component
MC1413BPG
Public Made by Adomby adom
Sungine Voltage References, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMC1413BPG
Sungine · Voltage References · SOP-16
MC1413BPG from Sungine, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Channel 1 Darlington base input with a 2.7 kΩ series resistor for 5 V TTL/CMOS drive; input voltage max 30 V. |
| 2 | IN2 | input | Channel 2 Darlington base input with a 2.7 kΩ series resistor for 5 V TTL/CMOS drive; input voltage max 30 V. |
| 3 | IN3 | input | Channel 3 Darlington base input with a 2.7 kΩ series resistor for 5 V TTL/CMOS drive; input voltage max 30 V. |
| 4 | IN4 | input | Channel 4 Darlington base input with a 2.7 kΩ series resistor for 5 V TTL/CMOS drive; input voltage max 30 V. |
| 5 | IN5 | input | Channel 5 Darlington base input with a 2.7 kΩ series resistor for 5 V TTL/CMOS drive; input voltage max 30 V. |
| 6 | IN6 | input | Channel 6 Darlington base input with a 2.7 kΩ series resistor for 5 V TTL/CMOS drive; input voltage max 30 V. |
| 7 | IN7 | input | Channel 7 Darlington base input with a 2.7 kΩ series resistor for 5 V TTL/CMOS drive; input voltage max 30 V. |
| 8 | GND | power_in | Common emitter ground of the Darlington array. |
| 9 | COM | passive | Common cathode of the clamp (transient suppression) diodes, tied to the inductive load supply. |
| 10 | OUT7 | output | Channel 7 open-collector Darlington output, rated 500 mA continuous and 50 V maximum. |
| 11 | OUT6 | output | Channel 6 open-collector Darlington output, rated 500 mA continuous and 50 V maximum. |
| 12 | OUT5 | output | Channel 5 open-collector Darlington output, rated 500 mA continuous and 50 V maximum. |
| 13 | OUT4 | output | Channel 4 open-collector Darlington output, rated 500 mA continuous and 50 V maximum. |
| 14 | OUT3 | output | Channel 3 open-collector Darlington output, rated 500 mA continuous and 50 V maximum. |
| 15 | OUT2 | output | Channel 2 open-collector Darlington output, rated 500 mA continuous and 50 V maximum. |
| 16 | OUT1 | output | Channel 1 open-collector Darlington output, rated 500 mA continuous and 50 V maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Sungine |
| Package | SOP-16 |
| Category | Power Supply Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output leakage current | ICEX | 50 | uA | VO=50V | 3 | ||
| Output leakage current | ICEX | 100 | uA | VO=50V, TA=70℃ | 3 | ||
| Collector-emitter saturation voltage | VCE(sat) | 0.9 | 1.1 | V | IC=100mA, IB=250uA | 3 | |
| Collector-emitter saturation voltage | VCE(sat) | 1.1 | 1.3 | V | IC=200mA, IB=350uA | 3 | |
| Collector-emitter saturation voltage | VCE(sat) | 1.3 | 1.6 | V | IC=350mA, IB=500uA | 3 | |
| Input current - on state | II(ON) | 0.93 | 1.35 | mA | VI=3.85V | 3 | |
| Input current - off state | II(OFF) | 50 | 65 | uA | Tamb=70℃, IC=500uA | 3 | |
| Input voltage - on state | VI(ON) | 2.4 | V | VCE=2.0V, IC=200mA | 3 | ||
| Input voltage - on state | VI(ON) | 2.7 | V | VCE=2.0V, IC=250mA | 3 | ||
| Input voltage - on state | VI(ON) | 3 | V | VCE=2.0V, IC=300mA | 3 | ||
| Input capacitance | CI | 15 | 25 | pF | 3 | ||
| Turn-on delay time | ton | 0.25 | 1 | us | 50% EI to 50% EO | 3 | |
| Turn-off delay time | toff | 0.25 | 1 | us | 50% EI to 50% EO | 3 | |
| Clamp diode reverse leakage current | IR | 50 | uA | VR=50V | 3 | ||
| Clamp diode reverse leakage current | IR | 100 | uA | VR=50V, TA=+70℃ | 3 | ||
| Clamp diode forward voltage | VF | 1.7 | 2 | V | IF=350mA | 3 | |
| Output voltage | Vo | 50 | V | Ta=25℃ | 2 | ||
| Input voltage | Vi | 30 | V | Ta=25℃ | 2 | ||
| Collector current - continuous | Ic | 500 | mA | Ta=25℃ | 2 | ||
| Base current - continuous | IB | 25 | mA | Ta=25℃ | 2 | ||
| Operating temperature | TA | -40 | 85 | ℃ | 2 | ||
| Storage temperature | Tstg | -55 | 150 | ℃ | 2 | ||
| Maximum junction temperature | TJ | 150 | ℃ | 2 | |||
| Thermal resistance junction-ambient | Rth j-amb | 100 | ℃/W | SOP16 | 2 |
CAD (KiCad official)
- Symbol:
MC1413BPG - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
mc1413bpg-etched.step/mc1413bpg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc1413bpg.step/mc1413bpg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Sungine datasheet (7 pp, sha256
c00d393680bf0def, retrieved 2026-10-22, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).