main
History Download
Ray Publish 0.1.0 0519801

MC34844AEPR2

NXP Semicon · LED Drivers · QFN-32-EP(5x5)

MC34844AEPR2 from NXP Semicon, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input supply for the IC, used to generate internal regulators (VDC1, VDC3) and as the boost input; operates from 7.0 to 28 V (30 V max).
2 PGNDB power_in Power ground terminal for the internal boost FET.
3 SWB passive Boost converter switching node B; maximum pin voltage 65 V.
4 SWA passive Boost converter switching node A; maximum pin voltage 65 V.
5 PGNDA power_in Power ground terminal for the internal boost FET.
6 A0/SEN input Address select, device select pin or hardware overvoltage protection (OVP) control; maximum pin voltage 7.0 V.
7 EN input Active-high enable, internally pulled high; 0 V stops the IC; maximum pin voltage 30 V.
8 I0 input LED string connection (current sink channel 0) capable of up to 50 mA per the functional description; 45 V maximum in off-state.
9 I1 input LED string connection (current sink channel 1) capable of up to 50 mA per the functional description; 45 V maximum in off-state.
10 I2 input LED string connection (current sink channel 2) capable of up to 50 mA per the functional description; 45 V maximum in off-state.
11 I3 input LED string connection (current sink channel 3) capable of up to 50 mA per the functional description; 45 V maximum in off-state.
12 I4 input LED string connection (current sink channel 4) capable of up to 50 mA per the functional description; 45 V maximum in off-state.
13 I5 input LED string connection (current sink channel 5) capable of up to 50 mA per the functional description; 45 V maximum in off-state.
14 I6 input LED string connection (current sink channel 6) capable of up to 50 mA per the functional description; 45 V maximum in off-state.
15 I7 input LED string connection (current sink channel 7) capable of up to 50 mA per the functional description; 45 V maximum in off-state.
16 I8 input LED string connection (current sink channel 8) capable of up to 50 mA per the functional description; 45 V maximum in off-state.
17 I9 input LED string connection (current sink channel 9) capable of up to 50 mA per the functional description; 45 V maximum in off-state.
18 FAIL output Open-drain fault detection pin: low-impedance when no failure, high-impedance on failure; maximum pin voltage 6.0 V.
19 ISET passive LED current setting resistor connection to GND that sets the maximum LED current.
20 PIN input Positive analog current scaling input: 0 V gives near 0%, VSET (2.048 V typ.) gives 100%, above 2.2 V disables scaling.
21 NIN input Negative analog current scaling input: 0 V gives 100%, VSET (2.048 V typ.) gives near 0%, above 2.2 V disables scaling.
22 SLOPE passive Boost slope compensation setting resistor, value depends on input/output voltage difference and inductor value.
23 VDC3 power_out Internal regulator 3 output for PLL power, internal use only; needs a 2.2 µF capacitor to ground (1.0 kΩ to VDC1 recommended below -20 °C).
24 CK bidirectional Clock synchronization pin: input in slave mode (M/~S low, internal pull-up), output in master mode (M/~S high).
25 PWM input External PWM input with internal pull-down, used to modulate the LED channels directly without I2C.
26 SDA bidirectional I2C data line.
27 SCK bidirectional I2C clock line.
28 VDC1 power_out Internal regulator 1 output for internal logic rail, internal use only; needs a 2.2 µF capacitor to ground.
29 COMP passive Boost converter compensation pin; connect a series capacitor and resistor to GND.
30 M/~S input Master/slave selector: high selects Master mode (CK output), low selects Slave mode (CK input).
31 VDC2 power_out Internal regulator 2 output, internal use only; needs a 2.2 µF capacitor to ground.
32 VOUT input Boost output voltage sense pin, also supplies internal regulator 2; maximum pin voltage 65 V.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package QFN-32-EP(5x5)
Category Display Modules / LED Drivers / Display Drivers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VIN 7 12 28 V 8
