main
Ray
mc74hct366adtr2g: laser-etched CAD + chip hero (factory 2.0.0 backfill)
660fa1e
MC74HCT366ADTR2G
onsemi · Buffers, Drivers, Receivers, Transceivers · TSSOP-16
MC74HCT366ADTR2G from onsemi, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE1 | input | Output Enable 1 (active low). When either OE1 or OE2 is HIGH, all six Y outputs are placed into the high-impedance state. Both enables must be LOW for outputs to be active. LSTTL-compatible input. |
| 2 | A0 | input | Buffer 0 data input. Inverted and driven to Y0 when enables are active. LSTTL-compatible input; max input leakage 1.0 µA. Unused inputs must be tied to VCC or GND. |
| 3 | Y0 | tri_state | Buffer 0 3-state inverting output (Y0 = /A0 when enabled; Hi-Z when either OE is HIGH). Drives up to 15 LSTTL loads; typical output current spec 7.8 mA at VCC=6.0 V. |
| 4 | A1 | input | Buffer 1 data input. Inverted and driven to Y1 when enables are active. LSTTL-compatible input. |
| 5 | Y1 | tri_state | Buffer 1 3-state inverting output (Y1 = /A1 when enabled; Hi-Z when either OE is HIGH). |
| 6 | A2 | input | Buffer 2 data input. Inverted and driven to Y2 when enables are active. LSTTL-compatible input. |
| 7 | Y2 | tri_state | Buffer 2 3-state inverting output (Y2 = /A2 when enabled; Hi-Z when either OE is HIGH). |
| 8 | GND | power_in | Ground reference (0 V). All input/output voltages referenced to GND. Max DC supply current through VCC/GND is ±50 mA. |
| 9 | Y3 | tri_state | Buffer 3 3-state inverting output (Y3 = /A3 when enabled; Hi-Z when either OE is HIGH). |
| 10 | A3 | input | Buffer 3 data input. Inverted and driven to Y3 when enables are active. LSTTL-compatible input. |
| 11 | Y4 | tri_state | Buffer 4 3-state inverting output (Y4 = /A4 when enabled; Hi-Z when either OE is HIGH). |
| 12 | A4 | input | Buffer 4 data input. Inverted and driven to Y4 when enables are active. LSTTL-compatible input. |
| 13 | Y5 | tri_state | Buffer 5 3-state inverting output (Y5 = /A5 when enabled; Hi-Z when either OE is HIGH). |
| 14 | A5 | input | Buffer 5 data input. Inverted and driven to Y5 when enables are active. LSTTL-compatible input. |
| 15 | OE2 | input | Output Enable 2 (active low). When either OE1 or OE2 is HIGH, all six Y outputs are placed into the high-impedance state. Both enables must be LOW for outputs to be active. |
| 16 | VCC | power_in | Positive supply voltage. Recommended operating range 2.0 to 6.0 V (absolute max 7.0 V). Quiescent supply current 4 µA typical at 25 °C, 6.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSSOP-16 |
| Category | Logic |
| Pins | 16 |
Ordering variants
Same part, different packaging or reel option.
MC74HCT366ADTR2GMC74HCT366ADTR2GNLVHCT366ADTRGMC74HCT366ADGMC74HCT366ADR2G
CAD (KiCad official)
- Symbol:
MC74HCT366ADTR2G - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
mc74hct366adtr2g-etched.step/mc74hct366adtr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc74hct366adtr2g.step/mc74hct366adtr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (None pp, sha256
e9aa870c39c8ba91, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MC74HCT366ADTR2G
**onsemi** · Buffers, Drivers, Receivers, Transceivers · TSSOP-16
MC74HCT366ADTR2G from onsemi, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE1 | input | Output Enable 1 (active low). When either OE1 or OE2 is HIGH, all six Y outputs are placed into the high-impedance state. Both enables must be LOW for outputs to be active. LSTTL-compatible input. |
| 2 | A0 | input | Buffer 0 data input. Inverted and driven to Y0 when enables are active. LSTTL-compatible input; max input leakage 1.0 µA. Unused inputs must be tied to VCC or GND. |
| 3 | Y0 | tri_state | Buffer 0 3-state inverting output (Y0 = /A0 when enabled; Hi-Z when either OE is HIGH). Drives up to 15 LSTTL loads; typical output current spec 7.8 mA at VCC=6.0 V. |
| 4 | A1 | input | Buffer 1 data input. Inverted and driven to Y1 when enables are active. LSTTL-compatible input. |
| 5 | Y1 | tri_state | Buffer 1 3-state inverting output (Y1 = /A1 when enabled; Hi-Z when either OE is HIGH). |
| 6 | A2 | input | Buffer 2 data input. Inverted and driven to Y2 when enables are active. LSTTL-compatible input. |
| 7 | Y2 | tri_state | Buffer 2 3-state inverting output (Y2 = /A2 when enabled; Hi-Z when either OE is HIGH). |
| 8 | GND | power_in | Ground reference (0 V). All input/output voltages referenced to GND. Max DC supply current through VCC/GND is ±50 mA. |
| 9 | Y3 | tri_state | Buffer 3 3-state inverting output (Y3 = /A3 when enabled; Hi-Z when either OE is HIGH). |
| 10 | A3 | input | Buffer 3 data input. Inverted and driven to Y3 when enables are active. LSTTL-compatible input. |
| 11 | Y4 | tri_state | Buffer 4 3-state inverting output (Y4 = /A4 when enabled; Hi-Z when either OE is HIGH). |
| 12 | A4 | input | Buffer 4 data input. Inverted and driven to Y4 when enables are active. LSTTL-compatible input. |
| 13 | Y5 | tri_state | Buffer 5 3-state inverting output (Y5 = /A5 when enabled; Hi-Z when either OE is HIGH). |
| 14 | A5 | input | Buffer 5 data input. Inverted and driven to Y5 when enables are active. LSTTL-compatible input. |
| 15 | OE2 | input | Output Enable 2 (active low). When either OE1 or OE2 is HIGH, all six Y outputs are placed into the high-impedance state. Both enables must be LOW for outputs to be active. |
| 16 | VCC | power_in | Positive supply voltage. Recommended operating range 2.0 to 6.0 V (absolute max 7.0 V). Quiescent supply current 4 µA typical at 25 °C, 6.0 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSSOP-16 |
| Category | Logic |
| Pins | 16 |
## Ordering variants
Same part, different packaging or reel option.
- `MC74HCT366ADTR2G`
- `MC74HCT366ADTR2GNLVHCT366ADTRG`
- `MC74HCT366ADG`
- `MC74HCT366ADR2G`
## CAD (KiCad official)
- Symbol: `MC74HCT366ADTR2G`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `mc74hct366adtr2g-etched.step` / `mc74hct366adtr2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mc74hct366adtr2g.step` / `mc74hct366adtr2g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588929215412776960) (None pp, sha256 `e9aa870c39c8ba91`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mc74hct366adtr2g-datasheet.pdf)