3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMC33171DT
STMicroelectronics · Operational Amplifier · SOP-8
MC33171DT from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Offset Null 1 | passive | Offset null terminal for input offset voltage trim, connected with Offset Null 2 across a 10 kΩ potentiometer whose wiper goes to VCC-. |
| 2 | Inverting Input | input | Inverting input; input voltage must not exceed the magnitude of VCC and common-mode range is VCC- to (VCC+ - 1.8 V) typical at 25°C. |
| 3 | Non-inverting Input | input | Non-inverting input; input voltage must not exceed the magnitude of VCC and common-mode range is VCC- to (VCC+ - 1.8 V) typical at 25°C. |
| 4 | VCC- | power_in | Negative supply (ground in single-supply use); total supply range is ±2 V to ±22 V (+4 V to +44 V single supply). |
| 5 | Offset Null 2 | passive | Offset null terminal for input offset voltage trim, connected with Offset Null 1 across a 10 kΩ potentiometer whose wiper goes to VCC-. |
| 6 | Output | output | Op-amp output with short-circuit protection of indefinite duration and low-level output typically 100 mV from VCC-. |
| 7 | VCC+ | power_in | Positive supply; total supply range is ±2 V to ±22 V (+4 V to +44 V single supply), maximum ±22 V. |
| 8 | N.C. | unconnected | No internal connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (VCC+=+15V, VCC-=-15V) | Vio | 1 | 4.5 | mV | VCC+ = +15V, VCC- = -15V, Vic = 0V | 3 | |
| Input Offset Voltage (VCC+=5V, VCC-=0V) | Vio | 1 | 5 | mV | VCC+ = 5V, VCC- = 0V, Vic = 0V, Vo = 1.4V | 3 | |
| Input Offset Voltage (over temperature) | Vio | 6.5 | mV | VCC+ = +15V, VCC- = -15V, Vic = 0V, Tmin. ≤ Tamb ≤ Tmax. | 3 | ||
| Input Offset Current | Iio | 5 | 20 | nA | Vic = 0V | 3 | |
| Input Offset Current (over temperature) | Iio | 40 | nA | Vic = 0V, Tmin. ≤ Tamb ≤ Tmax. | 3 | ||
| Input Bias Current | Iib | 20 | 100 | nA | Vic = 0V | 3 | |
| Input Bias Current (over temperature) | Iib | 200 | nA | Vic = 0V, Tmin. ≤ Tamb ≤ Tmax. | 3 | ||
| Large Signal Voltage Gain | Avd | 50 | 100 | V/mV | RL = 10kΩ, Vo = ±10V | 3 | |
| Large Signal Voltage Gain (over temperature) | Avd | 25 | V/mV | RL = 10kΩ, Vo = ±10V, Tmin. ≤ Tamb ≤ Tmax. | 3 | ||
| High Level Output Voltage (VCC+=5V, VCC-=0V) | VOH | 3.5 | 4.2 | V | VCC+ = 5V, VCC- = 0V, RL = 10kΩ | 3 | |
| High Level Output Voltage (VCC+=+15V, VCC-=-15V) | VOH | 13.6 | 14.2 | V | VCC+ = +15V, VCC- = -15V, RL = 10kΩ | 3 | |
| High Level Output Voltage (over temperature) | VOH | 13.3 | V | VCC+ = +15V, VCC- = -15V, RL = 10kΩ, Tmin. ≤ Tamb ≤ Tmax. | 3 | ||
| Low Level Output Voltage (VCC+=5V, VCC-=0V) | VOL | 0.1 | 0.15 | V | VCC+ = 5V, VCC- = 0V, RL = 10kΩ | 3 | |
| Low Level Output Voltage (VCC+=+15V, VCC-=-15V) | VOL | -14 | -13.6 | V | VCC+ = +15V, VCC- = -15V, RL = 10kΩ | 3 | |
| Low Level Output Voltage (over temperature) | VOL | -13.3 | V | VCC+ = +15V, VCC- = -15V, RL = 10kΩ, Tmin. ≤ Tamb ≤ Tmax. | 3 | ||
| Output Short Circuit Current, Source | Isc | 3 | 6 | mA | Vid = ±1V, Vo = 0V | 3 | |
| Output Short Circuit Current, Sink | Isc | 15 | 27 | mA | Vid = ±1V, Vo = 0V | 3 | |
| Common-mode Rejection Ratio | CMR | 80 | 100 | dB | Vic = Vicm min. | 3 | |
| Supply Voltage Rejection Ratio | SVR | 80 | 100 | dB | VCC = ±5 to ±15V | 3 | |
| Supply Current (VCC+=5V, VCC-=0V) | ICC | 200 | 250 | µA | VCC+ = 5V, VCC- = 0V, no load | 3 | |
| Supply Current (VCC+=+15V, VCC-=-15V) | ICC | 220 | 250 | µA | VCC+ = +15V, VCC- = -15V, no load | 3 | |
| Supply Current (over temperature) | ICC | 300 | µA | VCC+ = +15V, VCC- = -15V no load, Tmin. ≤ Tamb ≤ Tmax. | 3 | ||
| Slew Rate | SR | 1.6 | 2 | V/µs | Vi = ±10V, RL = 10kΩ, CL = 100pF | 3 | |
| Gain Bandwidth Product | GBP | 1.4 | 2.1 | MHz | RL = 10kΩ, CL = 100pF, f = 100kHz | 3 | |
| Supply Voltage (recommended operating) | VCC | 2 | 22 | V | Printed as ±2 to ±22 V (supply magnitude, VCC+ to VCC-) | 2 | |
| Supply Voltage (absolute maximum) | VCC | 22 | V | Printed as ±22 V | 2 | ||
| Operating Free-Air Temperature Range (MC33171) | Toper | -40 | 105 | °C | MC33171 range | 2 | |
| Junction Temperature | Tj | 150 | °C | 2 | |||
| Storage Temperature | Tstg | -65 | 150 | °C | 2 | ||
| Input Offset Voltage Drift | DVio | 10 | µV/°C | 3 | |||
| Phase Margin | φm | 45 | Degrees | RL = 10kΩ, CL = 100pF | 3 | ||
| Equivalent Input Noise Voltage | en | 29 | nV/√Hz | f = 1kHz | 3 | ||
| Total Harmonic Distortion | THD | 0.05 | % | 3 |
CAD (KiCad official)
- Symbol:
MC33171DT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mc33171dt-etched.step/mc33171dt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc33171dt.step/mc33171dt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (5 pp, sha256
022dfab3a2ba6e41, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).