component

MC33078DR2G

Public Made by Adom

by adom

onsemi Operational Amplifier, SOIC-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentop-amp-cmpmc33078dr2g
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs mc33078dr2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
mc33078dr2g-etched.fit.json mc33078dr2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mc33078dr2g-etched.glb mc33078dr2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mc33078dr2g-etched.step mc33078dr2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
mc33078dr2g.glb Publish 0.1.0 · Ray
mc33078dr2g.kicad_mod Publish 0.1.0 · Ray
mc33078dr2g.kicad_sym Publish 0.1.0 · Ray
mc33078dr2g.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
mc33078dr2g.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json mc33078dr2g: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md mc33078dr2g: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

MC33078DR2G

onsemi · Operational Amplifier · SOIC-8

MC33078DR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of amplifier 1. Class-AB bipolar output stage capable of ±14.1 V swing into 10 kΩ, source ~+29 mA / sink ~-37 mA short-circuit current at ±15 V supplies.
2 IN1- input Inverting input of amplifier 1. Typical input bias current 300 nA, input offset current 25 nA, differential input resistance 175 kΩ. ESD-protected via input diodes.
3 IN1+ input Non-inverting input of amplifier 1. Common-mode input voltage range typ ±14 V with ±15 V supplies. ESD-protected via input diodes.
4 VEE power_in Negative supply rail. Operating range from -5 V to -18 V for dual-supply operation; total VCC-to-VEE must not exceed 36 V. Typical quiescent supply current 4.1 mA.
5 IN2+ input Non-inverting input of amplifier 2. Common-mode input voltage range typ ±14 V with ±15 V supplies. ESD-protected via input diodes.
6 IN2- input Inverting input of amplifier 2. Typical input bias current 300 nA, input offset current 25 nA, differential input resistance 175 kΩ. ESD-protected via input diodes.
7 OUT2 output Output of amplifier 2. Class-AB bipolar output stage capable of ±14.1 V swing into 10 kΩ, source ~+29 mA / sink ~-37 mA short-circuit current at ±15 V supplies.
8 VCC power_in Positive supply rail. Operating range from +5 V to +18 V for dual-supply operation; total VCC-to-VEE must not exceed 36 V. Typical quiescent supply current 4.1 mA.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • MC33078DR2G
  • MC33078DR2GDG
  • MC33078DR2GPG

CAD (KiCad official)

  • Symbol: MC33078DR2G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mc33078dr2g-etched.step / mc33078dr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc33078dr2g.step / mc33078dr2g.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
mc33078dr2g.step 122 KB You want the bare part, or you mark your own boards.
mc33078dr2g-etched.step 2.7 MB You want the part with MC33078DR2G already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 636 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (14 pp, sha256 cbd703eb960e30c5, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF