main
Ray Publish 0.1.0 32adb48

MC9S08AW48CFDE

NXP Semicon · NXP MCU · QFN-48-EP(7x7)

MC9S08AW48CFDE from NXP Semicon, in a QFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PTC4 bidirectional Port C general-purpose I/O bit 4 with software-selectable input pull-up, output slew-rate control and drive strength; no alternate function is listed for this pin.
2 IRQ/TPMCLK input External interrupt request input (IRQ) with optional internal pull-up/pull-down; it has no clamp diode to VDD, so it must not be driven above VDD. Alternate function TPMCLK.
3 RESET input Active-low reset input with internal pull-up and input hysteresis; a recommended external RC filter is suggested for EMC-sensitive designs.
4 PTF0/TPM1CH2 bidirectional Port F general-purpose I/O bit 0 with pull-up, slew-rate and drive-strength control; alternate function TPM1CH2.
5 PTF1/TPM1CH3 bidirectional Port F general-purpose I/O bit 1 with pull-up, slew-rate and drive-strength control; alternate function TPM1CH3.
6 PTF4/TPM2CH0 bidirectional Port F general-purpose I/O bit 4 with pull-up, slew-rate and drive-strength control; alternate function TPM2CH0.
7 PTF5/TPM2CH1 bidirectional Port F general-purpose I/O bit 5 with pull-up, slew-rate and drive-strength control; alternate function TPM2CH1.
8 PTF6 bidirectional Port F general-purpose I/O bit 6 with pull-up, slew-rate and drive-strength control; no alternate function is listed for this pin.
9 PTE0/TxD1 bidirectional Port E general-purpose I/O bit 0 with pull-up, slew-rate and drive-strength control; alternate function SCI1 transmit (TxD1).
10 PTE1/RxD1 bidirectional Port E general-purpose I/O bit 1 with pull-up, slew-rate and drive-strength control; alternate function SCI1 receive (RxD1).
11 PTE2/TPM1CH0 bidirectional Port E general-purpose I/O bit 2 with pull-up, slew-rate and drive-strength control; alternate function TPM1CH0.
12 PTE3/TPM1CH1 bidirectional Port E general-purpose I/O bit 3 with pull-up, slew-rate and drive-strength control; alternate function TPM1CH1.
13 PTE4/SS1 bidirectional Port E general-purpose I/O bit 4 with pull-up, slew-rate and drive-strength control; alternate function SPI slave select (SS1).
14 PTE5/MISO1 bidirectional Port E general-purpose I/O bit 5 with pull-up, slew-rate and drive-strength control; alternate function SPI MISO1.
15 PTE6/MOSI1 bidirectional Port E general-purpose I/O bit 6 with pull-up, slew-rate and drive-strength control; alternate function SPI MOSI1.
16 PTE7/SPSCK1 bidirectional Port E general-purpose I/O bit 7 with pull-up, slew-rate and drive-strength control; alternate function SPI clock SPSCK1.
17 VSS power_in Ground supply pin for the MCU core and I/O buffers.
18 VDD power_in Main positive power supply pin; supplies all I/O buffers and the internal voltage regulator, with a 0.1 µF ceramic bypass recommended close to VDD/VSS.
19 PTG0/KBIP0 bidirectional Port G general-purpose I/O bit 0 with pull-up, slew-rate and drive-strength control; alternate function keyboard interrupt KBIP0.
20 PTG1/KBIP1 bidirectional Port G general-purpose I/O bit 1 with pull-up, slew-rate and drive-strength control; alternate function keyboard interrupt KBIP1.
21 PTG2/KBIP2 bidirectional Port G general-purpose I/O bit 2 with pull-up, slew-rate and drive-strength control; alternate function keyboard interrupt KBIP2.
22 PTA0 bidirectional Port A general-purpose I/O bit 0 with pull-up, slew-rate and drive-strength control; no alternate function is listed for this pin.
23 PTA1 bidirectional Port A general-purpose I/O bit 1 with pull-up, slew-rate and drive-strength control; no alternate function is listed for this pin.
24 PTA2 bidirectional Port A general-purpose I/O bit 2 with pull-up, slew-rate and drive-strength control; this pin is listed only in the 48-pin package.
25 PTA7 bidirectional Port A general-purpose I/O bit 7 with pull-up, slew-rate and drive-strength control; this pin is listed only in the 48-pin package.
26 PTB0/TPM3CH0/AD1P0 bidirectional Port B general-purpose I/O bit 0 shared with ADC input AD0 and TPM3CH0; TPM3 is not available on AW-series devices, so only the ADC and GPIO functions apply.
