3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMC33063AD
Texas Instruments · DC-DC Converters · SOIC-8
MC33063AD from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Switch Collector | output | High-current internal switch collector output; maximum voltage 40 V. |
| 2 | Switch Emitter | output | High-current internal switch emitter output; saturation voltage 0.7 V typical at 1 A. |
| 3 | Timing Capacitor | passive | External timing capacitor connection to set oscillator frequency; 1 nF typical yields 33 kHz. |
| 4 | GND | power_in | Ground reference. |
| 5 | Comparator Inverting Input | input | Feedback input for voltage regulation; attach to resistor divider network to create feedback loop. |
| 6 | VCC | power_in | Logic supply voltage input, 3 V to 40 V; tie to VIN. |
| 7 | IPK | input | Current-limit sense input; threshold voltage 250 to 350 mV. |
| 8 | Driver Collector | output | Driver output stage collector connection; used to drive external Darlington pair base. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Oscillator frequency | fosc | 24 | 33 | 42 | kHz | VPIN5 = 0 V, CT = 1 nF; TA = 25°C | 4 |
| Charge current | Ichg | 24 | 35 | 42 | µA | VCC = 5 V to 40 V; TA = 25°C | 4 |
| Discharge current | Idischg | 140 | 220 | 260 | µA | VCC = 5 V to 40 V; TA = 25°C | 4 |
| Discharge-to-charge current ratio | Idischg/Ichg | 5.2 | 6.5 | 7.5 | — | VPIN7 = VCC; TA = 25°C | 4 |
| Current-limit sense voltage | VIpk | 250 | 300 | 350 | mV | Idischg = Ichg; TA = 25°C | 4 |
| Saturation voltage, Darlington connection | VCE(sat) | 1 | 1.3 | V | ISW = 1 A, pins 1 and 8 connected; TA = Full range | 5 | |
| Saturation voltage, non-Darlington connection | VCE(sat) | 0.45 | 0.7 | V | ISW = 1 A, RPIN8 = 82 Ω to VCC, forced β ∼ 20; TA = Full range | 5 | |
| DC current gain | hFE | 50 | 75 | — | ISW = 1 A, VCE = 5 V; TA = 25°C | 5 | |
| Collector off-state current | IC(off) | 0.01 | 100 | µA | VCE = 40 V; TA = Full range | 5 | |
| Threshold voltage | Vth | 1.225 | 1.25 | 1.275 | V | TA = 25°C | 5 |
| Threshold voltage over full operating range | Vth | 1.21 | 1.29 | V | TA = Full range | 5 | |
| Threshold-voltage line regulation | ΔVth | 1.4 | 5 | mV | VCC = 5 V to 40 V; TA = Full range | 5 | |
| Input bias current | IIB | -20 | -400 | nA | VIN = 0 V; TA = Full range | 5 | |
| Supply current | ICC | 4 | mA | VCC = 5 V to 40 V, CT = 1 nF, VPIN7 = VCC, VPIN5 > Vth, VPIN2 = GND, All other pins open; TA = Full range | 5 | ||
| Supply voltage | VCC | 3 | 40 | V | 4 | ||
| Operating free-air temperature (MC33063A) | TA | -40 | 85 | °C | MC33063A | 4 | |
| Supply voltage | VCC | 40 | V | 4 | |||
| Comparator inverting input voltage range | VIR | -0.3 | 40 | V | 4 | ||
| Switch collector voltage | VC(switch) | 40 | V | 4 | |||
| Switch emitter voltage | VE(switch) | 40 | V | VPIN1 = 40 V | 4 | ||
| Switch collector to switch emitter voltage | VCE(switch) | 40 | V | 4 | |||
| Driver collector voltage | VC(driver) | 40 | V | 4 | |||
| Driver collector current | IC(driver) | 100 | mA | 4 | |||
| Switch current | ISW | 1.5 | A | 4 | |||
| Operating virtual junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance (D package, SOIC-8) | RθJA | 97 | °C/W | D package | 4 |
CAD (KiCad official)
- Symbol:
MC33063AD - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mc33063ad-etched.step/mc33063ad-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc33063ad.step/mc33063ad.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
bad86a3b68c35766, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).