main
Ray
Publish 0.1.0
12da0cb
MC14526BDWR2G
onsemi · Counters / Dividers · SOIC-16-300mil
MC14526BDWR2G from onsemi, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Q3 | output | Synchronous counter output for bit 3 (MSB) of the 4-bit down counter; Q0 is the LSB. |
| 2 | P3 | input | Preset data input for bit 3 (MSB), loaded into the counter when Preset Enable is high and Reset is low. |
| 3 | PE | input | Preset Enable: when Reset is low, a high level asynchronously loads the counter with the programmed values on P0 to P3. |
| 4 | INHIBIT | input | A high level prevents the Clock from decrementing the counter; with Clock held high, Inhibit may be used as a negative edge clock input. |
| 5 | P0 | input | Preset data input for bit 0 (LSB), loaded into the counter when Preset Enable is high and Reset is low. |
| 6 | CLOCK | input | Counter decrements by one on each rising edge of Clock; Clock rise and fall times are specified at 15 µs maximum at VDD 5 V and shorter at higher supply voltages. |
| 7 | Q0 | output | Synchronous counter output for bit 0 (LSB). |
| 8 | VSS | power_in | Most negative power supply potential, usually ground; all voltages are referenced to VSS. |
| 9 | Q1 | output | Synchronous counter output for bit 1. |
| 10 | RESET | input | A high level asynchronously forces Q0 to Q3 low and, if Cascade Feedback is high, drives the "0" output high. |
| 11 | P1 | input | Preset data input for bit 1. |
| 12 | "0" | output | Zero-detect output that issues a pulse one clock period wide at terminal count (Q0 to Q3 all low) when Cascade Feedback is high and Preset Enable is low. |
| 13 | CF | input | Cascade Feedback: when high, the "0" output goes high when the count is all zeroes; when low, the "0" output depends on the Preset Enable level. |
| 14 | P2 | input | Preset data input for bit 2. |
| 15 | Q2 | output | Synchronous counter output for bit 2. |
| 16 | VDD | power_in | Most positive power supply potential; VDD may range from 3.0 to 18 V with respect to VSS (absolute maximum DC supply 18.0 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-16-300mil |
| Category | Logic ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Supply Voltage Range | VDD | -0.5 | 18 | V | 1 | ||
| Input or Output Voltage Range (DC or Transient) | Vin, Vout | -0.5 | V | Max printed as VDD + 0.5 V | 1 | ||
| Input or Output Current (DC or Transient) per Pin | Iin, Iout | -10 | 10 | mA | per pin | 1 | |
| Power Dissipation per Package | PD | 500 | mW | per package (Note 1) | 1 | ||
| Operating Temperature Range | TA | -55 | 125 | °C | 1 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 1 | ||
| Lead Temperature | TL | 260 | °C | 8-second soldering | 1 | ||
| Supply Voltage Range | VDD | 3 | 18 | V | Supply Voltage Range (Features) | 1 | |
| Output Voltage '0' Level | VOL | 0.05 | Vdc | VDD = 5.0 Vdc; Vin = VDD or 0 | 3 | ||
| Output Voltage '1' Level | VOH | 4.95 | Vdc | VDD = 5.0 Vdc; Vin = 0 or VDD | 3 | ||
| Output Voltage '1' Level | VOH | 9.95 | Vdc | VDD = 10 Vdc; Vin = 0 or VDD | 3 | ||
| Output Voltage '1' Level | VOH | 14.95 | Vdc | VDD = 15 Vdc; Vin = 0 or VDD | 3 | ||
| Input Voltage '0' Level | VIL | 1.5 | Vdc | VDD = 5.0 Vdc; VO = 4.5 or 0.5 Vdc | 3 | ||
| Input Voltage '0' Level | VIL | 3 | Vdc | VDD = 10 Vdc; VO = 9.0 or 1.0 Vdc | 3 | ||
| Input Voltage '0' Level | VIL | 4 | Vdc | VDD = 15 Vdc; VO = 13.5 or 1.5 Vdc | 3 | ||
| Input Voltage '1' Level | VIH | 3.5 | Vdc | VDD = 5.0 Vdc; VO = 0.5 or 4.5 Vdc | 3 | ||
| Input Voltage '1' Level | VIH | 7 | Vdc | VDD = 10 Vdc; VO = 1.0 or 9.0 Vdc | 3 | ||
| Input Voltage '1' Level | VIH | 11 | Vdc | VDD = 15 Vdc; VO = 1.5 or 13.5 Vdc | 3 | ||
| Output Drive Current, Source | IOH | -3 | mAdc | VDD = 5.0 Vdc; VOH = 2.5 Vdc; TA = −55°C | 3 | ||
| Output Drive Current, Source | IOH | -2.4 | -4.2 | mAdc | VDD = 5.0 Vdc; VOH = 2.5 Vdc; TA = 25°C | 3 | |
| Output Drive Current, Source | IOH | -1.7 | mAdc | VDD = 5.0 Vdc; VOH = 2.5 Vdc; TA = 125°C | 3 | ||
| Output Drive Current, Source | IOH | -0.64 | mAdc | VDD = 5.0 Vdc; VOH = 4.6 Vdc; TA = −55°C | 3 | ||
| Output Drive Current, Source | IOH | -0.51 | -0.88 | mAdc | VDD = 5.0 Vdc; VOH = 4.6 Vdc; TA = 25°C | 3 | |
| Output Drive Current, Source | IOH | -0.36 | mAdc | VDD = 5.0 Vdc; VOH = 4.6 Vdc; TA = 125°C | 3 | ||
| Output Drive Current, Source | IOH | -1.6 | mAdc | VDD = 10 Vdc; VOH = 9.5 Vdc; TA = −55°C | 3 | ||
| Output Drive Current, Source | IOH | -1.3 | -2.25 | mAdc | VDD = 10 Vdc; VOH = 9.5 Vdc; TA = 25°C | 3 | |
| Output Drive Current, Source | IOH | -0.9 | mAdc | VDD = 10 Vdc; VOH = 9.5 Vdc; TA = 125°C | 3 | ||
| Output Drive Current, Source | IOH | -4.2 | mAdc | VDD = 15 Vdc; VOH = 13.5 Vdc; TA = −55°C | 3 | ||
| Output Drive Current, Source | IOH | -3.4 | -8.8 | mAdc | VDD = 15 Vdc; VOH = 13.5 Vdc; TA = 25°C | 3 | |
| Output Drive Current, Source | IOH | -2.4 | mAdc | VDD = 15 Vdc; VOH = 13.5 Vdc; TA = 125°C | 3 | ||
| Output Drive Current, Sink | IOL | 0.64 | mAdc | VDD = 5.0 Vdc; VOL = 0.4 Vdc; TA = −55°C | 3 | ||
| Output Drive Current, Sink | IOL | 0.51 | 0.88 | mAdc | VDD = 5.0 Vdc; VOL = 0.4 Vdc; TA = 25°C | 3 | |
| Output Drive Current, Sink | IOL | 0.36 | mAdc | VDD = 5.0 Vdc; VOL = 0.4 Vdc; TA = 125°C | 3 | ||
| Output Drive Current, Sink | IOL | 1.6 | mAdc | VDD = 10 Vdc; VOL = 0.5 Vdc; TA = −55°C | 3 | ||
| Output Drive Current, Sink | IOL | 1.3 | 2.25 | mAdc | VDD = 10 Vdc; VOL = 0.5 Vdc; TA = 25°C | 3 | |
| Output Drive Current, Sink | IOL | 0.9 | mAdc | VDD = 10 Vdc; VOL = 0.5 Vdc; TA = 125°C | 3 | ||
| Output Drive Current, Sink | IOL | 4.2 | mAdc | VDD = 15 Vdc; VOL = 1.5 Vdc; TA = −55°C | 3 | ||
| Output Drive Current, Sink | IOL | 3.4 | 8.8 | mAdc | VDD = 15 Vdc; VOL = 1.5 Vdc; TA = 25°C | 3 | |
| Output Drive Current, Sink | IOL | 2.4 | mAdc | VDD = 15 Vdc; VOL = 1.5 Vdc; TA = 125°C | 3 | ||
| Input Current | Iin | -0.1 | 0.1 | Adc | VDD = 15 Vdc; TA = −55°C | 3 | |
