MC14013BDTR2G

{
 "schema": "adom.pads/1",
 "slug": "mc14013bdtr2g",
 "footprint": "TSSOP-14_4.4x5mm_P0.65mm",
 "generated_from": {
  "footprint": "TSSOP-14_4.4x5mm_P0.65mm@sha256:e4bf82cea6d3b325",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.8625,
   -1.95
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TSSOP-14_4.4x5mm_P0.65mm@sha256:e4bf82cea6d3b325"
 },
 "pad_count": 14,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "QA",
   "type": "output",
   "description": "Flip-flop A true output (Q). CMOS push-pull output; drives two low-power TTL loads or one LS-TTL load over rated temperature range.",
   "is_pin1": true,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "QA_N",
   "type": "output",
   "description": "Flip-flop A complementary output (Q-bar). CMOS push-pull output; always the logical inverse of QA except in the Set=Reset=1 override condition.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "CA",
   "type": "input",
   "description": "Flip-flop A Clock input. Data is transferred from D to Q on the positive-going edge of the clock pulse. CMOS input with diode protection.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "RA",
   "type": "input",
   "description": "Flip-flop A Direct Reset input (active high, asynchronous). When high, forces QA=0 and QA_N=1 independent of clock and data.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "DA",
   "type": "input",
   "description": "Flip-flop A Data input. Sampled on the positive-going edge of CA and transferred to QA. Setup/hold times of ~40 ns at VDD=5 V.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "SA",
   "type": "input",
   "description": "Flip-flop A Direct Set input (active high, asynchronous). When high, forces QA=1 and QA_N=0 independent of clock and data.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "VSS",
   "type": "power_in",
   "description": "Negative supply / ground reference. All input and output voltages are referenced to VSS. Typically tied to 0 V.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "SB",
   "type": "input",
   "description": "Flip-flop B Direct Set input (active high, asynchronous). When high, forces QB=1 and QB_N=0 independent of clock and data.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "DB",
   "type": "input",
   "description": "Flip-flop B Data input. Sampled on the positive-going edge of CB and transferred to QB.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "RB",
   "type": "input",
   "description": "Flip-flop B Direct Reset input (active high, asynchronous). When high, forces QB=0 and QB_N=1 independent of clock and data.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "CB",
   "type": "input",
   "description": "Flip-flop B Clock input. Data is transferred from D to Q on the positive-going edge of the clock pulse.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -0.65
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "QB_N",
   "type": "output",
   "description": "Flip-flop B complementary output (Q-bar). CMOS push-pull output; logical inverse of QB except in the Set=Reset=1 override condition.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -1.3
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "QB",
   "type": "output",
   "description": "Flip-flop B true output (Q). CMOS push-pull output; drives two low-power TTL loads or one LS-TTL load over rated temperature range.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -1.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "VDD",
   "type": "power_in",
   "description": "Positive supply voltage. Rated range 3.0 to 18 Vdc (absolute max 18 V). Bypass with a ceramic capacitor to VSS close to the pin.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-14_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}