main
Ray
Publish 0.1.0
56c787b
MC14516BDR2G
onsemi · Counters / Dividers · SOIC-16-150mil
MC14516BDR2G from onsemi, in a SOIC-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE | input | Preset Enable is active high, asynchronously loads the data on the Preset inputs, and inhibits the clock when high. |
| 2 | Q3 | output | Binary counter output Q3, the most significant bit, since Q0 is the least significant bit. |
| 3 | P3 | input | Preset input whose data is loaded into the counter when PE is taken high. |
| 4 | P0 | input | Preset input whose data is loaded into the counter when PE is taken high. |
| 5 | CARRY IN | input | Active-low input used when cascading stages, usually connected to Carry Out of the previous stage, and Clock is inhibited while it is high. |
| 6 | Q0 | output | Binary counter output Q0, the least significant bit. |
| 7 | CARRY OUT | output | Synchronous active-low output used when cascading stages, usually connected to Carry In of the next stage, and may also indicate terminal count. |
| 8 | VSS | power_in | Negative supply voltage, usually connected to ground. |
| 9 | R | input | Reset is active high, asynchronously resets the Q outputs to a low state, and inhibits the clock when high. |
| 10 | U/D | input | Up/Down input controls the direction of count: high for up count, low for down count. |
| 11 | Q1 | output | Binary counter output Q1. |
| 12 | P1 | input | Preset input whose data is loaded into the counter when PE is taken high. |
| 13 | P2 | input | Preset input whose data is loaded into the counter when PE is taken high. |
| 14 | Q2 | output | Binary counter output Q2. |
| 15 | C | input | Clock input; binary data is incremented or decremented, depending on the direction of count, on its positive transition. |
| 16 | VDD | power_in | Positive supply voltage pin, connected to a positive supply ranging from 3.0 V to 18 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-16-150mil |
| Category | Logic ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Supply Voltage Range | VDD | -0.5 | 18 | V | Voltages referenced to VSS | 1 | |
| Input or Output Current (DC or Transient) per pin | Iin, Iout | -10 | 10 | mA | DC or transient, per pin | 1 | |
| Power Dissipation, per Package | PD | 500 | mW | Per package (Note 1); plastic DW packages derate 7.0 mW/°C from 65 °C to 125 °C | 1 | ||
| Ambient Temperature Range | TA | -55 | 125 | °C | 1 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 1 | ||
| Lead Temperature | TL | 260 | °C | 8-second soldering | 1 | ||
| Supply Voltage Range | VDD | 3 | 18 | Vdc | Pin description and Features: VDD range 3.0 Vdc to 18 Vdc, referenced to VSS | 1 | |
| Output Voltage 0 Level | VOL | 0.05 | Vdc | VDD=5.0 Vdc; Vin = VDD or 0 | 3 | ||
| Output Voltage 1 Level | VOH | 4.95 | Vdc | VDD=5.0 Vdc; Vin = 0 or VDD | 3 | ||
| Input Voltage 0 Level | VIL | 1.5 | Vdc | VDD=5.0 Vdc; VO = 4.5 or 0.5 Vdc | 3 | ||
| Input Voltage 0 Level | VIL | 3 | Vdc | VDD=10 Vdc; VO = 9.0 or 1.0 Vdc | 3 | ||
| Input Voltage 0 Level | VIL | 4 | Vdc | VDD=15 Vdc; VO = 13.5 or 1.5 Vdc | 3 | ||
| Input Voltage 1 Level | VIH | 3.5 | Vdc | VDD=5.0 Vdc; VO = 0.5 or 4.5 Vdc | 3 | ||
| Input Voltage 1 Level | VIH | 7 | Vdc | VDD=10 Vdc; VO = 1.0 or 9.0 Vdc | 3 | ||
