main
History Download
Ray Publish 0.1.0 422af42

MC705P6ACDWE

NXP Semicon · NXP MCU · SOIC-28-300mil

MC705P6ACDWE from NXP Semicon, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RESET input Driving this Schmitt-trigger input low resets the MCU to a known startup state.
2 IRQ/VPP input Maskable interrupt request input with an internal Schmitt trigger that also supplies the VPP programming voltage in bootloader mode, and must be tied to VDD if unused.
3 PA7 bidirectional Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup.
4 PA6 bidirectional Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup.
5 PA5 bidirectional Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup.
6 PA4 bidirectional Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup.
7 PA3 bidirectional Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup.
8 PA2 bidirectional Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup.
9 PA1 bidirectional Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup.
10 PA0 bidirectional Port A software-programmable I/O pin, input at reset, with mask-option interrupt capability and selectable internal pullup.
11 SDO/PB5 bidirectional Port B I/O pin shared with the SIOP serial data output, software programmable and input at reset.
12 SDI/PB6 bidirectional Port B I/O pin shared with the SIOP serial data input, software programmable and input at reset.
13 SCK/PB7 bidirectional Port B I/O pin shared with the SIOP serial clock, software programmable and input at reset.
14 VSS power_in Ground connection for the MCU, which needs good high-frequency bypassing close to the device.
15 PC7/VREFH bidirectional Port C I/O pin shared with the A/D converter high reference voltage, software programmable and input at reset.
16 PC6/AD0 bidirectional Port C I/O pin shared with A/D converter channel AD0, software programmable and input at reset.
17 PC5/AD1 bidirectional Port C I/O pin shared with A/D converter channel AD1, software programmable and input at reset.
18 PC4/AD2 bidirectional Port C I/O pin shared with A/D converter channel AD2, software programmable and input at reset.
19 PC3/AD3 bidirectional Port C I/O pin shared with A/D converter channel AD3, software programmable and input at reset.
20 PC2 bidirectional Port C general-purpose I/O pin, software programmable and input at reset.
21 PC1 bidirectional Port C general-purpose I/O pin, software programmable and input at reset.
22 PC0 bidirectional Port C general-purpose I/O pin, software programmable and input at reset.
23 PD5 bidirectional Port D general-purpose I/O pin, software programmable and input at reset.
24 TCMP output Output of the 16-bit timer output compare function, low after reset.
25 PD7/TCAP input Port D input-only pin shared with the 16-bit timer input capture, readable at any time and used with IRQ/VPP to select the operating mode at reset.
26 OSC2 output Oscillator connection for a crystal or ceramic resonator, left unconnected when an external clock drives OSC1.
27 OSC1 input Oscillator input for a crystal, ceramic resonator or external CMOS-compatible clock, divided by two to give the internal bus clock.
28 VDD power_in Positive supply connected to a regulated +5 volt supply, with good high-frequency bypassing close to the MCU.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package SOIC-28-300mil
Category Embedded Processors & Controllers
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD -0.3 7 V Voltages referenced to VSS 85
Current drain per pin excluding VDD and VSS I 25 mA 85
Storage temperature range Tstg -65 150 °C 85
Operating temperature range, extended (MC68HC705P6AC) TL to TH -40 85 °C Extended grade (C suffix) 85
Thermal resistance, SOIC θJA 60 °C/W SOIC package 85

CAD (KiCad official)

  • Symbol: MC705P6ACDWE
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: mc705p6acdwe-etched.step / mc705p6acdwe-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc705p6acdwe.step / mc705p6acdwe.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (98 pp, sha256 6639c6671dd230fc, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF