Generated by kicad-footprint-generator · KiCad file format 20260206
MC4580G-S08-R
UTC Unisonic Tech · Operational Amplifier · SOP-8
MC4580G-S08-R from UTC Unisonic Tech, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of op-amp channel 1. |
| 2 | IN1- | input | Inverting input of op-amp channel 1. |
| 3 | IN1+ | input | Non-inverting input of op-amp channel 1. |
| 4 | VEE | power_in | Negative supply rail (or GND in single-supply operation). Typical supply range ±4V to ±18V. |
| 5 | IN2+ | input | Non-inverting input of op-amp channel 2. |
| 6 | IN2- | input | Inverting input of op-amp channel 2. |
| 7 | OUT2 | output | Output of op-amp channel 2. |
| 8 | VCC | power_in | Positive supply rail. Typical supply range ±4V to ±18V (single-supply 8V to 36V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UTC Unisonic Tech |
| Package | SOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
MC4580G-S08-R
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | V+/V- | -18 | 18 | V | 4 | ||
| Input Voltage | VIN | -15 | 15 | V | 4 | ||
| Differential Input Voltage | VI(DIFF) | -30 | 30 | V | 4 | ||
| Output Current | IOUT | -50 | 50 | mA | 4 | ||
| Power Dissipation | PD | 440 | mW | SOP-8 package | 4 | ||
| Junction Temperature | TJ | 125 | C | 4 | |||
| Operating Temperature | TOPR | -40 | 85 | °C | 4 | ||
| Storage Temperature | TSTG | -40 | 125 | C | 4 | ||
| Operating Voltage (features, ±2V to ±18V) | V+/V- | 2 | 18 | V | Operating voltage range as stated in features list (±2V ~ ±18V) | 1 | |
| Input Offset Voltage | VI(OFF) | 0.5 | 3 | mV | RS≦10kΩ | 4 | |
| Input Offset Current | II(OFF) | 5 | 200 | nA | 4 | ||
| Input Bias Current | II(BIAS) | 100 | 500 | nA | 4 | ||
| Large Signal Voltage Gain | Gv | 90 | 110 | dB | VOUT=±10V, RL≧2kΩ | 4 | |
| Output Voltage Swing | VOM | 12 | 13.5 | V | RL≧2kΩ | 4 | |
| Input Common Mode Voltage | VI(CM) | 12 | 13.5 | V | 4 | ||
| Common Mode Rejection Ratio | CMRR | 80 | 110 | dB | RS≦10kΩ | 4 | |
| Supply Voltage Rejection Ratio | SVR | 80 | 110 | dB | Rs≦10kΩ | 4 | |
| Operating Current | ICC | 6 | 9 | mA | 4 | ||
| Slew Rate | SR | 5 | V/µs | RL≧2kΩ | 4 | ||
| Gain Bandwidth Product | GB | 15 | MHz | f=10KHz | 4 | ||
| Total Harmonic Distortion | THD | 0.0005 | % | Gv=20dB,VOUT=5V,RL=2kΩ, f=1KHz | 4 | ||
| Input Noise Voltage | eN | 0.8 | µVrms | RIAA Rs=2.2 kΩ, 30kHzLPF | 4 |
CAD (KiCad official)
- Symbol:
MC4580G-S08-R - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mc4580g-s08-r-etched.step/mc4580g-s08-r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc4580g-s08-r.step/mc4580g-s08-r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UTC Unisonic Tech datasheet (7 pp, sha256
35b3458b29256244, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).