MC7812BDTRKG

{
 "schema": "adom.pads/1",
 "slug": "mc7812bdtrkg",
 "footprint": "TO-252-2",
 "generated_from": {
  "footprint": "TO-252-2@sha256:18c28e5e147d5e9b",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -5.04,
   -2.28
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TO-252-2@sha256:18c28e5e147d5e9b"
 },
 "pad_count": 3,
 "symbol_pins": [
  "1",
  "2",
  "3"
 ],
 "paste_apertures": 4,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -5.04,
    -2.28
   ],
   "rot": 0.0,
   "size": [
    2.2,
    1.2
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "Input",
   "type": "power_in",
   "description": "Unregulated positive input supply. Must remain approximately 2.0 V above the +12 V output (dropout ~2.0 V typ.) and not exceed 35 Vdc absolute max. A 0.33 uF ceramic input capacitor is required if the device is located an appreciable distance from the supply filter.",
   "is_pin1": true,
   "source": {
    "geometry": "TO-252-2.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.26,
    0.0
   ],
   "rot": 0.0,
   "size": [
    6.4,
    5.8
   ],
   "layers": [
    "F.Cu",
    "F.Mask"
   ],
   "thermal": false,
   "pin": "2",
   "name": "Ground",
   "type": "power_in",
   "description": "Device common / ground reference. A common ground is required between the input and output sides of the regulator. On the DPAK-3 (DT SUFFIX, CASE 369C) package the heatsink tab (drawn as terminal 4) is internally connected to pin 2 (Ground).",
   "is_pin1": false,
   "source": {
    "geometry": "TO-252-2.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -5.04,
    2.28
   ],
   "rot": 0.0,
   "size": [
    2.2,
    1.2
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "Output",
   "type": "power_out",
   "description": "Regulated +12 V positive output, capable of delivering >1.0 A with internal short-circuit and thermal protection. An output capacitor (Co) is not strictly required for stability but improves transient response; values <0.1 uF may cause instability.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-252-2.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}