main
Ray
Publish 0.1.0
03f6bd1
MC74HC161ADG
onsemi · Counters / Dividers · SOIC-16
MC74HC161ADG from onsemi, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | input | Low level resets the internal flip-flops and forces Q0 through Q3 low; on the HC161A this reset is asynchronous. |
| 2 | CLOCK | input | Internal flip-flops toggle and the output count advances on the rising edge of the Clock input. |
| 3 | P0 | input | Preset data input P0, the least-significant bit, loaded synchronously when Load is low. |
| 4 | P1 | input | Preset data input P1, loaded synchronously into the flip-flops on the rising clock edge when Load is low. |
| 5 | P2 | input | Preset data input P2, loaded synchronously into the flip-flops on the rising clock edge when Load is low. |
| 6 | P3 | input | Preset data input P3, the most-significant bit, loaded synchronously when Load is low. |
| 7 | ENABLE P | input | Count-enable control; the device counts only when Enable P, Enable T and Load are all high. |
| 8 | GND | power_in | Ground reference for the device (pin 8 = GND); all voltages are referenced to GND. |
| 9 | LOAD | input | A low level on Load, sampled on the rising clock edge, loads P0 to P3 into the outputs and disables counting. |
| 10 | ENABLE T | input | Count-enable and ripple-carry control; must be high together with Enable P and Load to count. |
| 11 | Q3 | output | Counter output Q3, the most-significant bit. |
| 12 | Q2 | output | Counter output Q2 of the 4-bit binary count. |
| 13 | Q1 | output | Counter output Q1 of the 4-bit binary count. |
| 14 | Q0 | output | Counter output Q0, the least-significant bit. |
| 15 | RIPPLE CARRY OUT | output | Goes high only when the counter is in its maximum state 1111 with Enable T high, providing a carry for cascaded counters. |
| 16 | VCC | power_in | Positive supply (pin 16 = VCC); recommended operating range 2.0 V to 6.0 V referenced to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-16 |
| Category | Logic ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Supply Voltage | VCC | -0.5 | 7 | V | Maximum Ratings | 3 | |
| DC Input Voltage | VI | -0.5 | V | Maximum; upper limit VCC+0.5 V as printed | 3 | ||
| DC Output Voltage | VO | -0.5 | V | Maximum; upper limit VCC+0.5 V as printed (Note 1) | 3 | ||
| DC Input Diode Current | IIK | 20 | mA | 3 | |||
| DC Output Diode Current | IOK | 25 | mA | 3 | |||
| DC Output Sink Current | IO | 25 | mA | 3 | |||
| DC Supply Current per Supply Pin | ICC | 50 | mA | 3 | |||
| DC Ground Current per Ground Pin | IGND | 50 | mA | 3 | |||
| Storage Temperature Range | TSTG | -65 | 150 | C | 3 | ||
| Lead Temperature | TL | 260 | C | 1 mm from case for 10 seconds | 3 | ||
| Junction Temperature Under Bias | TJ | 150 | C | 3 | |||
| Power Dissipation in Still Air at 85C | PD | 500 | mW | SOIC package at 85C | 3 | ||
| ESD Withstand Voltage, Human Body Model | VESD | 2000 | V | Human Body Model (Note 2) | 3 | ||
| ESD Withstand Voltage, Machine Model | VESD | 200 | V | Machine Model (Note 3) | 3 | ||
| Thermal Resistance, Junction-to-Ambient | θJA | 112 | C/W | SOIC package | 3 | ||
| DC Supply Voltage | VCC | 2 | 6 | V | Referenced to GND | 3 | |
| DC Input Voltage, Output Voltage | Vin, Vout | 0 | V | Referenced to GND; maximum VCC as printed | 3 | ||
| Operating Temperature, All Package Types | TA | -55 | 125 | C | 3 | ||
| Input Rise and Fall Time | tr, tf | 0 | 1000 | ns | VCC=2.0 V (Figure 4) | 3 | |
| Input Rise and Fall Time | tr, tf | 0 | 600 | ns | VCC=3.0 V (Figure 4) | 3 | |
| Input Rise and Fall Time | tr, tf | 0 | 500 | ns | VCC=4.5 V (Figure 4) | 3 | |
| Input Rise and Fall Time | tr, tf | 0 | 400 | ns | VCC=6.0 V (Figure 4) | 3 | |
| Minimum High-Level Input Voltage | VIH | 1.5 | V | VCC=2.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 | ||
| Minimum High-Level Input Voltage | VIH | 2.1 | V | VCC=3.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 | ||