Undervoltage Lockout (VIN Rising) UVLO 5.4 6 6.4 V VIN rising 8
VDC1 Voltage VDC1 2.3 2.5 2.75 V CVDC1 = 2.2 F 8
VDC2 Voltage VDC2 5.5 6 6.5 V CVDC2 = 2.2 F 8
VDC3 Voltage VDC3 2.3 2.5 2.75 V CVDC3 = 2.2 F 8
Boost Output Voltage Range VOUT1 8 28 V VIN = 7.0 V 8
Boost Output Voltage Range VOUT2 32 60 V VIN = 28 V 8
Boost Switch Current Limit IFET 2.3 2.5 2.7 A 8
RDS(ON) of Internal FET RDS(ON) 250 500 mΩ IDRAIN = 1.0 A 8
Boost Switch Off-state Leakage Current IBOOST_LEAK 10 mA VSWA,SWB = 65 V 8
Feedback pin Off-state Leakage Current VOUTLEAK 500 700 mA VOUT = 65 V 8
Line Regulation IOUT/VIN -0.2 0.2 %/V VIN = 7.0 to 28 V 8
Load Regulation IOUT/VLED -0.2 0.2 %/V VLED = 8.0 to 65 V (all Channels) 8
FAIL Off-state Leakage Current IFAIL_LEAK 50 A VFAIL = 5.5 V 9
FAIL On-state Voltage Drop VOL 0.4 V ISINK = 4.0 mA 9
LED Sink Current ISINK 78.4 80 81.6 mA ICHx Register = 255, PIN&NIN = Disabled, TA=25 °C, RISET=3.48 k 0.1% 9
Regulated minimum voltage across drivers VMIN 625 700 775 mV Pulse Width > 400 ns 9
Current Matching Accuracy IMATCH -2 2 % 9
ISET Pin Voltage VSET 2.007 2.048 2.069 V RISET=3.48 k 0.1% 9
Channel Off-state Leakage Current ICH_LEAK 10 A VCH = 45 V 9
Voltage to Disable PIN mode VPIN_DIS 2.2 V 9
PIN Bias Current IPIN -2 2 A PIN = VSET 9
Analog Dimming Current (PIN = VSET/2) IDIM_PIN 36 40 44 mA ICHx Register = 255, RISET=3.48 k 0.1%, PIN = VSET/2 9
Analog Dimming Current (PIN = VSET) IDIM_PIN 76 80 84 mA ICHx Register = 255, RISET=3.48 k 0.1%, PIN = VSET 9
Voltage to Disable NIN mode VNIN_DIS 2.2 V 9
NIN Bias Current ININ -2 2 A NIN = VSET 9
Analog Dimming Current (NIN = VSET/2) IDIM_NIN 36 40 44 mA ICHx Register = 255, RISET=3.48 k 0.1%, NIN = VSET/2 9
Analog Dimming Current (NIN = 0 V) IDIM_NIN 76 80 84 mA ICHx Register = 255, RISET=3.48 k 0.1%, NIN = 0 V 9
Over-temperature Threshold Rising OTT 150 165 175 °C Rising 10
I2C/SMBus Input Low Voltage VILI -0.3 0.8 V 10
I2C/SMBus Input High Voltage VIHI 2.1 5.5 V 10
I2C/SMBus Output Low Voltage VOLI 0.4 V Sink Current < 4.0 mA 10
I2C/SMBus Input Current IINI -5 5 A 10
Logic Input Low Voltage VILL -0.3 0.5 V CK, M/~S, PWM, A0/SEN, EN 10
Logic Input High Voltage VIHL 1.5 5.5 V CK, M/~S, PWM, A0/SEN, EN 10
Input Low Voltage (EN) VILL -0.3 0.5 V EN 10
Input High Voltage (EN) VIHL 2.1 28 V EN 10
Output Low Voltage (CK) VOLL 0.45 V ISINK < 2.0 mA 10
Output High Voltage (CK) VOHL 2.2 5.5 V ISOURCE < 2.0 mA 10
Logic Input Current IIIL -5 5 A 10
OVP threshold OVP = Fh (Default) OVPFH 60.5 62.5 64.5 V OVP = Fh (Default) 10
OVP threshold OVP = Eh OVPEH 56.5 58 60 V OVP = Eh 10
OVP threshold OVP = Dh OVPDH 53 54 56 V OVP = Dh 10
OVP threshold OVP = Ch OVPCH 49 51 52.5 V OVP = Ch 10
OVP threshold OVP = Bh OVPBH 45 47 48.5 V OVP = Bh 10
OVP threshold OVP = Ah OVPAH 41 43 44.5 V OVP = Ah 10
OVP threshold OVP = 9h OVP9H 38 39 40.5 V OVP = 9h 10
OVP threshold OVP = 8h OVP8H 34 36 37.5 V OVP = 8h 10
OVP threshold OVP = 7h OVP7H 30.5 32 33.5 V OVP = 7h 10
OVP threshold OVP = 6h OVP6H 26 28 30 V OVP = 6h 11
OVP threshold OVP = 5h OVP5H 23 24 25 V OVP = 5h 11
OVP threshold set by hardware OVPHW 6.15 6.5 6.85 V Voltage at A0/SEN 11
A0/SEN Sink Current ISINK_OVP 70 100 130 A TA=25°C 11
Switching Frequency fSW0 0.14 0.16 0.18 MHz BST [1:0]=0 11
Switching Frequency fSW1 0.29 0.32 0.35 MHz BST [1:0]=1 (Default) 11
Switching Frequency fSW2 0.59 0.65 0.72 MHz BST [1:0]=2 11
Switching Frequency fSW3 1.17 1.3 1.42 MHz BST [1:0]=3 11
Maximum Duty Cycle DMAX 80 85 % 11
Minimum Duty Cycle DMIN 10 15 % 11
Ambient Temperature Range TA -40 105 °C 7
Maximum junction temperature TJ 150 °C 7
Junction to Ambient Thermal Resistance TJA 32 °C/W Per JEDEC51 Standard for Multilayer PCB 7
Junction to Case Thermal Resistance TJC 3.5 °C/W Per JEDEC51 Standard for Multilayer PCB 7

CAD (KiCad official)

  • Symbol: MC34844AEPR2
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: mc34844aepr2-etched.step / mc34844aepr2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc34844aepr2.step / mc34844aepr2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (37 pp, sha256 25d4ee7c8a121302, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF