← Commit history

Initial commit: component/mc14541bdr2g

Ray ·598d39a9b6 ·
2 files changed +227
README.mdadded+50
@@ -0,0 +1,50 @@+# MC14541BDR2G++**onsemi** · Timers / Counters · SOIC-14++MC14541BDR2G from onsemi, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | Rtc | passive | External resistor for RC oscillator timing network; recommended 56 kΩ with Ctc = 1000 pF per Figure 3. |+| 2 | Ctc | passive | External capacitor for RC oscillator timing network; recommended 1000 pF with Rtc = 56 kΩ per Figure 3. |+| 3 | RS | passive | Series resistor for oscillator biasing; minimum 10 kΩ, recommended ≈ 2 × Rtc per Figure 3. |+| 4 | NC | unconnected | No connection. |+| 5 | AR | input | Automatic reset control input; logic 0 enables automatic power-on reset for supply range 3.0-18 Vdc, logic 1 disables auto reset for 8.5-18 Vdc low-power operation. |+| 6 | MR | input | Master reset input; logic 1 pulse (300-900 ns minimum width depending on VDD) resets all counter stages synchronously independent of automatic reset state. |+| 7 | VSS | power_in | Ground return, negative supply reference (0 Vdc). |+| 8 | Q | output | Programmable timer output; frequency determined by A and B select inputs, output level determined by Q/Q SEL pin, VOL ≤ 0.05 Vdc and VOH ≥ (VDD − 0.05) Vdc. |+| 9 | Q/Q SEL | input | Output level selection input; logic 0 sets Q output low after reset, logic 1 sets Q output high after reset. |+| 10 | MODE | input | Operating mode control input; logic 0 selects single-cycle mode (output changes after 2ⁿ⁻¹ counts and remains unchanged), logic 1 selects recycle mode (output continually toggles). |+| 11 | NC | unconnected | No connection. |+| 12 | A | input | Frequency division select input A; together with pin 13 (B) selects output from 2⁸, 2¹⁰, 2¹³, or 2¹⁶ counter stage per Frequency Selection Table. |+| 13 | B | input | Frequency division select input B; together with pin 12 (A) selects output from 2⁸, 2¹⁰, 2¹³, or 2¹⁶ counter stage per Frequency Selection Table. |+| 14 | VDD | power_in | Positive supply voltage input; operating range 3.0-18 Vdc with automatic reset enabled (pin 5 = 0), or 8.5-18 Vdc with automatic reset disabled (pin 5 = 1); maximum rating +18.0 Vdc. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | onsemi |+| Package | SOIC-14 |+| Category | Clock/Timing |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `MC14541BDR2G`+- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`+- 3D model: SOIC-14 (KiCad packages3D, STEP)+- 3D model files: `mc14541bdr2g-etched.step` / `mc14541bdr2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mc14541bdr2g.step` / `mc14541bdr2g.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [onsemi datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586192610998562816) (9 pp, sha256 `f181a4975a73646b`, retrieved 2026-09-18, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/mc14541bdr2g-datasheet.pdf)
page.jsonadded+177
@@ -0,0 +1,177 @@+{+  "slug": "mc14541bdr2g",+  "version": "0.1.0",+  "type": "component",+  "description": "onsemi Timers / Counters, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "clock-timing",+    "mc14541bdr2g",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "mc14541bdr2g.kicad_sym",+    "mc14541bdr2g.kicad_mod",+    "mc14541bdr2g.glb",+    "mc14541bdr2g.step",+    "mc14541bdr2g.lbr",+    "docs/hero.png",+    "docs/mc14541bdr2g-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MC14541BDR2G",+    "manufacturer": "onsemi",+    "package": "SOIC-14",+    "pin_count": 14,+    "category": "Clock/Timing",+    "subcategory": "Timers / Counters",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586192610998562816",+    "parts": {+      "symbol": "mc14541bdr2g.kicad_sym",+      "footprint": "mc14541bdr2g.kicad_mod",+      "model_3d": "mc14541bdr2g-etched.glb",+      "model_3d_plain": "mc14541bdr2g.glb",+      "model_3d_step": "mc14541bdr2g-etched.step",+      "model_3d_step_plain": "mc14541bdr2g.step",+      "lbr": "mc14541bdr2g.lbr"+    },+    "distributor_links": {+      "lcsc": "C7292"+    },+    "pins": [+      {+        "number": "1",+        "name": "Rtc",+        "type": "passive",+        "description": "External resistor for RC oscillator timing network; recommended 56 kΩ with Ctc = 1000 pF per Figure 3."+      },+      {+        "number": "2",+        "name": "Ctc",+        "type": "passive",+        "description": "External capacitor for RC oscillator timing network; recommended 1000 pF with Rtc = 56 kΩ per Figure 3."+      },+      {+        "number": "3",+        "name": "RS",+        "type": "passive",+        "description": "Series resistor for oscillator biasing; minimum 10 kΩ, recommended ≈ 2 × Rtc per Figure 3."+      },+      {+        "number": "4",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "5",+        "name": "AR",+        "type": "input",+        "description": "Automatic reset control input; logic 0 enables automatic power-on reset for supply range 3.0-18 Vdc, logic 1 disables auto reset for 8.5-18 Vdc low-power operation."+      },+      {+        "number": "6",+        "name": "MR",+        "type": "input",+        "description": "Master reset input; logic 1 pulse (300-900 ns minimum width depending on VDD) resets all counter stages synchronously independent of automatic reset state."+      },+      {+        "number": "7",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground return, negative supply reference (0 Vdc)."+      },+      {+        "number": "8",+        "name": "Q",+        "type": "output",+        "description": "Programmable timer output; frequency determined by A and B select inputs, output level determined by Q/Q SEL pin, VOL ≤ 0.05 Vdc and VOH ≥ (VDD − 0.05) Vdc."+      },+      {+        "number": "9",+        "name": "Q/Q SEL",+        "type": "input",+        "description": "Output level selection input; logic 0 sets Q output low after reset, logic 1 sets Q output high after reset."+      },+      {+        "number": "10",+        "name": "MODE",+        "type": "input",+        "description": "Operating mode control input; logic 0 selects single-cycle mode (output changes after 2ⁿ⁻¹ counts and remains unchanged), logic 1 selects recycle mode (output continually toggles)."+      },+      {+        "number": "11",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection."+      },+      {+        "number": "12",+        "name": "A",+        "type": "input",+        "description": "Frequency division select input A; together with pin 13 (B) selects output from 2⁸, 2¹⁰, 2¹³, or 2¹⁶ counter stage per Frequency Selection Table."+      },+      {+        "number": "13",+        "name": "B",+        "type": "input",+        "description": "Frequency division select input B; together with pin 12 (A) selects output from 2⁸, 2¹⁰, 2¹³, or 2¹⁶ counter stage per Frequency Selection Table."+      },+      {+        "number": "14",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive supply voltage input; operating range 3.0-18 Vdc with automatic reset enabled (pin 5 = 0), or 8.5-18 Vdc with automatic reset disabled (pin 5 = 1); maximum rating +18.0 Vdc."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 9,+        "cost_usd": 0.369,+        "at": "2026-09-18T06:52:25"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586192610998562816",+        "pages": 9,+        "sha256": "f181a4975a73646b",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file