| Minimum High-Level Input Voltage | VIH | 3.15 | V | VCC=4.5 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 | ||
| Minimum High-Level Input Voltage | VIH | 4.2 | V | VCC=6.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 | ||
| Maximum Low-Level Input Voltage | VIL | 0.5 | V | VCC=2.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 | ||
| Maximum Low-Level Input Voltage | VIL | 0.9 | V | VCC=3.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 | ||
| Maximum Low-Level Input Voltage | VIL | 1.35 | V | VCC=4.5 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 | ||
| Maximum Low-Level Input Voltage | VIL | 1.8 | V | VCC=6.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 | ||
| Minimum High-Level Output Voltage | VOH | 1.9 | V | VCC=2.0 V; Vin=VIH or VIL; /Iout/<=20 uA; -55 to 25 C | 4 | ||
| Minimum High-Level Output Voltage | VOH | 4.4 | V | VCC=4.5 V; Vin=VIH or VIL; /Iout/<=20 uA; -55 to 25 C | 4 | ||
| Minimum High-Level Output Voltage | VOH | 5.9 | V | VCC=6.0 V; Vin=VIH or VIL; /Iout/<=20 uA; -55 to 25 C | 4 | ||
| Minimum High-Level Output Voltage | VOH | 2.48 | V | VCC=3.0 V; Vin=VIH or VIL; /Iout/<=3.6 mA; -55 to 25 C | 4 | ||
| Minimum High-Level Output Voltage | VOH | 3.98 | V | VCC=4.5 V; Vin=VIH or VIL; /Iout/<=4.0 mA; -55 to 25 C | 4 | ||
| Minimum High-Level Output Voltage | VOH | 5.48 | V | VCC=6.0 V; Vin=VIH or VIL; /Iout/<=5.2 mA; -55 to 25 C | 4 | ||
| Maximum Low-Level Output Voltage | VOL | 0.1 | V | VCC=2.0 V; Vin=VIH or VIL; /Iout/<=20 uA; -55 to 25 C | 4 | ||
| Maximum Low-Level Output Voltage | VOL | 0.26 | V | VCC=3.0 V; Vin=VIH or VIL; /Iout/<=3.6 mA; -55 to 25 C | 4 | ||
| Maximum Input Leakage Current | Iin | -0.1 | 0.1 | uA | Vin=VCC or GND; VCC=6.0 V; -55 to 25 C | 4 | |
| Maximum Quiescent Supply Current | ICC | 4 | uA | Vin=VCC or GND; Iout=0 uA; VCC=6.0 V; -55 to 25 C | 4 | ||
| Maximum Clock Frequency (50% Duty Cycle) | fmax | 6 | MHz | VCC=2.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 | ||
| Maximum Clock Frequency (50% Duty Cycle) | fmax | 15 | MHz | VCC=3.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 | ||
| Maximum Clock Frequency (50% Duty Cycle) | fmax | 30 | MHz | VCC=4.5 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 | ||
| Maximum Clock Frequency (50% Duty Cycle) | fmax | 35 | MHz | VCC=6.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 | ||
| Maximum Propagation Delay, Clock to Q (tPLH) | tPLH | 120 | ns | VCC=2.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 | ||
| Maximum Propagation Delay, Clock to Q (tPLH) | tPLH | 75 | ns | VCC=3.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 | ||
| Maximum Propagation Delay, Clock to Q (tPLH) | tPLH | 20 | ns | VCC=4.5 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 | ||
| Maximum Propagation Delay, Clock to Q (tPLH) | tPLH | 16 | ns | VCC=6.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 | ||
| Maximum Propagation Delay, Clock to Q (tPHL) | tPHL | 145 | ns | VCC=2.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 | ||
| Maximum Propagation Delay, Clock to Q (tPHL) | tPHL | 100 | ns | VCC=3.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 | ||
| Maximum Propagation Delay, Clock to Q (tPHL) | tPHL | 22 | ns | VCC=4.5 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 | ||
| Maximum Propagation Delay, Clock to Q (tPHL) | tPHL | 18 | ns | VCC=6.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 | ||
| Maximum Input Capacitance | Cin | 10 | pF | Figure 4, 10; -55 to 25 C | 5 |
CAD (KiCad official)
- Symbol:
MC74HC161ADG - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
mc74hc161adg-etched.step/mc74hc161adg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc74hc161adg.step/mc74hc161adg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (17 pp, sha256
ed9373a896dd3be7, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MC74HC161ADG
