main
Ray
Publish 0.1.0
7ef288d
MC74LCX125DTG
onsemi · Buffers / Drivers · TSSOP-14
MC74LCX125DTG from onsemi, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE0 | input | Active-HIGH output enable for buffer 0; when HIGH it places O0 in the high-impedance state, and inputs must not float. |
| 2 | D0 | input | Data input of buffer 0, a 5.0 V tolerant input that can be driven up to 5.5 V with VCC between 2.3 and 3.6 V. |
| 3 | O0 | tri_state | 3-state non-inverting output of buffer 0, rated at 24 mA balanced sink and source capability. |
| 4 | OE1 | input | Active-HIGH output enable for buffer 1; when HIGH it places O1 in the high-impedance state, and inputs must not float. |
| 5 | D1 | input | Data input of buffer 1, a 5.0 V tolerant input that can be driven up to 5.5 V with VCC between 2.3 and 3.6 V. |
| 6 | O1 | tri_state | 3-state non-inverting output of buffer 1, rated at 24 mA balanced sink and source capability. |
| 7 | GND | power_in | Ground reference pin for the device. |
| 8 | O2 | tri_state | 3-state non-inverting output of buffer 2, rated at 24 mA balanced sink and source capability. |
| 9 | D2 | input | Data input of buffer 2, a 5.0 V tolerant input that can be driven up to 5.5 V with VCC between 2.3 and 3.6 V. |
| 10 | OE2 | input | Active-HIGH output enable for buffer 2; when HIGH it places O2 in the high-impedance state, and inputs must not float. |
| 11 | O3 | tri_state | 3-state non-inverting output of buffer 3, rated at 24 mA balanced sink and source capability. |
| 12 | D3 | input | Data input of buffer 3, a 5.0 V tolerant input that can be driven up to 5.5 V with VCC between 2.3 and 3.6 V. |
| 13 | OE3 | input | Active-HIGH output enable for buffer 3; when HIGH it places O3 in the high-impedance state, and inputs must not float. |
| 14 | VCC | power_in | Positive supply pin; the datasheet specifies operation from 2.3 to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSSOP-14 |
| Category | Logic ICs |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Supply Voltage | VCC | -0.5 | 7 | V | 2 | ||
| DC Input Voltage | VI | -0.5 | 7 | V | 2 | ||
| DC Output Voltage | VO | -0.5 | 7 | V | Output in 3-State | 2 | |
| DC Input Diode Current | IIK | -50 | mA | VI < GND | 2 | ||
| DC Output Diode Current | IOK | -50 | mA | VO < GND | 2 | ||
| DC Output Diode Current | IOK | 50 | mA | VO > VCC | 2 | ||
| DC Output Source/Sink Current | IO | 50 | mA | 2 | |||
| DC Supply Current | ICC | 100 | mA | Per Supply Pin | 2 | ||
| DC Ground Current | IGND | 100 | mA | Per Ground Pin | 2 | ||
| Storage Temperature Range | TSTG | -65 | 150 | C | 2 | ||
| Supply Voltage Operating | VCC | 2 | 3.6 | V | Operating | 3 | |
| Supply Voltage Data Retention Only | VCC | 1.5 | 3.6 | V | Data Retention Only | 3 | |
| Input Voltage | VI | 0 | 5.5 | V | 3 | ||
| Output Voltage 3-State | VO | 0 | 5.5 | V | 3-State | 3 | |
| HIGH Level Output Current | IOH | -24 | mA | VCC = 3.0 V - 3.6 V | 3 | ||
| HIGH Level Output Current | IOH | -12 | mA | VCC = 2.7 V - 3.0 V | 3 | ||
| HIGH Level Output Current | IOH | -8 | mA | VCC = 2.3 V - 2.7 V | 3 | ||
| LOW Level Output Current | IOL | 24 | mA | VCC = 3.0 V - 3.6 V | 3 | ||
| LOW Level Output Current | IOL | 12 | mA | VCC = 2.7 V - 3.0 V | 3 | ||
| LOW Level Output Current | IOL | 8 | mA | VCC = 2.3 V - 2.7 V | 3 | ||
| Operating Free-Air Temperature | TA | -40 | 85 | C | 3 | ||
| Input Transition Rise or Fall Rate | t/V | 0 | 10 | ns/V | VIN from 0.8 V to 2.0 V, VCC = 3.0 V | 3 | |
| HIGH Level Input Voltage | VIH | 1.7 | V | 2.3 V to 2.7 V | 3 | ||
| HIGH Level Input Voltage | VIH | 2 | V | 2.7 V to 3.6 V | 3 | ||
| LOW Level Input Voltage | VIL | 0.7 | V | 2.3 V to 2.7 V | 3 | ||
| LOW Level Input Voltage | VIL | 0.8 | V | 2.7 V to 3.6 V | 3 | ||
| HIGH Level Output Voltage | VOH | 1.8 | V | VCC = 2.3 V; IOH = -8 mA | 3 | ||
| HIGH Level Output Voltage | VOH | 2.2 | V | VCC = 2.7 V; IOH = -12 mA | 3 | ||
| HIGH Level Output Voltage | VOH | 2.4 | V | VCC = 3.0 V; IOH = -18 mA | 3 | ||
| LOW Level Output Voltage | VOL | 0.2 | V | 2.3 V to 3.6 V; IOL = 100 µA | 3 | ||
| LOW Level Output Voltage | VOL | 0.6 | V | VCC = 2.3 V; IOL = 8 mA | 3 | ||
| LOW Level Output Voltage | VOL | 0.4 | V | VCC = 2.7 V; IOL = 12 mA | 3 | ||
| LOW Level Output Voltage | VOL | 0.55 | V | VCC = 3.0 V; IOL = 24 mA | 3 | ||
| 3-State Output Current | IOZ | 5 | µA | VCC = 3.6 V, VIN = VIH or VIL, VOUT = 0 to 5.5 V | 3 | ||
| Power Off Leakage Current | IOFF | 10 | µA | VCC = 0, VIN = 5.5 V or VOUT = 5.5 V | 3 | ||
| Input Leakage Current | IIN | 5 | µA | VCC = 3.6 V, VIN = 5.5 V or GND | 3 | ||
| Quiescent Supply Current | ICC | 10 | µA | VCC = 3.6 V, VIN = 5.5 V or GND | 3 | ||
| Increase in ICC per Input | ICC | 500 | µA | 2.3 V to 3.6 V; VIH = VCC - 0.6 V | 3 | ||
| Propagation Delay Time Input to Output | tPLH | 1.5 | 6 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF | 4 | |
| Propagation Delay Time Input to Output | tPLH | 1.5 | 6.5 | ns | VCC = 2.7 V; CL = 50 pF | 4 | |
| Propagation Delay Time Input to Output | tPLH | 1.5 | 7.2 | ns | VCC = 2.5 V ±0.2 V; CL = 30 pF | 4 | |
| Output Enable Time to High and Low Level | tPZH | 1.5 | 7 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF | 4 | |
| Output Enable Time to High and Low Level | tPZH | 1.5 | 8 | ns | VCC = 2.7 V; CL = 50 pF | 4 | |
| Output Enable Time to High and Low Level | tPZH | 1.5 | 9.1 | ns | VCC = 2.5 V ±0.2 V; CL = 30 pF | 4 | |
| Output Disable Time From High and Low Level | tPHZ | 1.5 | 6 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF | 4 | |
| Output Disable Time From High and Low Level | tPHZ | 1.5 | 7 | ns | VCC = 2.7 V; CL = 50 pF | 4 | |
| Output Disable Time From High and Low Level | tPHZ | 1.5 | 7.2 | ns | VCC = 2.5 V ±0.2 V; CL = 30 pF | 4 | |
| Output-to-Output Skew | tOSHL | 1 | ns | 4 |
CAD (KiCad official)
- Symbol:
MC74LCX125DTG - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
mc74lcx125dtg-etched.step/mc74lcx125dtg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc74lcx125dtg.step/mc74lcx125dtg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (9 pp, sha256
ae96a3393dcd8a17, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MC74LCX125DTG