| Input Current | Iin | -0.1 | 1e-05 | 0.1 | Adc | VDD = 15 Vdc; TA = 25°C | 3 |
| Input Current | Iin | -1 | 1 | Adc | VDD = 15 Vdc; TA = 125°C | 3 | |
| Input Capacitance | Cin | 5 | 7.5 | pF | Vin = 0 | 3 | |
| Quiescent Current (Per Package) | 5 | Adc | Per package; VDD = 5.0 Vdc; TA = −55°C | 3 | |||
| Quiescent Current (Per Package) | 0.005 | 5 | Adc | Per package; VDD = 5.0 Vdc; TA = 25°C | 3 | ||
| Quiescent Current (Per Package) | 150 | Adc | Per package; VDD = 5.0 Vdc; TA = 125°C | 3 | |||
| Quiescent Current (Per Package) | 10 | Adc | Per package; VDD = 10 Vdc; TA = −55°C | 3 | |||
| Quiescent Current (Per Package) | 0.01 | 10 | Adc | Per package; VDD = 10 Vdc; TA = 25°C | 3 | ||
| Quiescent Current (Per Package) | 300 | Adc | Per package; VDD = 10 Vdc; TA = 125°C | 3 | |||
| Quiescent Current (Per Package) | 20 | Adc | Per package; VDD = 15 Vdc; TA = −55°C | 3 | |||
| Quiescent Current (Per Package) | 0.015 | 20 | Adc | Per package; VDD = 15 Vdc; TA = 25°C | 3 | ||
| Quiescent Current (Per Package) | 600 | Adc | Per package; VDD = 15 Vdc; TA = 125°C | 3 |
CAD (KiCad official)
- Symbol:
MC14526BDWR2G - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
mc14526bdwr2g-etched.step/mc14526bdwr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc14526bdwr2g.step/mc14526bdwr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (10 pp, sha256
16dab179c6a69378, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MC14526BDWR2G
**onsemi** · Counters / Dividers · SOIC-16-300mil
MC14526BDWR2G from onsemi, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Q3 | output | Synchronous counter output for bit 3 (MSB) of the 4-bit down counter; Q0 is the LSB. |
| 2 | P3 | input | Preset data input for bit 3 (MSB), loaded into the counter when Preset Enable is high and Reset is low. |
| 3 | PE | input | Preset Enable: when Reset is low, a high level asynchronously loads the counter with the programmed values on P0 to P3. |
| 4 | INHIBIT | input | A high level prevents the Clock from decrementing the counter; with Clock held high, Inhibit may be used as a negative edge clock input. |
| 5 | P0 | input | Preset data input for bit 0 (LSB), loaded into the counter when Preset Enable is high and Reset is low. |
| 6 | CLOCK | input | Counter decrements by one on each rising edge of Clock; Clock rise and fall times are specified at 15 µs maximum at VDD 5 V and shorter at higher supply voltages. |
| 7 | Q0 | output | Synchronous counter output for bit 0 (LSB). |
| 8 | VSS | power_in | Most negative power supply potential, usually ground; all voltages are referenced to VSS. |
| 9 | Q1 | output | Synchronous counter output for bit 1. |
| 10 | RESET | input | A high level asynchronously forces Q0 to Q3 low and, if Cascade Feedback is high, drives the "0" output high. |
| 11 | P1 | input | Preset data input for bit 1. |
| 12 | "0" | output | Zero-detect output that issues a pulse one clock period wide at terminal count (Q0 to Q3 all low) when Cascade Feedback is high and Preset Enable is low. |
| 13 | CF | input | Cascade Feedback: when high, the "0" output goes high when the count is all zeroes; when low, the "0" output depends on the Preset Enable level. |
| 14 | P2 | input | Preset data input for bit 2. |
| 15 | Q2 | output | Synchronous counter output for bit 2. |
| 16 | VDD | power_in | Most positive power supply potential; VDD may range from 3.0 to 18 V with respect to VSS (absolute maximum DC supply 18.0 V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-16-300mil |
| Category | Logic ICs |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Supply Voltage Range | VDD | -0.5 | | 18 | V | | 1 |
| Input or Output Voltage Range (DC or Transient) | Vin, Vout | -0.5 | | | V | Max printed as VDD + 0.5 V | 1 |
| Input or Output Current (DC or Transient) per Pin | Iin, Iout | -10 | | 10 | mA | per pin | 1 |
| Power Dissipation per Package | PD | | | 500 | mW | per package (Note 1) | 1 |
| Operating Temperature Range | TA | -55 | | 125 | °C | | 1 |
| Storage Temperature Range | Tstg | -65 | | 150 | °C | | 1 |
| Lead Temperature | TL | | | 260 | °C | 8-second soldering | 1 |
| Supply Voltage Range | VDD | 3 | | 18 | V | Supply Voltage Range (Features) | 1 |
| Output Voltage '0' Level | VOL | | | 0.05 | Vdc | VDD = 5.0 Vdc; Vin = VDD or 0 | 3 |
| Output Voltage '1' Level | VOH | 4.95 | | | Vdc | VDD = 5.0 Vdc; Vin = 0 or VDD | 3 |
| Output Voltage '1' Level | VOH | 9.95 | | | Vdc | VDD = 10 Vdc; Vin = 0 or VDD | 3 |
| Output Voltage '1' Level | VOH | 14.95 | | | Vdc | VDD = 15 Vdc; Vin = 0 or VDD | 3 |
| Input Voltage '0' Level | VIL | | | 1.5 | Vdc | VDD = 5.0 Vdc; VO = 4.5 or 0.5 Vdc | 3 |
| Input Voltage '0' Level | VIL | | | 3 | Vdc | VDD = 10 Vdc; VO = 9.0 or 1.0 Vdc | 3 |
| Input Voltage '0' Level | VIL | | | 4 | Vdc | VDD = 15 Vdc; VO = 13.5 or 1.5 Vdc | 3 |
| Input Voltage '1' Level | VIH | 3.5 | | | Vdc | VDD = 5.0 Vdc; VO = 0.5 or 4.5 Vdc | 3 |
| Input Voltage '1' Level | VIH | 7 | | | Vdc | VDD = 10 Vdc; VO = 1.0 or 9.0 Vdc | 3 |
| Input Voltage '1' Level | VIH | 11 | | | Vdc | VDD = 15 Vdc; VO = 1.5 or 13.5 Vdc | 3 |
| Output Drive Current, Source | IOH | -3 | | | mAdc | VDD = 5.0 Vdc; VOH = 2.5 Vdc; TA = −55°C | 3 |
| Output Drive Current, Source | IOH | -2.4 | -4.2 | | mAdc | VDD = 5.0 Vdc; VOH = 2.5 Vdc; TA = 25°C | 3 |
| Output Drive Current, Source | IOH | -1.7 | | | mAdc | VDD = 5.0 Vdc; VOH = 2.5 Vdc; TA = 125°C | 3 |
| Output Drive Current, Source | IOH | -0.64 | | | mAdc | VDD = 5.0 Vdc; VOH = 4.6 Vdc; TA = −55°C | 3 |
| Output Drive Current, Source | IOH | -0.51 | -0.88 | | mAdc | VDD = 5.0 Vdc; VOH = 4.6 Vdc; TA = 25°C | 3 |
| Output Drive Current, Source | IOH | -0.36 | | | mAdc | VDD = 5.0 Vdc; VOH = 4.6 Vdc; TA = 125°C | 3 |
| Output Drive Current, Source | IOH | -1.6 | | | mAdc | VDD = 10 Vdc; VOH = 9.5 Vdc; TA = −55°C | 3 |
| Output Drive Current, Source | IOH | -1.3 | -2.25 | | mAdc | VDD = 10 Vdc; VOH = 9.5 Vdc; TA = 25°C | 3 |