**onsemi** · Counters / Dividers · SOIC-16
MC74HC161ADG from onsemi, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RESET | input | Low level resets the internal flip-flops and forces Q0 through Q3 low; on the HC161A this reset is asynchronous. |
| 2 | CLOCK | input | Internal flip-flops toggle and the output count advances on the rising edge of the Clock input. |
| 3 | P0 | input | Preset data input P0, the least-significant bit, loaded synchronously when Load is low. |
| 4 | P1 | input | Preset data input P1, loaded synchronously into the flip-flops on the rising clock edge when Load is low. |
| 5 | P2 | input | Preset data input P2, loaded synchronously into the flip-flops on the rising clock edge when Load is low. |
| 6 | P3 | input | Preset data input P3, the most-significant bit, loaded synchronously when Load is low. |
| 7 | ENABLE P | input | Count-enable control; the device counts only when Enable P, Enable T and Load are all high. |
| 8 | GND | power_in | Ground reference for the device (pin 8 = GND); all voltages are referenced to GND. |
| 9 | LOAD | input | A low level on Load, sampled on the rising clock edge, loads P0 to P3 into the outputs and disables counting. |
| 10 | ENABLE T | input | Count-enable and ripple-carry control; must be high together with Enable P and Load to count. |
| 11 | Q3 | output | Counter output Q3, the most-significant bit. |
| 12 | Q2 | output | Counter output Q2 of the 4-bit binary count. |
| 13 | Q1 | output | Counter output Q1 of the 4-bit binary count. |
| 14 | Q0 | output | Counter output Q0, the least-significant bit. |
| 15 | RIPPLE CARRY OUT | output | Goes high only when the counter is in its maximum state 1111 with Enable T high, providing a carry for cascaded counters. |
| 16 | VCC | power_in | Positive supply (pin 16 = VCC); recommended operating range 2.0 V to 6.0 V referenced to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-16 |
| Category | Logic ICs |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Supply Voltage | VCC | -0.5 | | 7 | V | Maximum Ratings | 3 |
| DC Input Voltage | VI | -0.5 | | | V | Maximum; upper limit VCC+0.5 V as printed | 3 |
| DC Output Voltage | VO | -0.5 | | | V | Maximum; upper limit VCC+0.5 V as printed (Note 1) | 3 |
| DC Input Diode Current | IIK | | | 20 | mA | | 3 |
| DC Output Diode Current | IOK | | | 25 | mA | | 3 |
| DC Output Sink Current | IO | | | 25 | mA | | 3 |
| DC Supply Current per Supply Pin | ICC | | | 50 | mA | | 3 |
| DC Ground Current per Ground Pin | IGND | | | 50 | mA | | 3 |
| Storage Temperature Range | TSTG | -65 | | 150 | C | | 3 |
| Lead Temperature | TL | | | 260 | C | 1 mm from case for 10 seconds | 3 |
| Junction Temperature Under Bias | TJ | | | 150 | C | | 3 |
| Power Dissipation in Still Air at 85C | PD | | | 500 | mW | SOIC package at 85C | 3 |
| ESD Withstand Voltage, Human Body Model | VESD | | | 2000 | V | Human Body Model (Note 2) | 3 |
| ESD Withstand Voltage, Machine Model | VESD | | | 200 | V | Machine Model (Note 3) | 3 |
| Thermal Resistance, Junction-to-Ambient | θJA | | 112 | | C/W | SOIC package | 3 |
| DC Supply Voltage | VCC | 2 | | 6 | V | Referenced to GND | 3 |
| DC Input Voltage, Output Voltage | Vin, Vout | 0 | | | V | Referenced to GND; maximum VCC as printed | 3 |
| Operating Temperature, All Package Types | TA | -55 | | 125 | C | | 3 |
| Input Rise and Fall Time | tr, tf | 0 | | 1000 | ns | VCC=2.0 V (Figure 4) | 3 |
| Input Rise and Fall Time | tr, tf | 0 | | 600 | ns | VCC=3.0 V (Figure 4) | 3 |
| Input Rise and Fall Time | tr, tf | 0 | | 500 | ns | VCC=4.5 V (Figure 4) | 3 |
| Input Rise and Fall Time | tr, tf | 0 | | 400 | ns | VCC=6.0 V (Figure 4) | 3 |
| Minimum High-Level Input Voltage | VIH | 1.5 | | | V | VCC=2.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 |
| Minimum High-Level Input Voltage | VIH | 2.1 | | | V | VCC=3.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 |
