main
Ray
Publish 0.1.0
c72f668
MBI6655GSB-B
MBI · LED Drivers · SOT-89-5
MBI6655GSB-B from MBI, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch output pin; the datasheet gives an SW pin withstand voltage of -0.3 to 40 V and a minimum SW dropout voltage of 0.3 V at IOUT = 1 A. |
| 2 | GND | power_in | Ground pin; the datasheet recommends keeping the GND pin within 5 mm of the input and output capacitor negative terminals and soldering it to a ground plane. |
| 3 | DIM | input | PWM dimming control input; a logic low below 0.3 V turns the internal MOSFET off, a high level needs at least 2.5 V, and the pin withstands -0.3 to 40 V. |
| 4 | SEN | input | Output current sense input connected to the external sense resistor RSEN, where the average SEN voltage is 100 mV (range 95 to 105 mV) with VIN = 12 V. |
| 5 | VIN | power_in | Supply voltage input; the recommended operating range is 6 to 36 V, with an absolute maximum rating of 0 to 40 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MBI |
| Package | SOT-89-5 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VIN | 0 | 40 | V | 4 | ||
| Output current | IOUT | 1.2 | A | 4 | |||
| DIM pin output withstand voltage | VDIM | -0.3 | 40 | V | 4 | ||
| SW pin output withstand voltage | VSW | -0.3 | 40 | V | 4 | ||
| GND pin current | IGND | 1.2 | A | 4 | |||
| Power dissipation GSB package | PD | 1.77 | W | four-layer PCB, Ta=25°C | 4 | ||
| Thermal resistance junction-ambient GSB package | Rth(j-a) | 49.7 | °C/W | four-layer PCB simulation | 4 | ||
| Junction temperature maximum | Tj,max | 150 | °C | 4 | |||
| Ambient operating temperature | Topr | -40 | 85 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| ESD human body model HBM | 4000 | V | MIL-STD-883H Method 3015.8, Class 3A | 4 | |||
| ESD machine model MM | 350 | V | ESDA-STM5.2-2009, Class M3 | 4 | |||
| Supply voltage recommended | VIN | 6 | 36 | V | 4 | ||
| Chip operating temperature | Tj | -40 | 125 | °C | 4 | ||
| Supply voltage | VIN | 6 | 36 | V | 5 | ||
| Supply current | IIN | 1 | 2 | mA | VIN=6V~36V | 5 | |
| Output current | IOUT | 350 | 1000 | mA | 5 | ||
| Output current accuracy | dIOUT/IOUT | -5 | 3 | 5 | % | 150mA≤IOUT≤1000mA, | 5 |
| SW pin minimum dropout voltage | ΔVSW | 0.3 | V | IOUT=1A | 5 | ||
| Internal propagation delay time | Tpd | 100 | 200 | 320 | ns | VIN=12V | 5 |
| Efficiency | 96 | % | VIN=12V, IOUT=350mA, VOUT=10.8V | 5 | |||
| DIM input high voltage | VIH | 2.5 | V | 5 | |||
| DIM input low voltage | VIL | 0.3 | V | 5 | |||
| Switch on-resistance | Rds(on) | 0.2 | 0.3 | 0.4 | Ω | VIN=12V; test circuit (b) | 5 |
| Minimum on-time | TON,min | 300 | ns | VIN=12V | 5 | ||
| Minimum off-time | TOFF,min | 300 | ns | VIN=12V | 5 | ||
| SW duty cycle recommended range | Dsw | 20 | 80 | % | 5 | ||
| Maximum operating frequency | FreqMax | 40 | 1000 | kHz | 5 | ||
| SEN pin average voltage | VSEN | 95 | 100 | 105 | mV | VIN=12V, V1=1V; test circuit (c) | 5 |
| Over-temperature protection shutdown | TSD | 145 | 165 | 175 | °C | 5 | |
| Over-temperature protection hysteresis | TSD-HYS | 20 | 30 | 40 | °C | 5 | |
| Over-current protection trip | Iocp | 2.2 | 2.5 | A | VIN=36V | 5 | |
| PWM dimming duty range | DutyDIM | 1 | 100 | % | PWM frequency: 1KHz | 5 |
CAD (KiCad official)
- Symbol:
MBI6655GSB-B - Footprint:
Package_TO_SOT_SMD:SOT-89-5 - 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files:
mbi6655gsb-b-etched.step/mbi6655gsb-b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mbi6655gsb-b.step/mbi6655gsb-b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MBI datasheet (23 pp, sha256
03256fb6533cdd60, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MBI6655GSB-B
