← Commit history
page.json+6−3@@ -32,7 +32,7 @@ "number": "1", "name": "Vin", "type": "power_in",- "description": "Unregulated positive input voltage. Must be at least ~2.0 V above Vout (dropout, Io=1.0 A) and typically \u226435 Vdc (absolute max, 24 V rating for the DPAK/D2PAK CASE 369C/936, 40 V for TO-220 CASE 221AB). A ~0.33 \u00b5F input capacitor is recommended if the regulator is not close to the supply filter."+ "description": "Unregulated positive input voltage. Must be at least ~2.0 V above Vout (dropout, Io=1.0 A) and typically ≤35 Vdc (absolute max, 24 V rating for the DPAK/D2PAK CASE 369C/936, 40 V for TO-220 CASE 221AB). A ~0.33 µF input capacitor is recommended if the regulator is not close to the supply filter." }, { "number": "2",@@ -44,7 +44,7 @@ "number": "3", "name": "Vout", "type": "power_out",- "description": "Regulated +12 Vdc output (\u00b14% for MC7812C; nominal 12.0 V, 11.5-12.5 V over line/load/temperature). Delivers up to 1.0 A output current with adequate heatsinking; typical peak (short-term) current 2.2 A, short-circuit current limit ~0.2 A at Vin=35 V. An output capacitor is not required for stability but \u22650.1 \u00b5F improves transient response."+ "description": "Regulated +12 Vdc output (±4% for MC7812C; nominal 12.0 V, 11.5-12.5 V over line/load/temperature). Delivers up to 1.0 A output current with adequate heatsinking; typical peak (short-term) current 2.2 A, short-circuit current limit ~0.2 A at Vin=35 V. An output capacitor is not required for stability but ≥0.1 µF improves transient response." } ], "provenance": {@@ -130,5 +130,8 @@ "docs/mc7812cdtrkg-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }