3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMC100EL1648DG
onsemi · Voltage Controlled Oscillators (VCO) · SOIC-8
MC100EL1648DG from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TANK | input | Oscillator input connected to the external parallel tank circuit (inductor L and capacitor C), which may include a varactor diode for voltage-controlled tuning. |
| 2 | VCC | power_in | Positive supply: VCC = 4.2 V to 5.5 V with VEE = 0 V in PECL mode, and all VCC and VEE pins must be externally connected to the power supply for proper operation. |
| 3 | VCC | power_in | Positive supply: VCC = 4.2 V to 5.5 V with VEE = 0 V in PECL mode, and all VCC and VEE pins must be externally connected to the power supply for proper operation. |
| 4 | OUT | output | ECL output with an on-chip 510 Ω emitter termination resistor, intended to drive one ECL load (3.0 pF), with a continuous output current rating of 50 mA. |
| 5 | AGC | input | Automatic gain control input that sets the peak-to-peak swing of the tank circuit; a series resistor to the most negative supply gives a sine-wave output, and a 1.0 kΩ minimum resistor to the most positive supply extends the square-wave range above about 100 MHz. |
| 6 | VEE | power_in | Negative supply: VEE = −4.2 V to −5.5 V with VCC = 0 V in NECL mode, and all VCC and VEE pins must be externally connected to the power supply for proper operation. |
| 7 | VEE | power_in | Negative supply: VEE = −4.2 V to −5.5 V with VCC = 0 V in NECL mode, and all VCC and VEE pins must be externally connected to the power supply for proper operation. |
| 8 | BIAS | output | Oscillator input reference voltage giving a guaranteed dc bias point (typically 1800 mV in PECL, −3200 mV in NECL) for a varactor tuning diode, whose cathode must be biased at least 1.4 V above VEE. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | RF & Radio |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply (positive supply, PECL mode) | VCC | 0 | 7 | V | PECL Mode; VEE = 0 V | 3 | |
| Power Supply (negative supply, NECL mode) | VEE | -7 | 0 | V | NECL Mode; VCC = 0 V | 3 | |
| PECL Mode Input Voltage | VI | 0 | 6 | V | PECL Mode; VEE = 0 V | 3 | |
| NECL Mode Input Voltage | VI | -6 | 0 | V | NECL Mode; VCC = 0 V | 3 | |
| Output Current Continuous | Iout | 50 | mA | Continuous | 3 | ||
| Output Current Surge | Iout | 100 | mA | Surge | 3 | ||
| Operating Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 3 | ||
| Wave Solder (Pb-Free) | Tsol | 265 | °C | Pb-Free; <2 to 3 sec @ 260°C | 3 | ||
| Thermal Resistance (Junction-to-Ambient), SOIC-8, 0 lfpm | JA | 190 | °C/W | 0 lfpm; SOIC-8 | 3 | ||
| Thermal Resistance (Junction-to-Ambient), SOIC-8, 500 lfpm | JA | 130 | °C/W | 500 lfpm; SOIC-8 | 3 | ||
| Thermal Resistance (Junction-to-Case), SOIC-8 | JC | 41 | 44 | °C/W | Standard Board; SOIC-8 | 3 | |
| Power Supply Current (PECL) | IEE | 13 | 19 | 25 | mA | TA = −40°C; VCC = 5.0 V; VEE = 0.0 V +0.8 / −0.5 V (Note 2) | 4 |
| Output HIGH Voltage (PECL) | VOH | 3950 | 4170 | 4610 | mV | TA = −40°C; VCC = 5.0 V; VEE = 0.0 V +0.8 / −0.5 V (Note 2) | 4 |
| Output LOW Voltage (PECL) | VOL | 3040 | 3410 | 3600 | mV | TA = −40°C; VCC = 5.0 V; VEE = 0.0 V +0.8 / −0.5 V (Note 2) | 4 |
| Automatic Gain Control Input (PECL) | AGC | 1690 | 1980 | mV | TA = −40°C; VCC = 5.0 V; VEE = 0.0 V +0.8 / −0.5 V (Note 2) | 4 | |
| Bias Voltage (PECL) | VBIAS | 1650 | 1800 | mV | TA = −40°C; VCC = 5.0 V; VEE = 0.0 V +0.8 / −0.5 V (Note 2) | 4 | |
| Input LOW Voltage (PECL) | VIL | 1.5 | V | TA = −40°C; VCC = 5.0 V; VEE = 0.0 V +0.8 / −0.5 V (Note 2) | 4 | ||
| Input LOW Voltage (PECL) | VIL | 1.35 | V | TA = 25°C; VCC = 5.0 V; VEE = 0.0 V +0.8 / −0.5 V (Note 2) | 4 | ||
| Input LOW Voltage (PECL) | VIL | 1.2 | V | TA = 85°C; VCC = 5.0 V; VEE = 0.0 V +0.8 / −0.5 V (Note 2) | 4 | ||
| Input HIGH Voltage (PECL) | VIH | 2 | V | TA = −40°C; VCC = 5.0 V; VEE = 0.0 V +0.8 / −0.5 V (Note 2) | 4 | ||
| Input HIGH Voltage (PECL) | VIH | 1.85 | V | TA = 25°C; VCC = 5.0 V; VEE = 0.0 V +0.8 / −0.5 V (Note 2) | 4 | ||
| Input HIGH Voltage (PECL) | VIH | 1.7 | V | TA = 85°C; VCC = 5.0 V; VEE = 0.0 V +0.8 / −0.5 V (Note 2) | 4 | ||
| Input Current (PECL) | IL | -5 | mA | TA = −40°C; VCC = 5.0 V; VEE = 0.0 V +0.8 / −0.5 V (Note 2) | 4 | ||
| Power Supply Current (NECL) | IEE | 13 | 19 | 25 | mA | TA = −40°C; VCC = 0.0 V; VEE = −5.0 V +0.8 / −0.5 V (Note 5) | 4 |
| Output HIGH Voltage (NECL) | VOH | -1050 | -830 | -399 | mV | TA = −40°C; VCC = 0.0 V; VEE = −5.0 V +0.8 / −0.5 V (Note 5) | 4 |
| Output LOW Voltage (NECL) | VOL | -1960 | -1590 | -1400 | mV | TA = −40°C; VCC = 0.0 V; VEE = −5.0 V +0.8 / −0.5 V (Note 5) | 4 |
| Automatic Gain Control Input (NECL) | AGC | -3310 | -3020 | mV | TA = −40°C; VCC = 0.0 V; VEE = −5.0 V +0.8 / −0.5 V (Note 5) | 4 | |
| Bias Voltage (NECL) | VBIAS | -3350 | -3200 | mV | TA = −40°C; VCC = 0.0 V; VEE = −5.0 V +0.8 / −0.5 V (Note 5) | 4 | |
| Input LOW Voltage (NECL) | VIL | -3.5 | V | TA = −40°C; VCC = 0.0 V; VEE = −5.0 V +0.8 / −0.5 V (Note 5) | 4 | ||
| Input LOW Voltage (NECL) | VIL | -3.65 | V | TA = 25°C; VCC = 0.0 V; VEE = −5.0 V +0.8 / −0.5 V (Note 5) | 4 | ||
| Input LOW Voltage (NECL) | VIL | -3.8 | V | TA = 85°C; VCC = 0.0 V; VEE = −5.0 V +0.8 / −0.5 V (Note 5) | 4 | ||
| Input HIGH Voltage (NECL) | VIH | -3 | V | TA = −40°C; VCC = 0.0 V; VEE = −5.0 V +0.8 / −0.5 V (Note 5) | 4 | ||
| Input HIGH Voltage (NECL) | VIH | -3.15 | V | TA = 25°C; VCC = 0.0 V; VEE = −5.0 V +0.8 / −0.5 V (Note 5) | 4 | ||
| Input HIGH Voltage (NECL) | VIH | -3.3 | V | TA = 85°C; VCC = 0.0 V; VEE = −5.0 V +0.8 / −0.5 V (Note 5) | 4 | ||
| Input Current (NECL) | IL | -5 | mA | TA = −40°C; VCC = 0.0 V; VEE = −5.0 V +0.8 / −0.5 V (Note 5) | 4 |
CAD (KiCad official)
- Symbol:
MC100EL1648DG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mc100el1648dg-etched.step/mc100el1648dg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc100el1648dg.step/mc100el1648dg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (16 pp, sha256
ff40b93e7c92a16b, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).