main
Ray
Publish 0.1.0
07f3f4c
MC9S08AC32CFJE
NXP Semicon · NXP MCU · LQFP-32(7x7)
MC9S08AC32CFJE from NXP Semicon, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IRQ/TPMCLK | input | External interrupt request input (no clamp diode to VDD, so it must not exceed VDD) that also serves as the external TPM clock input. |
| 2 | RESET | bidirectional | Dedicated active-low reset pin with internal pull-up, input hysteresis and strong output drive, pulled low about 34 bus cycles on any reset. |
| 3 | PTF4/TPM2CH0 | bidirectional | Port F bit 4 general-purpose I/O, multiplexed with TPM2 channel 0. |
| 4 | PTF5/TPM2CH1 | bidirectional | Port F bit 5 general-purpose I/O, multiplexed with TPM2 channel 1. |
| 5 | PTE0/TxD1 | bidirectional | Port E bit 0 general-purpose I/O, multiplexed with SCI1 transmit data. |
| 6 | PTE1/RxD1 | bidirectional | Port E bit 1 general-purpose I/O, multiplexed with SCI1 receive data. |
| 7 | PTE2/TPM1CH0 | bidirectional | Port E bit 2 general-purpose I/O, multiplexed with TPM1 channel 0. |
| 8 | PTE3/TPM1CH1 | bidirectional | Port E bit 3 general-purpose I/O, multiplexed with TPM1 channel 1. |
| 9 | PTE4/SS1 | bidirectional | Port E bit 4 general-purpose I/O, multiplexed with SPI slave select. |
| 10 | PTE5/MISO1 | bidirectional | Port E bit 5 general-purpose I/O, multiplexed with SPI master-in/slave-out. |
| 11 | PTE6/MOSI1 | bidirectional | Port E bit 6 general-purpose I/O, multiplexed with SPI master-out/slave-in. |
| 12 | PTE7/SPSCK1 | bidirectional | Port E bit 7 general-purpose I/O, multiplexed with SPI serial clock. |
| 13 | VSS | power_in | Primary ground pin for the MCU I/O buffers and internal voltage regulator, with a 0.1 uF bypass capacitor placed close to VDD/VSS. |
| 14 | VDD | power_in | Main positive supply for I/O buffers and the internal voltage regulator, decoupled with a 0.1 uF ceramic capacitor close to the pin. |
| 15 | PTG0/KBIP0 | bidirectional | Port G bit 0 general-purpose I/O, multiplexed with keyboard interrupt input 0 (falling edge/low level). |
| 16 | PTG1/KBIP1 | bidirectional | Port G bit 1 general-purpose I/O, multiplexed with keyboard interrupt input 1 (falling edge/low level). |
| 17 | PTB0/TPM3CH0/AD1P0 | bidirectional | Port B bit 0 general-purpose I/O, multiplexed with TPM3 channel 0 and ADC input AD0; enabling analog input disables the digital function. |
| 18 | PTB1/TPM3CH1/AD1P1 | bidirectional | Port B bit 1 general-purpose I/O, multiplexed with TPM3 channel 1 and ADC input AD1; enabling analog input disables the digital function. |
| 19 | PTB2/AD1P2 | bidirectional | Port B bit 2 general-purpose I/O, multiplexed with ADC input AD2. |
| 20 | PTB3/AD1P3 | bidirectional | Port B bit 3 general-purpose I/O, multiplexed with ADC input AD3. |
| 21 | VDDAD | power_in | Analog supply for the ADC module, internally connected to VDD in some packages, with a 0.1 uF bypass capacitor close to the pin. |
| 22 | VSSAD | power_in | Analog ground for the ADC module, to be connected to the same potential as VSS with a 0.1 uF bypass capacitor close to the pin. |
| 23 | PTD2/AD1P10/KBIP5 | bidirectional | Port D bit 2 general-purpose I/O, multiplexed with ADC input AD10 and keyboard interrupt 5, which has pull-up/pull-down device. |
| 24 | PTD3/AD1P11/KBIP6 | bidirectional | Port D bit 3 general-purpose I/O, multiplexed with ADC input AD11 and keyboard interrupt 6, which has pull-up/pull-down device. |
| 25 | VREFH | input | ADC high reference voltage input, to be tied to VDDAD or driven between minimum VDDAD and VDDAD. |
| 26 | VREFL | input | ADC low reference voltage input, normally connected to VSSAD. |
| 27 | BKGD/MS | bidirectional | Background debug communication pin that selects mode at reset, with internal pull-up, input hysteresis and no output slew control; avoid large capacitance on it. |
| 28 | PTG5/XTAL | bidirectional | Port G bit 5 general-purpose I/O, or oscillator output (XTAL) when the external crystal is enabled. |
| 29 | PTG6/EXTAL | bidirectional | Port G bit 6 general-purpose I/O, or external clock/oscillator input (EXTAL) when enabled. |
| 30 | VSS | power_in | Secondary VSS pin, to be connected to system ground or through a low-impedance connection to the primary VSS pin. |
| 31 | PTC0/SCL1 | bidirectional | Port C bit 0 general-purpose I/O, multiplexed with IIC serial clock line. |
| 32 | PTC1/SDA1 | bidirectional | Port C bit 1 general-purpose I/O, multiplexed with IIC serial data line. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
CAD (KiCad official)
- Symbol:
MC9S08AC32CFJE - Footprint:
Package_QFP:LQFP-32_7x7mm_P0.8mm - 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files:
mc9s08ac32cfje-etched.step/mc9s08ac32cfje-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc9s08ac32cfje.step/mc9s08ac32cfje.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (296 pp, sha256
a02b13679de67119, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MC9S08AC32CFJE
