3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMC7818CD2TR4G
onsemi · Linear Voltage Regulators (LDO) · D2PAK
MC7818CD2TR4G from onsemi, in a D2PAK. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Input | power_in | Unregulated input voltage pin; the input must remain typically 2.0 V above the output voltage even at the low point of the input ripple, and the datasheet lists a maximum input voltage of 35 Vdc for the 5.0 to 18 V series ratings. |
| 2 | Ground | power_in | Common ground pin, which must be common between input and output, and to which the heatsink surface (terminal 4 tab) is connected. |
| 3 | Output | power_out | Regulated output pin, which delivers the fixed 18 V output for the MC7818 and can supply output currents in excess of 1.0 A with adequate heatsinking. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | D2PAK |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (TJ = 25°C) | VO | 17.3 | 18 | 18.7 | Vdc | TJ = 25°C | 13 |
| Output Voltage (5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W) | VO | 17.1 | 18 | 18.9 | Vdc | 5.0 mA ≤ IO ≤ 1.0 A, PD ≤ 15 W; 21 Vdc ≤ Vin ≤ 33 Vdc | 13 |
| Line Regulation | Regline | 9.5 | 50 | mV | 21 Vdc ≤ Vin ≤ 33 Vdc | 13 | |
| Line Regulation | Regline | 3.2 | 25 | mV | 24 Vdc ≤ Vin ≤ 30 Vdc | 13 | |
| Load Regulation | Regload | 2 | 55 | mV | 5.0 mA ≤ IO ≤ 1.5 A | 13 | |
| Quiescent Current | IB | 3.5 | 6.5 | mA | 13 | ||
| Quiescent Current Change | IB | 1 | mA | 21 Vdc ≤ Vin ≤ 33 Vdc | 13 | ||
| Quiescent Current Change | IB | 0.5 | mA | 5.0 mA ≤ IO ≤ 1.0 A | 13 | ||
| Ripple Rejection | RR | 53 | 57 | dB | 22 Vdc ≤ Vin ≤ 33 Vdc, f = 120 Hz | 13 | |
| Input Voltage (5.0 - 18 V devices) | VI | 35 | Vdc | 5.0 − 18 V devices | 1 | ||
| Storage Junction Temperature Range | Tstg | -65 | 150 | °C | 1 | ||
| Operating Junction Temperature | TJ | 150 | °C | 1 | |||
| Operating Junction Temperature Range (ordering information for MC7818CD2TR4G) | TJ | 0 | 125 | °C | MC7818CD2TR4G ordering information, TJ = 0°C to +125°C | 23 | |
| Dropout Voltage (IO = 1.0 A, TJ = 25°C) | VI − VO | 2 | Vdc | IO = 1.0 A, TJ = 25°C | 13 | ||
| Output Noise Voltage (TA = 25°C) | Vn | 10 | V/VO | 10 Hz ≤ f ≤ 100 kHz | 13 | ||
| Output Resistance | rO | 1.3 | mΩ | f = 1.0 kHz | 13 | ||
| Short Circuit Current Limit (TA = 25°C) | ISC | 0.2 | A | TA = 25°C, Vin = 35 Vdc | 13 | ||
| Peak Output Current (TJ = 25°C) | Imax | 2.2 | A | TJ = 25°C | 13 | ||
| Average Temperature Coefficient of Output Voltage | TCVO | -1.5 | mV/°C | 13 | |||
| Thermal Resistance, Junction-to-Case | RJC | 5 | °C/W | D2PAK (CASE 936) column of Maximum Ratings | 1 |
CAD (KiCad official)
- Symbol:
MC7818CD2TR4G - Footprint:
Package_TO_SOT_SMD:TO-263-2 - 3D model: D2PAK (KiCad packages3D, STEP)
- 3D model files:
mc7818cd2tr4g-etched.step/mc7818cd2tr4g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc7818cd2tr4g.step/mc7818cd2tr4g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (29 pp, sha256
0d716b89ee95cd63, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).