| Output Drive Current, Source | IOH | -0.9 | | | mAdc | VDD = 10 Vdc; VOH = 9.5 Vdc; TA = 125°C | 3 |
| Output Drive Current, Source | IOH | -4.2 | | | mAdc | VDD = 15 Vdc; VOH = 13.5 Vdc; TA = −55°C | 3 |
| Output Drive Current, Source | IOH | -3.4 | -8.8 | | mAdc | VDD = 15 Vdc; VOH = 13.5 Vdc; TA = 25°C | 3 |
| Output Drive Current, Source | IOH | -2.4 | | | mAdc | VDD = 15 Vdc; VOH = 13.5 Vdc; TA = 125°C | 3 |
| Output Drive Current, Sink | IOL | 0.64 | | | mAdc | VDD = 5.0 Vdc; VOL = 0.4 Vdc; TA = −55°C | 3 |
| Output Drive Current, Sink | IOL | 0.51 | 0.88 | | mAdc | VDD = 5.0 Vdc; VOL = 0.4 Vdc; TA = 25°C | 3 |
| Output Drive Current, Sink | IOL | 0.36 | | | mAdc | VDD = 5.0 Vdc; VOL = 0.4 Vdc; TA = 125°C | 3 |
| Output Drive Current, Sink | IOL | 1.6 | | | mAdc | VDD = 10 Vdc; VOL = 0.5 Vdc; TA = −55°C | 3 |
| Output Drive Current, Sink | IOL | 1.3 | 2.25 | | mAdc | VDD = 10 Vdc; VOL = 0.5 Vdc; TA = 25°C | 3 |
| Output Drive Current, Sink | IOL | 0.9 | | | mAdc | VDD = 10 Vdc; VOL = 0.5 Vdc; TA = 125°C | 3 |
| Output Drive Current, Sink | IOL | 4.2 | | | mAdc | VDD = 15 Vdc; VOL = 1.5 Vdc; TA = −55°C | 3 |
| Output Drive Current, Sink | IOL | 3.4 | 8.8 | | mAdc | VDD = 15 Vdc; VOL = 1.5 Vdc; TA = 25°C | 3 |
| Output Drive Current, Sink | IOL | 2.4 | | | mAdc | VDD = 15 Vdc; VOL = 1.5 Vdc; TA = 125°C | 3 |
| Input Current | Iin | -0.1 | | 0.1 | Adc | VDD = 15 Vdc; TA = −55°C | 3 |
| Input Current | Iin | -0.1 | 1e-05 | 0.1 | Adc | VDD = 15 Vdc; TA = 25°C | 3 |
| Input Current | Iin | -1 | | 1 | Adc | VDD = 15 Vdc; TA = 125°C | 3 |
| Input Capacitance | Cin | | 5 | 7.5 | pF | Vin = 0 | 3 |
| Quiescent Current (Per Package) | | | | 5 | Adc | Per package; VDD = 5.0 Vdc; TA = −55°C | 3 |
| Quiescent Current (Per Package) | | | 0.005 | 5 | Adc | Per package; VDD = 5.0 Vdc; TA = 25°C | 3 |
| Quiescent Current (Per Package) | | | | 150 | Adc | Per package; VDD = 5.0 Vdc; TA = 125°C | 3 |
| Quiescent Current (Per Package) | | | | 10 | Adc | Per package; VDD = 10 Vdc; TA = −55°C | 3 |
| Quiescent Current (Per Package) | | | 0.01 | 10 | Adc | Per package; VDD = 10 Vdc; TA = 25°C | 3 |
| Quiescent Current (Per Package) | | | | 300 | Adc | Per package; VDD = 10 Vdc; TA = 125°C | 3 |
| Quiescent Current (Per Package) | | | | 20 | Adc | Per package; VDD = 15 Vdc; TA = −55°C | 3 |
| Quiescent Current (Per Package) | | | 0.015 | 20 | Adc | Per package; VDD = 15 Vdc; TA = 25°C | 3 |
| Quiescent Current (Per Package) | | | | 600 | Adc | Per package; VDD = 15 Vdc; TA = 125°C | 3 |
## CAD (KiCad official)
- Symbol: `MC14526BDWR2G`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `mc14526bdwr2g-etched.step` / `mc14526bdwr2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mc14526bdwr2g.step` / `mc14526bdwr2g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc14526bdwr2-d.pdf) (10 pp, sha256 `16dab179c6a69378`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mc14526bdwr2g-datasheet.pdf)