Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
MC100EP35DTG
onsemi · Flip Flops · TSSOP-8
MC100EP35DTG from onsemi, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | J | input | ECL signal input J, with internal 75 kΩ pulldown so it defaults LOW when left open. |
| 2 | K | input | ECL signal input K, with internal 75 kΩ pulldown so it defaults LOW when left open. |
| 3 | CLK | input | ECL clock input, with internal 75 kΩ pulldown; outputs update on the positive (LOW to HIGH) clock transition and it defaults LOW when left open. |
| 4 | RESET | input | ECL asynchronous reset input, active with a logic HIGH, with internal 75 kΩ pulldown so it defaults LOW when left open. |
| 5 | VEE | power_in | Negative supply, 0 V in PECL mode or −3.0 V to −5.5 V in NECL mode. |
| 6 | Q̅ | output | ECL complementary data output, nominally loaded with 50 Ω to VCC − 2.0 V. |
| 7 | Q | output | ECL true data output, nominally loaded with 50 Ω to VCC − 2.0 V; defaults LOW with inputs open or at VEE. |
| 8 | VCC | power_in | Positive supply, 3.0 V to 5.5 V in PECL mode or 0 V in NECL mode. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TSSOP-8 |
| Category | Logic ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| PECL Mode Power Supply | VCC | 6 | V | VEE = 0 V | 3 | ||
| NECL Mode Power Supply | VEE | -6 | V | VCC = 0 V | 3 | ||
| PECL Mode Input Voltage | VI | 6 | V | VEE = 0 V; VI ≤ VCC | 3 | ||
| NECL Mode Input Voltage | VI | -6 | V | VCC = 0 V; VI ≥ VEE | 3 | ||
| Output Current Continuous | Iout | 50 | mA | Continuous | 3 | ||
| Output Current Surge | Iout | 100 | mA | Surge | 3 | ||
| Operating Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 3 | ||
| Thermal Resistance Junction-to-Ambient | JA | 185 | °C/W | 0 lfpm; JEDEC 2S2P board, TSSOP-8 | 3 | ||
| Thermal Resistance Junction-to-Ambient | JA | 140 | °C/W | 500 lfpm; JEDEC 2S2P board, TSSOP-8 | 3 | ||
| Thermal Resistance Junction-to-Case | JC | 41 | 44 | °C/W | Standard board, TSSOP-8 | 3 | |
| Wave Solder (Pb-Free) | Tsol | 265 | °C | <2 to 3 sec @ 260°C | 3 | ||
| Power Supply Current | IEE | 30 | 40 | 50 | mA | PECL, VCC = 3.3 V, VEE = 0 V; −40 to 85 °C | 3 |
| Output HIGH Voltage | VOH | 2155 | 2280 | 2405 | mV | PECL, VCC = 3.3 V; all loads 50 Ω to VCC − 2.0 V (Note 2); −40 to 85 °C | 3 |
| Output LOW Voltage | VOL | 1355 | 1480 | 1605 | mV | PECL, VCC = 3.3 V; all loads 50 Ω to VCC − 2.0 V (Note 2); −40 to 85 °C | 3 |
| Input HIGH Voltage (Single-Ended) | VIH | 2075 | 2420 | mV | PECL, VCC = 3.3 V; −40 to 85 °C | 3 | |
| Input LOW Voltage (Single-Ended) | VIL | 1355 | 1675 | mV | PECL, VCC = 3.3 V; −40 to 85 °C | 3 | |
| Input HIGH Current | IIH | 150 | µA | PECL, VCC = 3.3 V; −40 to 85 °C | 3 | ||
| Input LOW Current | IIL | 0.5 | µA | PECL, VCC = 3.3 V; −40 to 85 °C | 3 | ||