27 PTB1/TPM3CH1/AD1P1 bidirectional Port B general-purpose I/O bit 1 shared with ADC input AD1 and TPM3CH1; TPM3 is not available on AW-series devices, so only the ADC and GPIO functions apply.
28 PTB2/AD1P2 bidirectional Port B general-purpose I/O bit 2 shared with ADC input AD2; when used as an analog input the digital I/O function is disabled.
29 PTB3/AD1P3 bidirectional Port B general-purpose I/O bit 3 shared with ADC input AD3; when used as an analog input the digital I/O function is disabled.
30 PTD0/AD1P8 bidirectional Port D general-purpose I/O bit 0 shared with ADC input AD8; when used as an analog input the digital I/O function is disabled.
31 PTD1/AD1P9 bidirectional Port D general-purpose I/O bit 1 shared with ADC input AD9; when used as an analog input the digital I/O function is disabled.
32 VDDAD power_in Positive supply for the ADC analog section, to be kept at the same voltage as VDD and bypassed with a 0.1 µF ceramic capacitor placed close to the pin.
33 VSSAD power_in Ground for the ADC analog section, to be connected to VSS at the same voltage.
34 PTD2/AD1P10/KBIP5 bidirectional Port D general-purpose I/O bit 2 shared with ADC input AD10 and keyboard interrupt KBIP5; when used as an analog input the digital I/O function is disabled.
35 PTD3/AD1P11/KBIP6 bidirectional Port D general-purpose I/O bit 3 shared with ADC input AD11 and keyboard interrupt KBIP6; when used as an analog input the digital I/O function is disabled.
36 PTG3/KBIP3 bidirectional Port G general-purpose I/O bit 3 with pull-up, slew-rate and drive-strength control; alternate function keyboard interrupt KBIP3.
37 PTG4/KBIP4 bidirectional Port G general-purpose I/O bit 4 with pull-up, slew-rate and drive-strength control; alternate function keyboard interrupt KBIP4 (listed only in the 48-pin package).
38 VREFH power_in ADC high reference voltage input, which must not exceed VDDAD.
39 VREFL power_in ADC low reference voltage input, to be connected to VSSAD at the same voltage.
40 BKGD/MS bidirectional Background debug and mode-select pin: sampled low on the rising edge of reset to enter background mode, otherwise it operates as the single-wire background debug pin with an internal pull-up.
41 PTG5/XTAL bidirectional Port G general-purpose I/O bit 5 that becomes the oscillator XTAL output when the external crystal/resonator is enabled.
42 PTG6/EXTAL bidirectional Port G general-purpose I/O bit 6 that becomes the oscillator EXTAL input (external clock or crystal/resonator) when the external oscillator is enabled.
43 VSS power_in Second ground pin, to be connected to system ground or a low-impedance path to the main VSS pin.
44 PTC0/SCL1 bidirectional Port C general-purpose I/O bit 0 with pull-up, slew-rate and drive-strength control; alternate function IIC clock SCL1.
45 PTC1/SDA1 bidirectional Port C general-purpose I/O bit 1 with pull-up, slew-rate and drive-strength control; alternate function IIC data SDA1.
46 PTC2/MCLK bidirectional Port C general-purpose I/O bit 2 with pull-up, slew-rate and drive-strength control; alternate function MCLK clock output.
47 PTC3/TxD2 bidirectional Port C general-purpose I/O bit 3 with pull-up, slew-rate and drive-strength control; alternate function SCI2 transmit (TxD2).
48 PTC5/RxD2 bidirectional Port C general-purpose I/O bit 5 with pull-up, slew-rate and drive-strength control; alternate function SCI2 receive (RxD2).
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package QFN-48-EP(7x7)
Category Embedded Processors & Controllers
Pins 49

CAD (KiCad official)

  • Symbol: MC9S08AW48CFDE
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: QFN-48-EP(7x7) (KiCad packages3D, STEP)
  • 3D model files: mc9s08aw48cfde-etched.step / mc9s08aw48cfde-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc9s08aw48cfde.step / mc9s08aw48cfde.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (296 pp, sha256 a02b13679de67119, retrieved 2026-10-30, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF