main
Ray Publish 0.1.1 8c24b3e
{
  "schema_version": 1,
  "type": "component",
  "slug": "mc705p6acdwe",
  "title": "MC705P6ACDWE",
  "brief": "NXP Semicon NXP MCU, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "mc705p6acdwe",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MC705P6ACDWE",
    "manufacturer": "NXP Semicon",
    "package": "SOIC-28-300mil",
    "pin_count": 28,
    "category": "Embedded Processors & Controllers",
    "subcategory": "NXP MCU",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/f4ca7f61de8b59a9733d367bf2cb0c55.pdf",
    "parts": {
      "symbol": "mc705p6acdwe.kicad_sym",
      "footprint": "mc705p6acdwe.kicad_mod",
      "model_3d": "mc705p6acdwe-hero.glb",
      "model_3d_plain": "mc705p6acdwe.glb",
      "model_3d_step": "mc705p6acdwe-etched.step",
      "model_3d_step_plain": "mc705p6acdwe.step",
      "lbr": "mc705p6acdwe.lbr"
    },
    "distributor_links": {
      "lcsc": "C459981",
      "digikey": "MC705P6ACDWE-ND",
      "mouser": "841-MC705P6ACDWE"
    },
    "distributor_check": {
      "checked_at": "2026-11-10T01:08:52Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MC705P6ACDWE-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "841-MC705P6ACDWE",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RESET",
        "type": "input",
        "description": "Driving this Schmitt-trigger input low resets the MCU to a known startup state."
      },
      {
        "number": "2",
        "name": "IRQ/VPP",
        "type": "input",
        "description": "Maskable interrupt request input with an internal Schmitt trigger that also supplies the VPP programming voltage in bootloader mode, and must be tied to VDD if unused."
      },
      {
        "number": "3",
        "name": "PA7",
        "type": "bidirectional",
        "description": "Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup."
      },
      {
        "number": "4",
        "name": "PA6",
        "type": "bidirectional",
        "description": "Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup."
      },
      {
        "number": "5",
        "name": "PA5",
        "type": "bidirectional",
        "description": "Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup."
      },
      {
        "number": "6",
        "name": "PA4",
        "type": "bidirectional",
        "description": "Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup."
      },
      {
        "number": "7",
        "name": "PA3",
        "type": "bidirectional",
        "description": "Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup."
      },
      {
        "number": "8",
        "name": "PA2",
        "type": "bidirectional",
        "description": "Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup."
      },
      {
        "number": "9",
        "name": "PA1",
        "type": "bidirectional",
        "description": "Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup."
      },
      {
        "number": "10",
        "name": "PA0",
        "type": "bidirectional",
        "description": "Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup."
      },
      {
        "number": "11",
        "name": "SDO/PB5",
        "type": "bidirectional",
        "description": "Port B I/O pin shared with the SIOP serial data output, software programmable and input at reset."
      },
      {
        "number": "12",
        "name": "SDI/PB6",
        "type": "bidirectional",
        "description": "Port B I/O pin shared with the SIOP serial data input, software programmable and input at reset."
      },
      {
        "number": "13",
        "name": "SCK/PB7",
        "type": "bidirectional",
        "description": "Port B I/O pin shared with the SIOP serial clock, software programmable and input at reset."
      },
      {
        "number": "14",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground connection for the MCU, which needs good high-frequency bypassing close to the device."
      },
      {
        "number": "15",
        "name": "PC7/VREFH",
        "type": "bidirectional",
        "description": "Port C I/O pin shared with the A/D converter high reference voltage, software programmable and input at reset."
      },
      {
        "number": "16",
        "name": "PC6/AD0",
        "type": "bidirectional",
        "description": "Port C I/O pin shared with A/D converter channel AD0, software programmable and input at reset."
      },
      {
        "number": "17",
        "name": "PC5/AD1",
        "type": "bidirectional",
        "description": "Port C I/O pin shared with A/D converter channel AD1, software programmable and input at reset."
      },
      {
        "number": "18",
        "name": "PC4/AD2",
        "type": "bidirectional",
        "description": "Port C I/O pin shared with A/D converter channel AD2, software programmable and input at reset."
      },
      {
        "number": "19",
        "name": "PC3/AD3",
        "type": "bidirectional",
        "description": "Port C I/O pin shared with A/D converter channel AD3, software programmable and input at reset."
