Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MC34063AD

Texas Instruments · DC-DC Converters · SOIC-8

MC34063AD from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Switch Collector output High-current internal switch collector output with maximum voltage rating of 40 V; provides switching stage output for DC-DC conversion topologies.
2 Switch Emitter output High-current internal switch emitter output with maximum voltage rating of 40 V; provides return path for the switching stage.
3 Timing Capacitor passive Attach an external timing capacitor to set the oscillator frequency; frequency is inversely proportional to capacitor value.
4 GND power_in Ground reference for the device.
5 Comparator Inverting Input input Comparator inverting input for feedback from resistor divider network; internal threshold voltage is 1.25 V with 2% accuracy.
6 VCC power_in Logic and driver supply voltage with operating range from 3 V to 40 V; should be tied to input voltage VIN.
7 IPK input Current-limit sense input with threshold voltage of 250 mV to 350 mV; monitors internal switch current for short-circuit and overcurrent protection.
8 Driver Collector output Darlington pair driver collector output to drive external high-current switch transistor; maximum collector current is 100 mA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 40 V 4
Comparator inverting input voltage range VIR -0.3 40 V 4
Switch collector voltage VC(switch) 40 V 4
Switch emitter voltage VE(switch) 40 V VPIN1 = 40 V 4
Switch collector to switch emitter voltage VCE(switch) 40 V 4
Driver collector voltage VC(driver) 40 V 4
Driver collector current IC(driver) 100 mA 4
Switch current ISW 1.5 A 4
Operating virtual junction temperature TJ 150 °C 4
Storage temperature range Tstg -65 150 °C 4
Supply voltage VCC 3 40 V 4
Operating free-air temperature (MC34063A) TA 0 70 °C MC34063A 4
Oscillator frequency fosc 24 33 42 kHz VPIN5 = 0 V, CT = 1 nF, TA = 25°C 4
Charge current Ichg 24 35 42 μA VCC = 5 V to 40 V, TA = 25°C 4
Discharge current Idischg 140 220 260 μA VCC = 5 V to 40 V, TA = 25°C 4
Discharge-to-charge current ratio Idischg/Ichg 5.2 6.5 7.5 — VPIN7 = VCC, TA = 25°C 4
Current-limit sense voltage VIpk 250 300 350 mV Idischg = Ichg, TA = 25°C 4
Saturation voltage – Darlington connection VCE(sat) 1 1.3 V ISW = 1 A, pins 1 and 8 connected, TA = full operating range 5
Saturation voltage – non-Darlington connection VCE(sat) 0.45 0.7 V ISW = 1 A, RPIN8 = 82 Ω to VCC, forced β ∼ 20, TA = full operating range 5
DC current gain hFE 50 75 — ISW = 1 A, VCE = 5 V, TA = 25°C 5
Collector off-state current IC(off) 0.01 100 μA VCE = 40 V, TA = full operating range 5
Threshold voltage Vth 1.225 1.25 1.275 V VCC = 5 V, TA = 25°C 5
Threshold voltage Vth 1.21 1.29 V VCC = 5 V, TA = full operating range 5
Threshold-voltage line regulation ΔVth 1.4 5 mV VCC = 5 V to 40 V, TA = full operating range 5
Input bias current IIB -20 -400 nA VIN = 0 V, TA = full operating range 5
Supply current ICC 4 mA VCC = 5 V to 40 V, CT = 1 nF, VPIN7 = VCC, VPIN5 > Vth, VPIN2 = GND, All other pins open, TA = full operating range 5
Junction-to-ambient thermal resistance (D package) RθJA 97 °C/W D package (8 pins) 4

CAD (KiCad official)

  • Symbol: MC34063AD
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mc34063ad-etched.step / mc34063ad-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc34063ad.step / mc34063ad.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 bad86a3b68c35766, retrieved 2026-10-03, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF