MC14013BDR2G

{
 "schema": "adom.pads/1",
 "slug": "mc14013bdr2g",
 "footprint": "SOIC-14_3.9x8.7mm_P1.27mm",
 "generated_from": {
  "footprint": "SOIC-14_3.9x8.7mm_P1.27mm@sha256:a885b619b22880c9",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.475,
   -3.81
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOIC-14_3.9x8.7mm_P1.27mm@sha256:a885b619b22880c9"
 },
 "pad_count": 14,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "QA",
   "type": "output",
   "description": "Flip-flop A true output. CMOS push-pull output; drives two low-power TTL loads or one LS-TTL load across the rated supply range (3.0-18 V).",
   "is_pin1": true,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "QA_N",
   "type": "output",
   "description": "Flip-flop A complementary (Q-bar) output. Always the logical inverse of QA except in the Set=Reset=1 illegal state where both outputs go high.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "CA",
   "type": "input",
   "description": "Flip-flop A clock input. Data on DA is transferred to QA on the positive-going (rising) edge of this clock. CMOS input with diode protection; VIH >= 0.7*VDD, VIL <= 0.3*VDD.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "RA",
   "type": "input",
   "description": "Flip-flop A asynchronous Direct Reset input, active-high. Forces QA=0 and QA_N=1 regardless of Clock/Data. Tie low (VSS) during normal edge-clocked operation.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "DA",
   "type": "input",
   "description": "Flip-flop A Data input. The logic level present on DA is captured to QA on the rising edge of CA. Setup/hold: 40 ns / 40 ns at VDD=5 V (min).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "SA",
   "type": "input",
   "description": "Flip-flop A asynchronous Direct Set input, active-high. Forces QA=1 and QA_N=0 regardless of Clock/Data. Tie low (VSS) during normal edge-clocked operation.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "VSS",
   "type": "power_in",
   "description": "Negative supply / ground reference. All input/output voltages are referenced to VSS.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "SB",
   "type": "input",
   "description": "Flip-flop B asynchronous Direct Set input, active-high. Forces QB=1 and QB_N=0 regardless of Clock/Data. Tie low (VSS) during normal edge-clocked operation.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "DB",
   "type": "input",
   "description": "Flip-flop B Data input. The logic level present on DB is captured to QB on the rising edge of CB. Setup/hold: 40 ns / 40 ns at VDD=5 V (min).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "RB",
   "type": "input",
   "description": "Flip-flop B asynchronous Direct Reset input, active-high. Forces QB=0 and QB_N=1 regardless of Clock/Data. Tie low (VSS) during normal edge-clocked operation.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "CB",
   "type": "input",
   "description": "Flip-flop B clock input. Data on DB is transferred to QB on the positive-going (rising) edge of this clock. Max clock frequency 2 MHz @ 5 V, 5 MHz @ 10 V, 7 MHz @ 15 V.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -1.27
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "QB_N",
   "type": "output",
   "description": "Flip-flop B complementary (Q-bar) output. Always the logical inverse of QB except in the Set=Reset=1 illegal state where both outputs go high.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -2.54
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "QB",
   "type": "output",
   "description": "Flip-flop B true output. CMOS push-pull output; drives two low-power TTL loads or one LS-TTL load across the rated supply range (3.0-18 V).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -3.81
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "VDD",
   "type": "power_in",
   "description": "Positive supply input. Operating range 3.0 V to 18 V (absolute max -0.5 to +18.0 V). Bypass locally to VSS.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-14_3.9x8.7mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}