      },
      {
        "number": "20",
        "name": "PC2",
        "type": "bidirectional",
        "description": "Port C general-purpose I/O pin, software programmable and input at reset."
      },
      {
        "number": "21",
        "name": "PC1",
        "type": "bidirectional",
        "description": "Port C general-purpose I/O pin, software programmable and input at reset."
      },
      {
        "number": "22",
        "name": "PC0",
        "type": "bidirectional",
        "description": "Port C general-purpose I/O pin, software programmable and input at reset."
      },
      {
        "number": "23",
        "name": "PD5",
        "type": "bidirectional",
        "description": "Port D general-purpose I/O pin, software programmable and input at reset."
      },
      {
        "number": "24",
        "name": "TCMP",
        "type": "output",
        "description": "Output of the 16-bit timer output compare function, low after reset."
      },
      {
        "number": "25",
        "name": "PD7/TCAP",
        "type": "input",
        "description": "Port D input-only pin shared with the 16-bit timer input capture, readable at any time and used with IRQ/VPP to select the operating mode at reset."
      },
      {
        "number": "26",
        "name": "OSC2",
        "type": "output",
        "description": "Oscillator connection for a crystal or ceramic resonator, left unconnected when an external clock drives OSC1."
      },
      {
        "number": "27",
        "name": "OSC1",
        "type": "input",
        "description": "Oscillator input for a crystal, ceramic resonator or external CMOS-compatible clock, divided by two to give the internal bus clock."
      },
      {
        "number": "28",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply connected to a regulated +5 volt supply, with good high-frequency bypassing close to the MCU."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbering was read from the Figure 3-1 text extraction, which lists names in layout order withou; The ordering table lists MC68HC705P6ACDW (SOIC); the requested MPN MC705P6ACDWE appears to be a diff"
        ],
        "pages_sent": 24,
        "cost_usd": 0.1398,
        "at": "2026-11-10T01:08:33"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/f4ca7f61de8b59a9733d367bf2cb0c55.pdf",
        "pages": 98,
        "sha256": "6639c6671dd230fc",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 28,
        "described": 28,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "mc705p6acdwe.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          17.9,
          2.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b889a13dbe9ec59e79fa9f1b5118b00bfa54f9582392335ff3365b64afc264b1",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mc705p6acdwe-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          17.9,
          2.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "faf4996471f90f5f8761ea1fe21e384ba83b3a7bf62c1aee4a381adf6343416a",
        "checked": "2026-11-10",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "NXP Semicon",
      "Package": "SOIC-28-300mil",
      "Category": "Embedded Processors & Controllers",
      "Pins": "28"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "6639c6671dd230fc6efe3b4054921d6a442590db574e6e9a2eb5624c789ae14c",
      "rows": [
        {
          "name": "Supply voltage",
          "symbol": "VDD",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 7,
          "conditions": "Voltages referenced to VSS",
          "source_page": 85,
          "source": "datasheet"
        },
        {
          "name": "Current drain per pin excluding VDD and VSS",
          "symbol": "I",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 25,
          "conditions": "",
          "source_page": 85,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature range",
          "symbol": "Tstg",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 85,
          "source": "datasheet"
        },
        {
          "name": "Operating temperature range, extended (MC68HC705P6AC)",
          "symbol": "TL to TH",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "Extended grade (C suffix)",
          "source_page": 85,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance, SOIC",
          "symbol": "θJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 60,
          "max": null,
          "conditions": "SOIC package",
          "source_page": 85,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "mc705p6acdwe"
  ],
  "discovery_pitch": "MC705P6ACDWE (NXP Semicon) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mc705p6acdwe.kicad_sym",
    "mc705p6acdwe.kicad_mod",
    "mc705p6acdwe.glb",
    "mc705p6acdwe.step",
    "mc705p6acdwe.lbr",
    "docs/hero.png",
    "docs/mc705p6acdwe-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mc705p6acdwe-hero.glb",
    "mc705p6acdwe-hero.overlay.json",
    "mc705p6acdwe-etched.glb",
    "mc705p6acdwe-etched.step"
  ],
  "visibility": "public",
  "description": "NXP Semicon NXP MCU, SOIC-28-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}