**NXP Semicon** · NXP MCU · LQFP-32(7x7)
MC9S08AC32CFJE from NXP Semicon, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IRQ/TPMCLK | input | External interrupt request input (no clamp diode to VDD, so it must not exceed VDD) that also serves as the external TPM clock input. |
| 2 | RESET | bidirectional | Dedicated active-low reset pin with internal pull-up, input hysteresis and strong output drive, pulled low about 34 bus cycles on any reset. |
| 3 | PTF4/TPM2CH0 | bidirectional | Port F bit 4 general-purpose I/O, multiplexed with TPM2 channel 0. |
| 4 | PTF5/TPM2CH1 | bidirectional | Port F bit 5 general-purpose I/O, multiplexed with TPM2 channel 1. |
| 5 | PTE0/TxD1 | bidirectional | Port E bit 0 general-purpose I/O, multiplexed with SCI1 transmit data. |
| 6 | PTE1/RxD1 | bidirectional | Port E bit 1 general-purpose I/O, multiplexed with SCI1 receive data. |
| 7 | PTE2/TPM1CH0 | bidirectional | Port E bit 2 general-purpose I/O, multiplexed with TPM1 channel 0. |
| 8 | PTE3/TPM1CH1 | bidirectional | Port E bit 3 general-purpose I/O, multiplexed with TPM1 channel 1. |
| 9 | PTE4/SS1 | bidirectional | Port E bit 4 general-purpose I/O, multiplexed with SPI slave select. |
| 10 | PTE5/MISO1 | bidirectional | Port E bit 5 general-purpose I/O, multiplexed with SPI master-in/slave-out. |
| 11 | PTE6/MOSI1 | bidirectional | Port E bit 6 general-purpose I/O, multiplexed with SPI master-out/slave-in. |
| 12 | PTE7/SPSCK1 | bidirectional | Port E bit 7 general-purpose I/O, multiplexed with SPI serial clock. |
| 13 | VSS | power_in | Primary ground pin for the MCU I/O buffers and internal voltage regulator, with a 0.1 uF bypass capacitor placed close to VDD/VSS. |
| 14 | VDD | power_in | Main positive supply for I/O buffers and the internal voltage regulator, decoupled with a 0.1 uF ceramic capacitor close to the pin. |
| 15 | PTG0/KBIP0 | bidirectional | Port G bit 0 general-purpose I/O, multiplexed with keyboard interrupt input 0 (falling edge/low level). |
| 16 | PTG1/KBIP1 | bidirectional | Port G bit 1 general-purpose I/O, multiplexed with keyboard interrupt input 1 (falling edge/low level). |
| 17 | PTB0/TPM3CH0/AD1P0 | bidirectional | Port B bit 0 general-purpose I/O, multiplexed with TPM3 channel 0 and ADC input AD0; enabling analog input disables the digital function. |
| 18 | PTB1/TPM3CH1/AD1P1 | bidirectional | Port B bit 1 general-purpose I/O, multiplexed with TPM3 channel 1 and ADC input AD1; enabling analog input disables the digital function. |
| 19 | PTB2/AD1P2 | bidirectional | Port B bit 2 general-purpose I/O, multiplexed with ADC input AD2. |
| 20 | PTB3/AD1P3 | bidirectional | Port B bit 3 general-purpose I/O, multiplexed with ADC input AD3. |
| 21 | VDDAD | power_in | Analog supply for the ADC module, internally connected to VDD in some packages, with a 0.1 uF bypass capacitor close to the pin. |
| 22 | VSSAD | power_in | Analog ground for the ADC module, to be connected to the same potential as VSS with a 0.1 uF bypass capacitor close to the pin. |
| 23 | PTD2/AD1P10/KBIP5 | bidirectional | Port D bit 2 general-purpose I/O, multiplexed with ADC input AD10 and keyboard interrupt 5, which has pull-up/pull-down device. |
| 24 | PTD3/AD1P11/KBIP6 | bidirectional | Port D bit 3 general-purpose I/O, multiplexed with ADC input AD11 and keyboard interrupt 6, which has pull-up/pull-down device. |
| 25 | VREFH | input | ADC high reference voltage input, to be tied to VDDAD or driven between minimum VDDAD and VDDAD. |
| 26 | VREFL | input | ADC low reference voltage input, normally connected to VSSAD. |
| 27 | BKGD/MS | bidirectional | Background debug communication pin that selects mode at reset, with internal pull-up, input hysteresis and no output slew control; avoid large capacitance on it. |
| 28 | PTG5/XTAL | bidirectional | Port G bit 5 general-purpose I/O, or oscillator output (XTAL) when the external crystal is enabled. |
| 29 | PTG6/EXTAL | bidirectional | Port G bit 6 general-purpose I/O, or external clock/oscillator input (EXTAL) when enabled. |
| 30 | VSS | power_in | Secondary VSS pin, to be connected to system ground or through a low-impedance connection to the primary VSS pin. |
| 31 | PTC0/SCL1 | bidirectional | Port C bit 0 general-purpose I/O, multiplexed with IIC serial clock line. |
| 32 | PTC1/SDA1 | bidirectional | Port C bit 1 general-purpose I/O, multiplexed with IIC serial data line. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-32(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 32 |
## CAD (KiCad official)
- Symbol: `MC9S08AC32CFJE`
- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`
- 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
- 3D model files: `mc9s08ac32cfje-etched.step` / `mc9s08ac32cfje-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mc9s08ac32cfje.step` / `mc9s08ac32cfje.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [NXP Semicon datasheet](docs/mc9s08ac32cfje-datasheet.pdf) (296 pp, sha256 `a02b13679de67119`, retrieved 2026-11-07, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mc9s08ac32cfje-datasheet.pdf)