**MBI** · LED Drivers · SOT-89-5
MBI6655GSB-B from MBI, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch output pin; the datasheet gives an SW pin withstand voltage of -0.3 to 40 V and a minimum SW dropout voltage of 0.3 V at IOUT = 1 A. |
| 2 | GND | power_in | Ground pin; the datasheet recommends keeping the GND pin within 5 mm of the input and output capacitor negative terminals and soldering it to a ground plane. |
| 3 | DIM | input | PWM dimming control input; a logic low below 0.3 V turns the internal MOSFET off, a high level needs at least 2.5 V, and the pin withstands -0.3 to 40 V. |
| 4 | SEN | input | Output current sense input connected to the external sense resistor RSEN, where the average SEN voltage is 100 mV (range 95 to 105 mV) with VIN = 12 V. |
| 5 | VIN | power_in | Supply voltage input; the recommended operating range is 6 to 36 V, with an absolute maximum rating of 0 to 40 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MBI |
| Package | SOT-89-5 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VIN | 0 | | 40 | V | | 4 |
| Output current | IOUT | | | 1.2 | A | | 4 |
| DIM pin output withstand voltage | VDIM | -0.3 | | 40 | V | | 4 |
| SW pin output withstand voltage | VSW | -0.3 | | 40 | V | | 4 |
| GND pin current | IGND | | | 1.2 | A | | 4 |
| Power dissipation GSB package | PD | | | 1.77 | W | four-layer PCB, Ta=25°C | 4 |
| Thermal resistance junction-ambient GSB package | Rth(j-a) | | | 49.7 | °C/W | four-layer PCB simulation | 4 |
| Junction temperature maximum | Tj,max | | | 150 | °C | | 4 |
| Ambient operating temperature | Topr | -40 | | 85 | °C | | 4 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 4 |
| ESD human body model HBM | | | | 4000 | V | MIL-STD-883H Method 3015.8, Class 3A | 4 |
| ESD machine model MM | | | | 350 | V | ESDA-STM5.2-2009, Class M3 | 4 |
| Supply voltage recommended | VIN | 6 | | 36 | V | | 4 |
| Chip operating temperature | Tj | -40 | | 125 | °C | | 4 |
| Supply voltage | VIN | 6 | | 36 | V | | 5 |
| Supply current | IIN | | 1 | 2 | mA | VIN=6V~36V | 5 |
| Output current | IOUT | | 350 | 1000 | mA | | 5 |
| Output current accuracy | dIOUT/IOUT | -5 | 3 | 5 | % | 150mA≤IOUT≤1000mA, | 5 |
| SW pin minimum dropout voltage | ΔVSW | | 0.3 | | V | IOUT=1A | 5 |
| Internal propagation delay time | Tpd | 100 | 200 | 320 | ns | VIN=12V | 5 |
| Efficiency | | | 96 | | % | VIN=12V, IOUT=350mA, VOUT=10.8V | 5 |
| DIM input high voltage | VIH | 2.5 | | | V | | 5 |
| DIM input low voltage | VIL | | | 0.3 | V | | 5 |
| Switch on-resistance | Rds(on) | 0.2 | 0.3 | 0.4 | Ω | VIN=12V; test circuit (b) | 5 |
| Minimum on-time | TON,min | | 300 | | ns | VIN=12V | 5 |
| Minimum off-time | TOFF,min | | 300 | | ns | VIN=12V | 5 |
| SW duty cycle recommended range | Dsw | 20 | | 80 | % | | 5 |
| Maximum operating frequency | FreqMax | 40 | | 1000 | kHz | | 5 |
| SEN pin average voltage | VSEN | 95 | 100 | 105 | mV | VIN=12V, V1=1V; test circuit (c) | 5 |
| Over-temperature protection shutdown | TSD | 145 | 165 | 175 | °C | | 5 |
| Over-temperature protection hysteresis | TSD-HYS | 20 | 30 | 40 | °C | | 5 |
| Over-current protection trip | Iocp | | 2.2 | 2.5 | A | VIN=36V | 5 |
| PWM dimming duty range | DutyDIM | 1 | | 100 | % | PWM frequency: 1KHz | 5 |
## CAD (KiCad official)
- Symbol: `MBI6655GSB-B`
- Footprint: `Package_TO_SOT_SMD:SOT-89-5`
- 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files: `mbi6655gsb-b-etched.step` / `mbi6655gsb-b-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mbi6655gsb-b.step` / `mbi6655gsb-b.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MBI datasheet](docs/mbi6655gsb-b-datasheet.pdf) (23 pp, sha256 `03256fb6533cdd60`, retrieved 2026-10-27, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mbi6655gsb-b-datasheet.pdf)