| Output HIGH Voltage | VOH | 3855 | 3980 | 4105 | mV | PECL, VCC = 5.0 V; all loads 50 Ω to VCC − 2.0 V (Note 2); −40 to 85 °C | 3 |
| Output LOW Voltage | VOL | 3055 | 3180 | 3305 | mV | PECL, VCC = 5.0 V; all loads 50 Ω to VCC − 2.0 V (Note 2); −40 to 85 °C | 3 |
| Input HIGH Voltage (Single-Ended) | VIH | 3775 | 4120 | mV | PECL, VCC = 5.0 V; −40 to 85 °C | 3 | |
| Input LOW Voltage (Single-Ended) | VIL | 3055 | 3375 | mV | PECL, VCC = 5.0 V; −40 to 85 °C | 3 | |
| Power Supply Current | IEE | 30 | 40 | 50 | mA | NECL, VCC = 0 V; VEE = −5.5 V to −3.0 V; −40 to 85 °C | 4 |
| Output HIGH Voltage | VOH | -1145 | -1020 | -895 | mV | NECL, VCC = 0 V; all loads 50 Ω to VCC − 2.0 V (Note 2); −40 to 85 °C | 4 |
| Output LOW Voltage | VOL | -1945 | -1820 | -1695 | mV | NECL, VCC = 0 V; all loads 50 Ω to VCC − 2.0 V (Note 2); −40 to 85 °C | 4 |
| Input HIGH Voltage (Single-Ended) | VIH | -1225 | -880 | mV | NECL, VCC = 0 V; −40 to 85 °C | 4 | |
| Input LOW Voltage (Single-Ended) | VIL | -1945 | -1625 | mV | NECL, VCC = 0 V; −40 to 85 °C | 4 | |
| Input HIGH Current | IIH | 150 | µA | NECL, VCC = 0 V; −40 to 85 °C | 4 | ||
| Input LOW Current | IIL | 0.5 | µA | NECL, VCC = 0 V; −40 to 85 °C | 4 | ||
| Maximum Frequency | fmax | 3 | GHz | Printed as '> 3'; see Figure 2 (Fmax/Jitter); −40 to 85 °C | 4 | ||
| Propagation Delay to Output Differential, R, CLK to Q, Q | tPLH, tPHL | 200 | 400 | 480 | ps | −40 °C; 750 mV source, 50% duty cycle clock; all loads 50 Ω to VCC − 2.0 V (Note 1) | 4 |
| Propagation Delay to Output Differential, R, CLK to Q, Q | tPLH, tPHL | 200 | 410 | 490 | ps | 25 °C; 750 mV source, 50% duty cycle clock; all loads 50 Ω to VCC − 2.0 V (Note 1) | 4 |
| Propagation Delay to Output Differential, R, CLK to Q, Q | tPLH, tPHL | 200 | 420 | 575 | ps | 85 °C; 750 mV source, 50% duty cycle clock; all loads 50 Ω to VCC − 2.0 V (Note 1) | 4 |
| Output Rise/Fall Times, Q, Q (20% − 80%) | tr, tf | 70 | 120 | 170 | ps | −40 °C; all loads 50 Ω to VCC − 2.0 V (Note 1) | 4 |
| Output Rise/Fall Times, Q, Q (20% − 80%) | tr, tf | 80 | 130 | 180 | ps | 25 °C; all loads 50 Ω to VCC − 2.0 V (Note 1) | 4 |
| Output Rise/Fall Times, Q, Q (20% − 80%) | tr, tf | 100 | 150 | 200 | ps | 85 °C; all loads 50 Ω to VCC − 2.0 V (Note 1) | 4 |
| Cycle-to-Cycle Jitter | tJITTER | 0.2 | 1 | ps | See Figure 2 (Fmax/Jitter); printed as '< 1' ps; −40 to 85 °C | 4 |
CAD (KiCad official)
- Symbol:
MC100EP35DTG - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
mc100ep35dtg-etched.step/mc100ep35dtg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc100ep35dtg.step/mc100ep35dtg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (7 pp, sha256
c8612317a10b694d, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).