Generated by kicad-footprint-generator · KiCad file format 20260206
MC3486NSR
Texas Instruments · Pre-ordered Chips · SOIC-16-208mil
MC3486NSR from Texas Instruments, in a SOIC-16-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1B | input | Channel 1 differential receiver inverting input. |
| 2 | 1A | input | Channel 1 differential receiver non-inverting input. |
| 3 | 1Y | output | Channel 1 single-ended TTL-compatible output that goes to high impedance when the enable is low. |
| 4 | 1,2 EN | input | Active-high enable for channels 1 and 2; VIH minimum is 2 V and VIL maximum is 0.8 V. |
| 5 | 2Y | output | Channel 2 single-ended TTL-compatible output that goes to high impedance when the enable is low. |
| 6 | 2A | input | Channel 2 differential receiver non-inverting input. |
| 7 | 2B | input | Channel 2 differential receiver inverting input. |
| 8 | GND | power_in | Device ground. |
| 9 | 3B | input | Channel 3 differential receiver inverting input. |
| 10 | 3A | input | Channel 3 differential receiver non-inverting input. |
| 11 | 3Y | output | Channel 3 single-ended TTL-compatible output that goes to high impedance when the enable is low. |
| 12 | 3,4 EN | input | Active-high enable for channels 3 and 4; VIH minimum is 2 V and VIL maximum is 0.8 V. |
| 13 | 4Y | output | Channel 4 single-ended TTL-compatible output that goes to high impedance when the enable is low. |
| 14 | 4A | input | Channel 4 differential receiver non-inverting input. |
| 15 | 4B | input | Channel 4 differential receiver inverting input. |
| 16 | VCC | power_in | Device supply voltage, 4.75 V to 5.25 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-208mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage (A or B inputs) | VI | -15 | 15 | V | 4 | ||
| Differential input voltage | VID | -25 | 25 | V | see note 2 (measured at noninverting input with respect to inverting input) | 4 | |
| Enable input voltage | 8 | V | 4 | ||||
| Low-level output current | IOL | 50 | mA | 4 | |||
| Lead temperature | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 4.75 | 5 | 5.25 | V | 4 | |
| Common-mode input voltage | VIC | -7 | 7 | V | 4 | ||
| Differential input voltage | VID | -6 | 6 | V | 4 | ||
| High-level enable input voltage | VIH | 2 | V | 4 | |||
| Low-level enable input voltage | VIL | 0.8 | V | 4 | |||
| Operating free-air temperature | TA | 0 | 70 | °C | 4 | ||
| Junction-to-ambient thermal resistance (NS) | RθJA | 88.5 | °C/W | NS (SOP) 16-pin package | 4 | ||
| Junction-to-case (top) thermal resistance (NS) | RθJC(top) | 46.2 | °C/W | NS (SOP) 16-pin package | 4 | ||
| Junction-to-board thermal resistance (NS) | RθJB | 50.7 | °C/W | NS (SOP) 16-pin package | 4 | ||
| Junction-to-top characterization parameter (NS) | ψJT | 13.5 | °C/W | NS (SOP) 16-pin package | 4 | ||
| Junction-to-board characterization parameter (NS) | ψJB | 50.3 | °C/W | NS (SOP) 16-pin package | 4 | ||
| Differential input low-threshold voltage | VIT- | -0.2 | V | VO = 0.5 V, IO = -8 mA | 5 | ||
| Differential input high-threshold voltage | VIT+ | 0.2 | V | VO = 2.7 V, IO = -0.4 mA | 5 | ||
| Enable-input clamp voltage | VIK | -1.5 | V | II = -10 mA | 5 | ||
| High-level output voltage | VOH | 2.7 | V | VID = 0.4 V, see note 4 and Figure 6-1; IO = -0.4 mA | 5 | ||
| Low-level output voltage | VOL | 0.5 | V | VID = -0.4 V, see note 4 and Figure 6-1; IO = 8 mA | 5 | ||
| High-impedance-state output current | IOZ | 40 | μA | VIL = 0.8 V, VID = -3 V, VO = 2.7 V | 5 | ||
| High-impedance-state output current | IOZ | -40 | μA | VIL = 0.8 V, VID = 3 V, VO = 0.5 V | 5 | ||
| Differential-input bias current | IIB | -3.25 | mA | VCC = 0 V or 2.25 V, other inputs at 0 V, VI = -10 V | 5 | ||
| Differential-input bias current | IIB | -1.5 | mA | VCC = 0 V or 2.25 V, other inputs at 0 V, VI = -3 V | 5 | ||
| Differential-input bias current | IIB | 1.5 | mA | VCC = 0 V or 2.25 V, other inputs at 0 V, VI = 3 V | 5 | ||
| Differential-input bias current | IIB | 3.25 | mA | VCC = 0 V or 2.25 V, other inputs at 0 V, VI = 10 V | 5 | ||
| High-level enable input current | IIH | 100 | μA | VI = 2.25 V | 5 | ||
| High-level enable input current | IIH | 20 | μA | VI = 2.7 V | 5 | ||
| Low-level enable input current | IIL | -100 | μA | VI = -0.5 V | 5 | ||
| Short-circuit output current | IOS | -100 | -15 | mA | VID = 3 V, VO = 0, see note 5 | 5 | |
| Supply current | ICC | 85 | mA | VIL = 0 | 5 | ||
| Propagation delay time, high- to low-level output | tPHL | 28 | 35 | ns | VCC = 5 V, CL = 15 pF, TA = 25°C; see Figure 6-2 | 5 | |
| Propagation delay time, low- to high-level output | tPLH | 27 | 30 | ns | VCC = 5 V, CL = 15 pF, TA = 25°C; see Figure 6-2 | 5 | |
| Output enable time to high level | tPZH | 13 | 30 | ns | VCC = 5 V, CL = 15 pF, TA = 25°C; see Figure 6-3 | 5 | |
| Output enable time to low level | tPZL | 20 | 30 | ns | VCC = 5 V, CL = 15 pF, TA = 25°C; see Figure 6-3 | 5 | |
| Output disable time from high level | tPHZ | 26 | 35 | ns | VCC = 5 V, CL = 15 pF, TA = 25°C; see Figure 6-3 | 5 | |
| Output disable time from low level | tPLZ | 27 | 35 | ns | VCC = 5 V, CL = 15 pF, TA = 25°C; see Figure 6-3 | 5 |
CAD (KiCad official)
- Symbol:
MC3486NSR - Footprint:
Package_SO:SOIC-16W_5.3x10.2mm_P1.27mm - 3D model: SOIC-16-208mil (KiCad packages3D, STEP)
- 3D model files:
mc3486nsr-etched.step/mc3486nsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc3486nsr.step/mc3486nsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (20 pp, sha256
7a341231554b96ab, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).