Generated by kicad-footprint-generator · KiCad file format 20260206
MC3403DR
Texas Instruments · Operational Amplifier · SOIC-14
MC3403DR from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Op-Amp 1 output that swings from VCC- to VCC+ - 1.5V. |
| 2 | 1IN- | input | Op-Amp 1 inverting input with common-mode input range VCC- to VCC+ - 2V. |
| 3 | 1IN+ | input | Op-Amp 1 non-inverting input with common-mode input range VCC- to VCC+ - 2V. |
| 4 | VCC+ | power_in | Positive supply voltage ranging from 5V to 30V in single supply mode or 2.5V to 15V in dual supply mode. |
| 5 | 2IN+ | input | Op-Amp 2 non-inverting input with common-mode input range VCC- to VCC+ - 2V. |
| 6 | 2IN- | input | Op-Amp 2 inverting input with common-mode input range VCC- to VCC+ - 2V. |
| 7 | 2OUT | output | Op-Amp 2 output that swings from VCC- to VCC+ - 1.5V. |
| 8 | 3OUT | output | Op-Amp 3 output that swings from VCC- to VCC+ - 1.5V. |
| 9 | 3IN- | input | Op-Amp 3 inverting input with common-mode input range VCC- to VCC+ - 2V. |
| 10 | 3IN+ | input | Op-Amp 3 non-inverting input with common-mode input range VCC- to VCC+ - 2V. |
| 11 | VCC- | power_in | Negative supply voltage at ground for single supply operation or -2.5V to -15V for dual supply operation. |
| 12 | 4IN+ | input | Op-Amp 4 non-inverting input with common-mode input range VCC- to VCC+ - 2V. |
| 13 | 4IN- | input | Op-Amp 4 inverting input with common-mode input range VCC- to VCC+ - 2V. |
| 14 | 4OUT | output | Op-Amp 4 output that swings from VCC- to VCC+ - 1.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-14 |
| Category | Amplifiers/Comparators |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 5 | 30 | V | 3 | ||
| Dual supply voltage VCC+ | VCC+ | 2.5 | 15 | V | 3 | ||
| Dual supply voltage VCC– | VCC– | -2.5 | -15 | V | 3 | ||
| Operating free-air temperature (MC3403) | TA | 0 | 70 | °C | MC3403 | 3 | |
| Supply voltage VCC+ | VCC+ | 18 | V | 2 | |||
| Supply voltage VCC– | VCC– | -18 | V | 2 | |||
| Supply voltage, VCC+ with respect to VCC– | VCC+ – VCC– | 36 | V | 2 | |||
| Differential input voltage | VID | -36 | 36 | V | 2 | ||
| Input voltage | VI | -18 | 18 | V | 2 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds | 260 | °C | 1,6 mm (1/16 inch) from case for 10 seconds | 2 | |||
| Package thermal impedance, D package | θJA | 86 | °C/W | D package, JESD 51-7 | 2 | ||
| Input offset voltage, 25°C | VIO | 2 | 10 | mV | 25°C; See Note 5 | 3 | |
| Input offset voltage, full range | VIO | 12 | mV | Full range; See Note 5 | 3 | ||
| Input offset current, 25°C | IIO | 30 | 50 | nA | 25°C; See Note 5 | 3 | |
| Input offset current, full range | IIO | 200 | nA | Full range; See Note 5 | 3 | ||
| Input bias current, 25°C | IIB | -0.2 | -0.5 | µA | 25°C; See Note 5 | 3 | |
| Input bias current, full range | IIB | -0.8 | µA | Full range; See Note 5 | 3 | ||
| Peak output voltage swing, RL = 10 kΩ | VOM | -12 | 13.5 | V | RL = 10 kΩ, 25°C | 3 | |
| Peak output voltage swing, RL = 2 kΩ, 25°C | VOM | -10 | 13 | V | RL = 2 kΩ, 25°C | 3 | |
| Peak output voltage swing, RL = 2 kΩ, full range | VOM | -10 | V | RL = 2 kΩ, Full range | 3 | ||
| Large-signal differential voltage amplification, 25°C | AVD | 20 | 200 | V/mV | VO = ±10 V, RL = 2 kΩ, 25°C | 3 | |
| Large-signal differential voltage amplification, full range | AVD | 15 | V/mV | VO = ±10 V, RL = 2 kΩ, Full range | 3 | ||
| Input resistance | ri | 0.3 | 1 | MΩ | f = 20 Hz, 25°C | 3 | |
| Common-mode rejection ratio | CMRR | 70 | 90 | dB | VIC = VICRmin, 25°C | 3 | |
| Supply voltage sensitivity | kSVS | 30 | 150 | µV/V | VCC± = ±2.5 to ±15 V, 25°C | 3 | |
| Short-circuit output current | IOS | -10 | 30 | 45 | mA | 25°C | 3 |
| Total supply current, 14 V | ICC | 2.8 | 7 | mA | No load, See Note 5, 25°C | 3 | |
| Input offset voltage, VO = 2.5 V, VCC+ = 5 V | VIO | 2 | 10 | mV | VO = 2.5 V | 4 | |
| Input offset current, VO = 2.5 V, VCC+ = 5 V | IIO | 30 | 50 | nA | VO = 2.5 V | 4 | |
| Input bias current, VO = 2.5 V, VCC+ = 5 V | IIB | -0.2 | -0.5 | µA | VO = 2.5 V | 4 | |
| Peak output voltage swing, VCC+ = 5 V, RL = 10 kΩ | VOM | 3.3 | 3.5 | V | RL = 10 kΩ | 4 | |
| Large-signal differential voltage amplification, VCC+ = 5 V | AVD | 20 | 200 | V/mV | VO = 1.7 V to 3.3 V, RL = 2 kΩ | 4 | |
| Supply-voltage sensitivity, 5 V table | kSVS | 150 | µV/V | VCC± = ±2.5 V to ±15 V | 4 | ||
| Supply current, VCC+ = 5 V | ICC | 2.5 | 7 | mA | VO = 2.5 V, No load | 4 |
CAD (KiCad official)
- Symbol:
MC3403DR - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
mc3403dr-etched.step/mc3403dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc3403dr.step/mc3403dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (20 pp, sha256
9a43ac2441e71918, retrieved 2026-09-22, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).