main
Ray
mc7912bd2tr4g: laser-etched CAD + chip hero (factory 2.0.0 backfill)
aaf6f17
MC7912BD2TR4G
onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · D2PAK
MC7912BD2TR4G from onsemi, in a D2PAK. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference. Common ground required between input and output voltages. In the D2PAK package, the heatsink tab (shown as terminal 4 in the case outline) is internally connected to Pin 2 (Input), NOT to this ground pin. |
| 2 | VI | power_in | Negative input voltage. Must remain typically 2.0 V more negative than VO even during the high point of the input ripple (dropout ≈ 1.3 V typ at IO = 1.0 A). Absolute maximum VI = −35 Vdc for the −12 V option. Recommended input bypass: 0.33 μF tantalum or equivalent low-ESR cap mounted with short leads. |
| 3 | VO | power_out | Regulated −12 V output. Nominal VO = −12 V with ±4% tolerance (VO = −11.5 V to −12.5 V at TJ = +25°C for the MC7912B grade). Delivers >1.0 A with adequate heatsinking; internally current-limited and thermally protected. A 1.0 μF output capacitor is recommended for stability and transient response. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | D2PAK |
| Category | PMIC |
| Pins | 3 |
Ordering variants
MC7912BD2TR4GMC7912BD2TR4GBD2TGMC7912BD2TR4GACD2TMC7912BD2TR4GACD2TGMC7912BD2TR4GACD2TR4MC7912BD2TR4GACD2TR4GMC7912BD2TR4GCD2TMC7912BD2TR4GCD2TGMC7912BD2TR4GCD2TR4MC7912BD2TR4GCD2TR4GMC7912BD2TR4GBTMC7912BD2TR4GBTGMC7912BD2TR4GACTMC7912BD2TR4GACTGMC7912BD2TR4GCTMC7912BD2TR4GCTG
CAD (KiCad official)
- Symbol:
MC7912BD2TR4G - Footprint:
Package_TO_SOT_SMD:TO-263-2 - 3D model: D2PAK (KiCad packages3D, STEP)
- 3D model files:
mc7912bd2tr4g-etched.step/mc7912bd2tr4g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc7912bd2tr4g.step/mc7912bd2tr4g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (None pp, sha256
01e22db47f1a6088, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MC7912BD2TR4G
**onsemi** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · D2PAK
MC7912BD2TR4G from onsemi, in a D2PAK. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference. Common ground required between input and output voltages. In the D2PAK package, the heatsink tab (shown as terminal 4 in the case outline) is internally connected to Pin 2 (Input), NOT to this ground pin. |
| 2 | VI | power_in | Negative input voltage. Must remain typically 2.0 V more negative than VO even during the high point of the input ripple (dropout ≈ 1.3 V typ at IO = 1.0 A). Absolute maximum VI = −35 Vdc for the −12 V option. Recommended input bypass: 0.33 μF tantalum or equivalent low-ESR cap mounted with short leads. |
| 3 | VO | power_out | Regulated −12 V output. Nominal VO = −12 V with ±4% tolerance (VO = −11.5 V to −12.5 V at TJ = +25°C for the MC7912B grade). Delivers >1.0 A with adequate heatsinking; internally current-limited and thermally protected. A 1.0 μF output capacitor is recommended for stability and transient response. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | D2PAK |
| Category | PMIC |
| Pins | 3 |
## Ordering variants
- `MC7912BD2TR4G`
- `MC7912BD2TR4GBD2TG`
- `MC7912BD2TR4GACD2T`
- `MC7912BD2TR4GACD2TG`
- `MC7912BD2TR4GACD2TR4`
- `MC7912BD2TR4GACD2TR4G`
- `MC7912BD2TR4GCD2T`
- `MC7912BD2TR4GCD2TG`
- `MC7912BD2TR4GCD2TR4`
- `MC7912BD2TR4GCD2TR4G`
- `MC7912BD2TR4GBT`
- `MC7912BD2TR4GBTG`
- `MC7912BD2TR4GACT`
- `MC7912BD2TR4GACTG`
- `MC7912BD2TR4GCT`
- `MC7912BD2TR4GCTG`
## CAD (KiCad official)
- Symbol: `MC7912BD2TR4G`
- Footprint: `Package_TO_SOT_SMD:TO-263-2`
- 3D model: D2PAK (KiCad packages3D, STEP)
- 3D model files: `mc7912bd2tr4g-etched.step` / `mc7912bd2tr4g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mc7912bd2tr4g.step` / `mc7912bd2tr4g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc7912bd2tr4-d.pdf) (None pp, sha256 `01e22db47f1a6088`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mc7912bd2tr4g-datasheet.pdf)