| Minimum High-Level Input Voltage | VIH | 3.15 | | | V | VCC=4.5 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 |
| Minimum High-Level Input Voltage | VIH | 4.2 | | | V | VCC=6.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 |
| Maximum Low-Level Input Voltage | VIL | | | 0.5 | V | VCC=2.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 |
| Maximum Low-Level Input Voltage | VIL | | | 0.9 | V | VCC=3.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 |
| Maximum Low-Level Input Voltage | VIL | | | 1.35 | V | VCC=4.5 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 |
| Maximum Low-Level Input Voltage | VIL | | | 1.8 | V | VCC=6.0 V; Vout=0.1 V or VCC-0.1 V; /Iout/<=20 uA; -55 to 25 C | 4 |
| Minimum High-Level Output Voltage | VOH | 1.9 | | | V | VCC=2.0 V; Vin=VIH or VIL; /Iout/<=20 uA; -55 to 25 C | 4 |
| Minimum High-Level Output Voltage | VOH | 4.4 | | | V | VCC=4.5 V; Vin=VIH or VIL; /Iout/<=20 uA; -55 to 25 C | 4 |
| Minimum High-Level Output Voltage | VOH | 5.9 | | | V | VCC=6.0 V; Vin=VIH or VIL; /Iout/<=20 uA; -55 to 25 C | 4 |
| Minimum High-Level Output Voltage | VOH | 2.48 | | | V | VCC=3.0 V; Vin=VIH or VIL; /Iout/<=3.6 mA; -55 to 25 C | 4 |
| Minimum High-Level Output Voltage | VOH | 3.98 | | | V | VCC=4.5 V; Vin=VIH or VIL; /Iout/<=4.0 mA; -55 to 25 C | 4 |
| Minimum High-Level Output Voltage | VOH | 5.48 | | | V | VCC=6.0 V; Vin=VIH or VIL; /Iout/<=5.2 mA; -55 to 25 C | 4 |
| Maximum Low-Level Output Voltage | VOL | | | 0.1 | V | VCC=2.0 V; Vin=VIH or VIL; /Iout/<=20 uA; -55 to 25 C | 4 |
| Maximum Low-Level Output Voltage | VOL | | | 0.26 | V | VCC=3.0 V; Vin=VIH or VIL; /Iout/<=3.6 mA; -55 to 25 C | 4 |
| Maximum Input Leakage Current | Iin | -0.1 | | 0.1 | uA | Vin=VCC or GND; VCC=6.0 V; -55 to 25 C | 4 |
| Maximum Quiescent Supply Current | ICC | | | 4 | uA | Vin=VCC or GND; Iout=0 uA; VCC=6.0 V; -55 to 25 C | 4 |
| Maximum Clock Frequency (50% Duty Cycle) | fmax | 6 | | | MHz | VCC=2.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 |
| Maximum Clock Frequency (50% Duty Cycle) | fmax | 15 | | | MHz | VCC=3.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 |
| Maximum Clock Frequency (50% Duty Cycle) | fmax | 30 | | | MHz | VCC=4.5 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 |
| Maximum Clock Frequency (50% Duty Cycle) | fmax | 35 | | | MHz | VCC=6.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 |
| Maximum Propagation Delay, Clock to Q (tPLH) | tPLH | | | 120 | ns | VCC=2.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 |
| Maximum Propagation Delay, Clock to Q (tPLH) | tPLH | | | 75 | ns | VCC=3.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 |
| Maximum Propagation Delay, Clock to Q (tPLH) | tPLH | | | 20 | ns | VCC=4.5 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 |
| Maximum Propagation Delay, Clock to Q (tPLH) | tPLH | | | 16 | ns | VCC=6.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 |
| Maximum Propagation Delay, Clock to Q (tPHL) | tPHL | | | 145 | ns | VCC=2.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 |
| Maximum Propagation Delay, Clock to Q (tPHL) | tPHL | | | 100 | ns | VCC=3.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 |
| Maximum Propagation Delay, Clock to Q (tPHL) | tPHL | | | 22 | ns | VCC=4.5 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 |
| Maximum Propagation Delay, Clock to Q (tPHL) | tPHL | | | 18 | ns | VCC=6.0 V; CL=50 pF; Input tr=tf=6.0 ns; -55 to 25 C | 5 |
| Maximum Input Capacitance | Cin | | | 10 | pF | Figure 4, 10; -55 to 25 C | 5 |
## CAD (KiCad official)
- Symbol: `MC74HC161ADG`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files: `mc74hc161adg-etched.step` / `mc74hc161adg-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mc74hc161adg.step` / `mc74hc161adg.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc74hc161a-d.pdf) (17 pp, sha256 `ed9373a896dd3be7`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mc74hc161adg-datasheet.pdf)