**onsemi** · Buffers / Drivers · TSSOP-14
MC74LCX125DTG from onsemi, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE0 | input | Active-HIGH output enable for buffer 0; when HIGH it places O0 in the high-impedance state, and inputs must not float. |
| 2 | D0 | input | Data input of buffer 0, a 5.0 V tolerant input that can be driven up to 5.5 V with VCC between 2.3 and 3.6 V. |
| 3 | O0 | tri_state | 3-state non-inverting output of buffer 0, rated at 24 mA balanced sink and source capability. |
| 4 | OE1 | input | Active-HIGH output enable for buffer 1; when HIGH it places O1 in the high-impedance state, and inputs must not float. |
| 5 | D1 | input | Data input of buffer 1, a 5.0 V tolerant input that can be driven up to 5.5 V with VCC between 2.3 and 3.6 V. |
| 6 | O1 | tri_state | 3-state non-inverting output of buffer 1, rated at 24 mA balanced sink and source capability. |
| 7 | GND | power_in | Ground reference pin for the device. |
| 8 | O2 | tri_state | 3-state non-inverting output of buffer 2, rated at 24 mA balanced sink and source capability. |
| 9 | D2 | input | Data input of buffer 2, a 5.0 V tolerant input that can be driven up to 5.5 V with VCC between 2.3 and 3.6 V. |
| 10 | OE2 | input | Active-HIGH output enable for buffer 2; when HIGH it places O2 in the high-impedance state, and inputs must not float. |
| 11 | O3 | tri_state | 3-state non-inverting output of buffer 3, rated at 24 mA balanced sink and source capability. |
| 12 | D3 | input | Data input of buffer 3, a 5.0 V tolerant input that can be driven up to 5.5 V with VCC between 2.3 and 3.6 V. |
| 13 | OE3 | input | Active-HIGH output enable for buffer 3; when HIGH it places O3 in the high-impedance state, and inputs must not float. |
| 14 | VCC | power_in | Positive supply pin; the datasheet specifies operation from 2.3 to 3.6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSSOP-14 |
| Category | Logic ICs |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Supply Voltage | VCC | -0.5 | | 7 | V | | 2 |
| DC Input Voltage | VI | -0.5 | | 7 | V | | 2 |
| DC Output Voltage | VO | -0.5 | | 7 | V | Output in 3-State | 2 |
| DC Input Diode Current | IIK | -50 | | | mA | VI < GND | 2 |
| DC Output Diode Current | IOK | -50 | | | mA | VO < GND | 2 |
| DC Output Diode Current | IOK | | | 50 | mA | VO > VCC | 2 |
| DC Output Source/Sink Current | IO | | | 50 | mA | | 2 |
| DC Supply Current | ICC | | | 100 | mA | Per Supply Pin | 2 |
| DC Ground Current | IGND | | | 100 | mA | Per Ground Pin | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | C | | 2 |
| Supply Voltage Operating | VCC | 2 | | 3.6 | V | Operating | 3 |
| Supply Voltage Data Retention Only | VCC | 1.5 | | 3.6 | V | Data Retention Only | 3 |
| Input Voltage | VI | 0 | | 5.5 | V | | 3 |
| Output Voltage 3-State | VO | 0 | | 5.5 | V | 3-State | 3 |
| HIGH Level Output Current | IOH | -24 | | | mA | VCC = 3.0 V - 3.6 V | 3 |
| HIGH Level Output Current | IOH | -12 | | | mA | VCC = 2.7 V - 3.0 V | 3 |
| HIGH Level Output Current | IOH | -8 | | | mA | VCC = 2.3 V - 2.7 V | 3 |
| LOW Level Output Current | IOL | | | 24 | mA | VCC = 3.0 V - 3.6 V | 3 |
