MC7805BDTRKG

{
 "schema": "adom.pads/1",
 "slug": "mc7805bdtrkg",
 "footprint": "TO-252-2",
 "generated_from": {
  "footprint": "TO-252-2@sha256:18c28e5e147d5e9b",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -5.04,
   -2.28
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TO-252-2@sha256:18c28e5e147d5e9b"
 },
 "pad_count": 3,
 "symbol_pins": [
  "1",
  "2",
  "3"
 ],
 "paste_apertures": 4,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -5.04,
    -2.28
   ],
   "rot": 0.0,
   "size": [
    2.2,
    1.2
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "VI",
   "type": "power_in",
   "description": "Unregulated positive input supply. Must remain at least ~2.0 V above the 5.0 V output (dropout typ 2.0 V at Io = 1.0 A). Absolute-maximum input voltage 35 Vdc (40 Vdc for the 24 V variant). A 0.33 uF ceramic input cap (Cin) is recommended if the regulator sits any appreciable distance from the bulk supply filter.",
   "is_pin1": true,
   "source": {
    "geometry": "TO-252-2.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.26,
    0.0
   ],
   "rot": 0.0,
   "size": [
    6.4,
    5.8
   ],
   "layers": [
    "F.Cu",
    "F.Mask"
   ],
   "thermal": false,
   "pin": "2",
   "name": "GND",
   "type": "power_in",
   "description": "Common ground reference shared by input and output. On DPAK-3 / D2PAK-3 packages the exposed heatsink tab is internally connected to this pin, so the mounting pad is at ground potential and can be soldered directly to the PCB ground plane for heat dissipation.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-252-2.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -5.04,
    2.28
   ],
   "rot": 0.0,
   "size": [
    2.2,
    1.2
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "VO",
   "type": "power_out",
   "description": "Regulated +5.0 V output, 4.8-5.2 V over Tj = 25 °C for the 'B' grade, capable of >1.0 A with adequate heatsinking (peak Imax typ 2.2 A, Isc typ 0.2 A at Vin = 35 V). An output capacitor (Co, typically >=0.1 uF) is not required for stability but improves transient response; smaller values may cause instability.",
   "is_pin1": false,
   "source": {
    "geometry": "TO-252-2.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}