Generated by kicad-footprint-generator · KiCad file format 20260206
MC33153PG
onsemi · Gate Drive ICs · PDIP-8
MC33153PG from onsemi, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Current Sense Input | input | Overcurrent and short circuit sense input referenced to Kelvin GND, whose comparator thresholds are 65 mV and 130 mV typical, and it must be biased above those thresholds, for example by connecting it to VCC. |
| 2 | Kelvin GND | power_in | Kelvin ground reference for the sense and desaturation comparators, which must always be between VEE and VCC. |
| 3 | VEE | power_in | Negative supply and gate-drive reference pin; separate VEE and Kelvin GND pins permit operation from a +15/-5.0 V supply. |
| 4 | Input | input | Inverting logic input that may be driven directly from 5.0 V CMOS logic, a microcontroller, or an optoisolator with a pullup resistor. |
| 5 | Drive Output | output | Bipolar totem-pole gate drive output that sources 1.0 A and sinks 2.0 A peak, with a pull-down resistor that keeps the IGBT off when VCC is insufficient. |
| 6 | VCC | power_in | Positive supply pin, with VCC to VEE rated at a maximum of 20 V and UVLO startup at about 12 V and disable at about 11 V. |
| 7 | Fault Output | output | Active high fault output that reports latched overcurrent or short circuit faults, rated at 25 mA source and 10 mA sink. |
| 8 | Fault Blanking/Desaturation Input | input | Desaturation comparator input with a 6.5 V threshold; fault blanking is disabled by leaving the pin unconnected. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | PDIP-8 |
| Category | Power Management ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage VCC to VEE | VCC − VEE | 20 | V | 2 | |||
| Gate Drive Output Source Current | IO | 1 | A | 2 | |||
| Gate Drive Output Sink Current | IO | 2 | A | 2 | |||
| Diode Clamp Current | 1 | A | 2 | ||||
| Fault Output Source Current | IFO | 25 | mA | 2 | |||
| Fault Output Sink Current | IFO | 10 | mA | 2 | |||
| Operating Junction Temperature | TJ | 150 | °C | 2 | |||
| Operating Ambient Temperature | TA | -40 | 105 | °C | MC33153PG | 2 | |
| Storage Temperature Range | Tstg | -65 | 150 | °C | 2 | ||
| Logic Input Voltage | Vin | -0.3 | V | VEE −0.3 V to VCC; upper limit VCC | 2 | ||
| Current Sense Input Voltage | VS | -0.3 | V | VS −0.3 V to VCC; upper limit VCC | 2 | ||
| Blanking/Desaturation Input Voltage | VBD | -0.3 | V | VBD −0.3 V to VCC; upper limit VCC | 2 | ||
| ESD Human Body Model | ESD | 2500 | V | HBM per JESD22-A114-F | 2 | ||
| ESD Machine Model | ESD | 250 | V | MM per JESD22-A115-A | 2 | ||
| ESD Charged Device Model | ESD | 1500 | V | CDM per JESD22-C101D | 2 | ||
| Maximum Power Dissipation (P Suffix DIP-8) | PD | 1 | W | P suffix DIP-8, TA = 50°C | 2 | ||
| Thermal Resistance, Junction-to-Air (P Suffix DIP-8) | RJA | 100 | °C/W | P suffix DIP-8, junction-to-air | 2 | ||
| Input Threshold Voltage High State (Logic 1) | VIH | 2.3 | 2.7 | 3.2 | V | High state (Logic 1) | 2 |
| Input Threshold Voltage Low State (Logic 0) | VIL | 1.2 | V | Low state (Logic 0) | 2 | ||
| Input Current High State | IIH | 130 | 500 | µA | VIH = 3.0 V | 2 | |
| Input Current Low State | IIL | 50 | 100 | µA | VIL = 1.2 V | 2 | |
| Drive Output Voltage Low State | VOL | 2 | V | ISink = 1.0 A | 2 | ||
| Drive Output Voltage High State | VOH | 12 | 13.9 | V | ISource = 500 mA | 2 | |
| Output Pull-Down Resistor | RPD | 100 | 200 | k | 2 | ||
| Fault Output Voltage Low State | VFL | 0.2 | V | ISink = 5.0 mA | 2 | ||
| Fault Output Voltage High State | VFH | 12 | 13.3 | V | ISource = 20 mA | 2 | |
| Propagation Delay Logic Input to Drive Output Rise | tPLH(in/out) | 80 | 300 | ns | 50% input to 50% output, CL = 1.0 nF | 3 | |
| Propagation Delay Logic Input to Drive Output Fall | tPHL(in/out) | 120 | 300 | ns | 50% input to 50% output, CL = 1.0 nF | 3 | |
| Drive Output Rise Time (10% to 90%) | tr | 17 | 55 | ns | CL = 1.0 nF | 3 | |
| Drive Output Fall Time (90% to 10%) | tf | 17 | 55 | ns | CL = 1.0 nF | 3 | |
| Propagation Delay Current Sense Input to Drive Output | tP(OC) | 0.3 | 1 | s | 3 | ||
| UVLO Startup Voltage | VCC start | 11.3 | 12 | 12.6 | V | 3 | |
| UVLO Disable Voltage | VCC dis | 10.4 | 11 | 11.7 | V | 3 | |
| Overcurrent Threshold Voltage | VSOC | 50 | 65 | 80 | mV | VPin8 > 7.0 V | 3 |
| Short Circuit Threshold Voltage | VSSC | 100 | 130 | 160 | mV | VPin8 > 7.0 V | 3 |
| Fault Blanking/Desaturation Threshold | Vth(FLT) | 6 | 6.5 | 7 | V | VPin1 > 100 mV | 3 |
| Current Sense Input Current | ISI | -1.4 | -10 | A | VSI = 0 V | 3 | |
| Current Source | Ichg | -200 | -270 | -300 | A | VPin8 = 0 V, VPin4 = 0 V | 3 |
| Discharge Current | Idschg | 1 | 2.5 | mA | VPin8 = 15 V, VPin4 = 5.0 V | 3 | |
| Power Supply Current Standby | ICC | 7.2 | 14 | mA | VPin4 = VCC, output open | 3 | |
| Power Supply Current Operating | ICC | 7.9 | 20 | mA | CL = 1.0 nF, f = 20 kHz | 3 |
CAD (KiCad official)
- Symbol:
MC33153PG - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
mc33153pg-etched.step/mc33153pg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc33153pg.step/mc33153pg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (14 pp, sha256
8207274713f8ae94, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).