| LOW Level Output Current | IOL | | | 12 | mA | VCC = 2.7 V - 3.0 V | 3 |
| LOW Level Output Current | IOL | | | 8 | mA | VCC = 2.3 V - 2.7 V | 3 |
| Operating Free-Air Temperature | TA | -40 | | 85 | C | | 3 |
| Input Transition Rise or Fall Rate | t/V | 0 | | 10 | ns/V | VIN from 0.8 V to 2.0 V, VCC = 3.0 V | 3 |
| HIGH Level Input Voltage | VIH | 1.7 | | | V | 2.3 V to 2.7 V | 3 |
| HIGH Level Input Voltage | VIH | 2 | | | V | 2.7 V to 3.6 V | 3 |
| LOW Level Input Voltage | VIL | | | 0.7 | V | 2.3 V to 2.7 V | 3 |
| LOW Level Input Voltage | VIL | | | 0.8 | V | 2.7 V to 3.6 V | 3 |
| HIGH Level Output Voltage | VOH | 1.8 | | | V | VCC = 2.3 V; IOH = -8 mA | 3 |
| HIGH Level Output Voltage | VOH | 2.2 | | | V | VCC = 2.7 V; IOH = -12 mA | 3 |
| HIGH Level Output Voltage | VOH | 2.4 | | | V | VCC = 3.0 V; IOH = -18 mA | 3 |
| LOW Level Output Voltage | VOL | | | 0.2 | V | 2.3 V to 3.6 V; IOL = 100 µA | 3 |
| LOW Level Output Voltage | VOL | | | 0.6 | V | VCC = 2.3 V; IOL = 8 mA | 3 |
| LOW Level Output Voltage | VOL | | | 0.4 | V | VCC = 2.7 V; IOL = 12 mA | 3 |
| LOW Level Output Voltage | VOL | | | 0.55 | V | VCC = 3.0 V; IOL = 24 mA | 3 |
| 3-State Output Current | IOZ | | | 5 | µA | VCC = 3.6 V, VIN = VIH or VIL, VOUT = 0 to 5.5 V | 3 |
| Power Off Leakage Current | IOFF | | | 10 | µA | VCC = 0, VIN = 5.5 V or VOUT = 5.5 V | 3 |
| Input Leakage Current | IIN | | | 5 | µA | VCC = 3.6 V, VIN = 5.5 V or GND | 3 |
| Quiescent Supply Current | ICC | | | 10 | µA | VCC = 3.6 V, VIN = 5.5 V or GND | 3 |
| Increase in ICC per Input | ICC | | | 500 | µA | 2.3 V to 3.6 V; VIH = VCC - 0.6 V | 3 |
| Propagation Delay Time Input to Output | tPLH | 1.5 | | 6 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF | 4 |
| Propagation Delay Time Input to Output | tPLH | 1.5 | | 6.5 | ns | VCC = 2.7 V; CL = 50 pF | 4 |
| Propagation Delay Time Input to Output | tPLH | 1.5 | | 7.2 | ns | VCC = 2.5 V ±0.2 V; CL = 30 pF | 4 |
| Output Enable Time to High and Low Level | tPZH | 1.5 | | 7 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF | 4 |
| Output Enable Time to High and Low Level | tPZH | 1.5 | | 8 | ns | VCC = 2.7 V; CL = 50 pF | 4 |
| Output Enable Time to High and Low Level | tPZH | 1.5 | | 9.1 | ns | VCC = 2.5 V ±0.2 V; CL = 30 pF | 4 |
| Output Disable Time From High and Low Level | tPHZ | 1.5 | | 6 | ns | VCC = 3.3 V ±0.3 V; CL = 50 pF | 4 |
| Output Disable Time From High and Low Level | tPHZ | 1.5 | | 7 | ns | VCC = 2.7 V; CL = 50 pF | 4 |
| Output Disable Time From High and Low Level | tPHZ | 1.5 | | 7.2 | ns | VCC = 2.5 V ±0.2 V; CL = 30 pF | 4 |
| Output-to-Output Skew | tOSHL | | | 1 | ns | | 4 |
## CAD (KiCad official)
- Symbol: `MC74LCX125DTG`
- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`
- 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files: `mc74lcx125dtg-etched.step` / `mc74lcx125dtg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mc74lcx125dtg.step` / `mc74lcx125dtg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc74lcx125dt-d.pdf) (9 pp, sha256 `ae96a3393dcd8a17`, retrieved 2026-11-21)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mc74lcx125dtg-datasheet.pdf)