| Input Voltage 1 Level | VIH | 11 | Vdc | VDD=15 Vdc; VO = 1.5 or 13.5 Vdc | 3 | ||
| Output Drive Current Source | IOH | -0.64 | mAdc | VDD=5.0 Vdc; VOH = 4.6 Vdc | 3 | ||
| Output Drive Current Sink | IOL | 0.64 | mAdc | VDD=5.0 Vdc; VOL = 0.4 Vdc | 3 | ||
| Input Current | Iin | -0.1 | 0.1 | Adc | VDD=15 Vdc; −55 °C | 3 | |
| Input Capacitance | Cin | 7.5 | pF | Vin = 0 | 3 | ||
| Quiescent Current (Per Package) | IDD | 150 | Adc | VDD=5.0 Vdc; 125 °C | 3 | ||
| Quiescent Current (Per Package) | IDD | 300 | Adc | VDD=10 Vdc; 125 °C | 3 | ||
| Quiescent Current (Per Package) | IDD | 600 | Adc | VDD=15 Vdc; 125 °C | 3 | ||
| Reset Pulse Width | tw | 380 | ns | VDD=5.0 Vdc | 4 | ||
| Reset Pulse Width | tw | 200 | ns | VDD=10 Vdc | 4 | ||
| Reset Pulse Width | tw | 160 | ns | VDD=15 Vdc | 4 | ||
| Clock Pulse Width | tWH | 350 | ns | VDD=5.0 Vdc | 4 | ||
| Clock Pulse Width | tWH | 170 | ns | VDD=10 Vdc | 4 | ||
| Clock Pulse Width | tWH | 140 | ns | VDD=15 Vdc | 4 | ||
| Clock Pulse Frequency | fcl | 1.5 | MHz | VDD=5.0 Vdc | 4 | ||
| Clock Pulse Frequency | fcl | 3 | MHz | VDD=10 Vdc | 4 | ||
| Clock Pulse Frequency | fcl | 4 | MHz | VDD=15 Vdc | 4 |
CAD (KiCad official)
- Symbol:
MC14516BDR2G - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16-150mil (KiCad packages3D, STEP)
- 3D model files:
mc14516bdr2g-etched.step/mc14516bdr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc14516bdr2g.step/mc14516bdr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (13 pp, sha256
4f4ff21408fc0ebd, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MC14516BDR2G
**onsemi** · Counters / Dividers · SOIC-16-150mil
MC14516BDR2G from onsemi, in a SOIC-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE | input | Preset Enable is active high, asynchronously loads the data on the Preset inputs, and inhibits the clock when high. |
| 2 | Q3 | output | Binary counter output Q3, the most significant bit, since Q0 is the least significant bit. |
| 3 | P3 | input | Preset input whose data is loaded into the counter when PE is taken high. |
| 4 | P0 | input | Preset input whose data is loaded into the counter when PE is taken high. |
| 5 | CARRY IN | input | Active-low input used when cascading stages, usually connected to Carry Out of the previous stage, and Clock is inhibited while it is high. |
| 6 | Q0 | output | Binary counter output Q0, the least significant bit. |
| 7 | CARRY OUT | output | Synchronous active-low output used when cascading stages, usually connected to Carry In of the next stage, and may also indicate terminal count. |
| 8 | VSS | power_in | Negative supply voltage, usually connected to ground. |
| 9 | R | input | Reset is active high, asynchronously resets the Q outputs to a low state, and inhibits the clock when high. |
| 10 | U/D | input | Up/Down input controls the direction of count: high for up count, low for down count. |
| 11 | Q1 | output | Binary counter output Q1. |
| 12 | P1 | input | Preset input whose data is loaded into the counter when PE is taken high. |
| 13 | P2 | input | Preset input whose data is loaded into the counter when PE is taken high. |
| 14 | Q2 | output | Binary counter output Q2. |
| 15 | C | input | Clock input; binary data is incremented or decremented, depending on the direction of count, on its positive transition. |
| 16 | VDD | power_in | Positive supply voltage pin, connected to a positive supply ranging from 3.0 V to 18 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-16-150mil |
| Category | Logic ICs |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Supply Voltage Range | VDD | -0.5 | | 18 | V | Voltages referenced to VSS | 1 |
| Input or Output Current (DC or Transient) per pin | Iin, Iout | -10 | | 10 | mA | DC or transient, per pin | 1 |
| Power Dissipation, per Package | PD | | | 500 | mW | Per package (Note 1); plastic DW packages derate 7.0 mW/°C from 65 °C to 125 °C | 1 |
| Ambient Temperature Range | TA | -55 | | 125 | °C | | 1 |
| Storage Temperature Range | Tstg | -65 | | 150 | °C | | 1 |
| Lead Temperature | TL | | | 260 | °C | 8-second soldering | 1 |
| Supply Voltage Range | VDD | 3 | | 18 | Vdc | Pin description and Features: VDD range 3.0 Vdc to 18 Vdc, referenced to VSS | 1 |
| Output Voltage 0 Level | VOL | | | 0.05 | Vdc | VDD=5.0 Vdc; Vin = VDD or 0 | 3 |
| Output Voltage 1 Level | VOH | 4.95 | | | Vdc | VDD=5.0 Vdc; Vin = 0 or VDD | 3 |
| Input Voltage 0 Level | VIL | | | 1.5 | Vdc | VDD=5.0 Vdc; VO = 4.5 or 0.5 Vdc | 3 |
| Input Voltage 0 Level | VIL | | | 3 | Vdc | VDD=10 Vdc; VO = 9.0 or 1.0 Vdc | 3 |
| Input Voltage 0 Level | VIL | | | 4 | Vdc | VDD=15 Vdc; VO = 13.5 or 1.5 Vdc | 3 |
| Input Voltage 1 Level | VIH | 3.5 | | | Vdc | VDD=5.0 Vdc; VO = 0.5 or 4.5 Vdc | 3 |
| Input Voltage 1 Level | VIH | 7 | | | Vdc | VDD=10 Vdc; VO = 1.0 or 9.0 Vdc | 3 |
| Input Voltage 1 Level | VIH | 11 | | | Vdc | VDD=15 Vdc; VO = 1.5 or 13.5 Vdc | 3 |
| Output Drive Current Source | IOH | -0.64 | | | mAdc | VDD=5.0 Vdc; VOH = 4.6 Vdc | 3 |
| Output Drive Current Sink | IOL | 0.64 | | | mAdc | VDD=5.0 Vdc; VOL = 0.4 Vdc | 3 |
| Input Current | Iin | -0.1 | | 0.1 | Adc | VDD=15 Vdc; −55 °C | 3 |
| Input Capacitance | Cin | | | 7.5 | pF | Vin = 0 | 3 |
| Quiescent Current (Per Package) | IDD | | | 150 | Adc | VDD=5.0 Vdc; 125 °C | 3 |
| Quiescent Current (Per Package) | IDD | | | 300 | Adc | VDD=10 Vdc; 125 °C | 3 |
| Quiescent Current (Per Package) | IDD | | | 600 | Adc | VDD=15 Vdc; 125 °C | 3 |
| Reset Pulse Width | tw | 380 | | | ns | VDD=5.0 Vdc | 4 |
| Reset Pulse Width | tw | 200 | | | ns | VDD=10 Vdc | 4 |
| Reset Pulse Width | tw | 160 | | | ns | VDD=15 Vdc | 4 |
| Clock Pulse Width | tWH | 350 | | | ns | VDD=5.0 Vdc | 4 |
| Clock Pulse Width | tWH | 170 | | | ns | VDD=10 Vdc | 4 |
| Clock Pulse Width | tWH | 140 | | | ns | VDD=15 Vdc | 4 |
| Clock Pulse Frequency | fcl | | | 1.5 | MHz | VDD=5.0 Vdc | 4 |
| Clock Pulse Frequency | fcl | | | 3 | MHz | VDD=10 Vdc | 4 |
| Clock Pulse Frequency | fcl | | | 4 | MHz | VDD=15 Vdc | 4 |
## CAD (KiCad official)
- Symbol: `MC14516BDR2G`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16-150mil (KiCad packages3D, STEP)
- 3D model files: `mc14516bdr2g-etched.step` / `mc14516bdr2g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mc14516bdr2g.step` / `mc14516bdr2g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/mc14516b-d.pdf) (13 pp, sha256 `4f4ff21408fc0ebd`, retrieved 2026-11-20)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mc14516bdr2g-datasheet.pdf)