main
Ray
mc7812bd2tr4g: laser-etched CAD + chip hero (factory 2.0.0 backfill)
fdfe4e3
MC7812BD2TR4G
onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-263-2
MC7812BD2TR4G from onsemi, in a TO-263-2. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Unregulated positive input voltage. For MC7812 the input must be at least ~2.0 V above VOUT (i.e. ≥14 V) and no greater than the 35 Vdc absolute maximum. A 0.33 µF input bypass capacitor (Cin) is required if the regulator is located an appreciable distance from the power-supply filter. |
| 2 | GND | power_in | Common ground reference for both input and output. Also internally connected to the exposed heatsink tab (terminal 4 in the case outline drawing) for thermal dissipation to the PCB copper pour. |
| 3 | Vout | power_out | Regulated +12 V output, 1.0 A continuous (2.2 A peak). Output capacitor CO is not required for stability but improves transient response; values below 0.1 µF can cause instability. Typical output noise 10 µV/V0 (10 Hz-100 kHz). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TO-263-2 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
Same part, different packaging or reel option.
MC7812BD2TR4GMC7812BD2TR4GD2TGMC7812BD2TR4GTMC7812BD2TR4GTGMC7812BD2TR4GDTMC7812BD2TR4GDTGMC7812BD2TR4GDTRKMC7812BD2TR4GDTRKG
CAD (KiCad official)
- Symbol:
MC7812BD2TR4G - Footprint:
Package_TO_SOT_SMD:TO-263-2 - 3D model: TO-263-2 (KiCad packages3D, STEP)
- 3D model files:
mc7812bd2tr4g-etched.step/mc7812bd2tr4g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc7812bd2tr4g.step/mc7812bd2tr4g.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
mc7812bd2tr4g.step |
108 KB | You want the bare part, or you mark your own boards. |
mc7812bd2tr4g-etched.step |
2.1 MB | You want the part with MC7812BD2TR4G already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 550 faces against 79 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (28 pp, sha256
a0831a3a6a3010ac, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MC7812BD2TR4G
**onsemi** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-263-2
MC7812BD2TR4G from onsemi, in a TO-263-2. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vin | power_in | Unregulated positive input voltage. For MC7812 the input must be at least ~2.0 V above VOUT (i.e. ≥14 V) and no greater than the 35 Vdc absolute maximum. A 0.33 µF input bypass capacitor (Cin) is required if the regulator is located an appreciable distance from the power-supply filter. |
| 2 | GND | power_in | Common ground reference for both input and output. Also internally connected to the exposed heatsink tab (terminal 4 in the case outline drawing) for thermal dissipation to the PCB copper pour. |
| 3 | Vout | power_out | Regulated +12 V output, 1.0 A continuous (2.2 A peak). Output capacitor CO is not required for stability but improves transient response; values below 0.1 µF can cause instability. Typical output noise 10 µV/V0 (10 Hz-100 kHz). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TO-263-2 |
| Category | PMIC |
| Pins | 3 |
## Ordering variants
Same part, different packaging or reel option.
- `MC7812BD2TR4G`
- `MC7812BD2TR4GD2TG`
- `MC7812BD2TR4GT`
- `MC7812BD2TR4GTG`
- `MC7812BD2TR4GDT`
- `MC7812BD2TR4GDTG`
- `MC7812BD2TR4GDTRK`
- `MC7812BD2TR4GDTRKG`
## CAD (KiCad official)
- Symbol: `MC7812BD2TR4G`
- Footprint: `Package_TO_SOT_SMD:TO-263-2`
- 3D model: TO-263-2 (KiCad packages3D, STEP)
- 3D model files: `mc7812bd2tr4g-etched.step` / `mc7812bd2tr4g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mc7812bd2tr4g.step` / `mc7812bd2tr4g.glb` are the bare package body.
## 3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
| [`mc7812bd2tr4g.step`](mc7812bd2tr4g.step) | 108 KB | You want the bare part, or you mark your own boards. |
| [`mc7812bd2tr4g-etched.step`](mc7812bd2tr4g-etched.step) | 2.1 MB | You want the part with `MC7812BD2TR4G` already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a
texture or a decal: 550 faces against 79 in the bare model. It
survives export, section views, and rendering in any CAD tool, and it drops straight
into KiCad or Fusion with no extra setup.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc7812bd2tr4-d.pdf) (28 pp, sha256 `a0831a3a6a3010ac`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mc7812bd2tr4g-datasheet.pdf)