Generated by kicad-footprint-generator · KiCad file format 20260206
MC33063ADR2G-HXY
HXY MOSFET · DC-DC Converters · SOP-8
MC33063ADR2G-HXY from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SC | output | Switch collector of the internal output switch; the datasheet rates the switch collector voltage at 40 V maximum and the switch current ISW at 1.5 A. |
| 2 | SE | passive | Switch emitter of the internal output switch; the datasheet rates the switch emitter voltage at 40 V (with VPin1 = 40 V). |
| 3 | CT | passive | Timing capacitor pin that sets the oscillator frequency; the datasheet gives fosc = 33 kHz typical with CT = 1.0 nF and Vpin5 = 0 V at Ta = 25 °C. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | FB | input | Comparator inverting input tied to the 1.25 V internal reference (threshold 1.21 V to 1.29 V over 0 to 70 °C); the comparator input voltage range is -0.3 V to 40 V. |
| 6 | VCC | power_in | Input supply voltage; the datasheet states operation from 3.0 V to 40 V with a 40 V maximum power supply voltage rating. |
| 7 | Ipk | input | Peak current sense input for the current limit circuit; the current limit sense voltage is 250 mA minimum, 300 mA typical and 350 mA maximum. |
| 8 | DC | output | Driver collector of the internal drive transistor; the datasheet rates the driver collector voltage at 40 V maximum and the driver collector current at 100 mA maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | Vcc | 40 | V | 2 | |||
| Comparator Input Voltage Range | VIR | -0.3 | 40 | V | 2 | ||
| Switch Collector Voltage | Vc(switch) | 40 | V | 2 | |||
| Switch Emitter Voltage | VE(switch) | 40 | V | VPin1=40V | 2 | ||
| Switch Collector to Emitter Voltage | VCE(switch) | 40 | V | 2 | |||
| Driver Collector Voltage | Vc(drive) | 40 | V | 2 | |||
| Driver Collector Current | Ic(drive) | 100 | mA | 2 | |||
| Switch Current | ISW | 1.5 | A | 2 | |||
| Power Dissipation, SOP-8(SOIC-8) | PD | 625 | mW | 2 | |||
| Operating Ambient Temperature Range | Ta | 0 | 70 | ℃ | 2 | ||
| Storage Temperature Range | Tstg | -65 | 150 | ℃ | 2 | ||
| Operating Input Voltage | Vcc | 3 | 40 | V | Operation from 3.0V to 40V input (Features) | 1 | |
| Frequency | fosc | 24 | 33 | 42 | kHz | Vpin5=0V, CT=1.0nF, Ta=25°C | 3 |
| Charge Current | Ichg | 24 | 35 | 42 | μA | Vcc=5.0~40V, Ta=25°C | 3 |
| Discharge Current | Idischg | 140 | 220 | 260 | μA | Vcc=5.0~40V, Ta=25°C | 3 |
| Discharge to Charge Current Ratio | Idischg/Ichg | 5.2 | 6.5 | 7.5 | Pin7 to Vcc, Ta=25°C | 3 | |
| Current Limit Sense Voltage | Vipk(sense) | 250 | 300 | 350 | mA | Ichg=Idischg, Ta=25°C | 3 |
| Saturation Voltage, Darlington Connection (Pins 1,8 connected) | VCE(sat) | 1 | 1.3 | V | ISW=1.0A, Pins 1,8 Connected | 3 | |
| Saturation Voltage, Darlington Connection (Rpin 8=82Ω to Vcc) | VCE(sat) | 0.45 | 0.7 | V | ISW=1.0A, Rpin 8=82Ω to Vcc, Forced β ≈ 20 | 3 | |
| DC Current Gain | hFE | 50 | 75 | ISW=1.0A,VCE=5.0V, Ta=25°C | 3 | ||
| Collector Off-State Current | Ic(off) | 0.01 | 100 | μA | VCE=40V | 3 | |
| Threshold Voltage (Ta=25°C) | 1.225 | 1.25 | 1.275 | V | Ta=25°C | 3 | |
| Threshold Voltage (Ta=0~70°C) | Vth | 1.21 | 1.29 | V | Ta=0~70°C | 3 | |
| Threshold Voltage Line Regulation | Regline | 1.4 | 5 | mV | Vcc=3.0~40V | 3 | |
| Input Bias Current | IIB | -20 | -400 | nA | Vin=0V | 3 | |
| Supply Current | Icc | 4 | mA | Vcc=5.0~40V, CT=1.0nF, Pin7=Vcc, Vpin5>Vth, pin2=Gnd, Remaining Pins Open | 3 |
CAD (KiCad official)
- Symbol:
MC33063ADR2G-HXY - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mc33063adr2g-hxy-etched.step/mc33063adr2g-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc33063adr2g-hxy.step/mc33063adr2g-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (10 pp, sha256
aeb8a5ff74dbe542, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).