mc9s08aw48cfde-hero.overlay.json",
    "mc9s08aw48cfde-etched.glb",
    "mc9s08aw48cfde-etched.step"
  ],
  "visibility": "public",
  "description": "NXP Semicon NXP MCU, QFN-48-EP(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}