main
Ray
Publish 0.1.0
abbdedd
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164
{
"slug": "mc7805bdtg",
"version": "0.1.0",
"type": "component",
"description": "ON Semiconductor Global Sourcing Parts, DPAK. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"global sourcing parts",
"mc7805bdtg",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"mc7805bdtg.kicad_sym",
"mc7805bdtg.kicad_mod",
"mc7805bdtg.glb",
"mc7805bdtg.step",
"mc7805bdtg.lbr",
"docs/hero.png",
"docs/mc7805bdtg-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"mc7805bdtg-hero.glb",
"mc7805bdtg-hero.overlay.json",
"mc7805bdtg-etched.glb"
],
"component": {
"mpn": "MC7805BDTG",
"manufacturer": "ON Semiconductor",
"package": "DPAK",
"pin_count": 3,
"category": "Global Sourcing Parts",
"subcategory": "Global Sourcing Parts",
"datasheet": "https://www.onsemi.com/pdf/datasheet/mc7805bdt-d.pdf",
"parts": {
"symbol": "mc7805bdtg.kicad_sym",
"footprint": "mc7805bdtg.kicad_mod",
"model_3d": "mc7805bdtg-hero.glb",
"model_3d_plain": "mc7805bdtg-etched.glb",
"model_3d_step": "mc7805bdtg-etched.step",
"model_3d_step_plain": "mc7805bdtg.step",
"lbr": "mc7805bdtg.lbr"
},
"distributor_links": {
"lcsc": "C83632",
"digikey": "MC7805BDTGOS-ND",
"mouser": "863-MC7805BDTG"
},
"distributor_check": {
"checked_at": "2026-11-12T02:55:51Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "MC7805BDTGOS-ND",
"status": "found"
},
"mouser": {
"pn": "863-MC7805BDTG",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "Input",
"type": "power_in",
"description": "Unregulated input to the regulator, with a maximum input voltage of 35 Vdc for the 5.0 V device and an input that must remain typically 2.0 V above the output even at the low point of the input ripple."
},
{
"number": "2",
"name": "Ground",
"type": "power_in",
"description": "Common ground reference for the input and output voltages, and the heatsink surface is connected to this pin."
},
{
"number": "3",
"name": "Output",
"type": "power_out",
"description": "Regulated 5.0 V output, where an output capacitor of at least 0.1 µF is needed for stability since values below 0.1 µF could cause instability."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin assignments (1 Input, 2 Ground, 3 Output) are given for the three-terminal family in the figure-; The datasheet says the heatsink surface (terminal 4 in the D2PAK drawing) is connected to pin 2. The; The maximum input voltage of 35 Vdc is taken from the Maximum Ratings table, where the column layout"
],
"pages_sent": 29,
"cost_usd": 0.1488,
"at": "2026-11-12T02:55:43"
},
"datasheet": {
"url": "https://www.onsemi.com/pdf/datasheet/mc7805bdt-d.pdf",
"pages": 29,
"sha256": "b04c526d55e5a343",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 3,
"described": 3,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "mc7805bdtg.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9.9,
6.5,
2.32
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3eb4c99603a4fe837c2fe9308bc174769ded87a785a0df48d2dc441432ee8b4c",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "mc7805bdtg-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
9.9,
6.5,
2.32
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ac1cce5218abbcd18f3034c2654a92747d031f9205c3c6397134ddec6e2bf00e",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}