main
Ray
mbi5252gp-a: laser-etched CAD + chip hero (factory 2.0.0 backfill)
360c14e
MBI5252GP-A
MBI · LED Display Drivers · SSOP-24
MBI5252GP-A from MBI, in a SSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for control logic and constant-current sinks. |
| 2 | SDI | input | Serial data input to the 16-bit shift register. Sampled by DCLK rising edge with 5 ns setup / 6 ns hold. CMOS logic level (VIH ≥ 0.7*VDD). |
| 3 | DCLK | input | Data clock input; shifts SDI data on rising edge and clocks command information when LE is asserted. Max 30 MHz. |
| 4 | LE | input | Data strobe / latch enable. Also carries command information decoded together with DCLK. Internal pull-down resistor 250-800 kΩ (typ. 450 kΩ). |
| 5 | OUT0 | output | Constant-current sink output for LED channel 0. Sustaining voltage up to 17 V; programmable 0.5-20 mA (5 V VDD) via R-EXT. |
| 6 | OUT1 | output | Constant-current sink output for LED channel 1. |
| 7 | OUT2 | output | Constant-current sink output for LED channel 2. |
| 8 | OUT3 | output | Constant-current sink output for LED channel 3. |
| 9 | OUT4 | output | Constant-current sink output for LED channel 4. |
| 10 | OUT5 | output | Constant-current sink output for LED channel 5. |
| 11 | OUT6 | output | Constant-current sink output for LED channel 6. |
| 12 | OUT7 | output | Constant-current sink output for LED channel 7. |
| 13 | OUT8 | output | Constant-current sink output for LED channel 8. |
| 14 | OUT9 | output | Constant-current sink output for LED channel 9. |
| 15 | OUT10 | output | Constant-current sink output for LED channel 10. |
| 16 | OUT11 | output | Constant-current sink output for LED channel 11. |
| 17 | OUT12 | output | Constant-current sink output for LED channel 12. |
| 18 | OUT13 | output | Constant-current sink output for LED channel 13. |
| 19 | OUT14 | output | Constant-current sink output for LED channel 14. |
| 20 | OUT15 | output | Constant-current sink output for LED channel 15. |
| 21 | GCLK | input | Gray-scale clock input. Counts against PWM data to determine per-channel on-time. Max 33 MHz (16.6 MHz when GCLK multiplier is enabled). |
| 22 | SDO | output | Serial data output; drives SDI of the next cascaded MBI5252 driver. Push-pull CMOS; IOH/IOL = ±1.0 mA, VOH = VDD-0.4 V, VOL = 0.4 V. |
| 23 | R-EXT | passive | External reference-resistor terminal (Rext) that sets the full-scale output current for all 16 channels. Typical range ~1.4 kΩ (10 mA) to 14 kΩ (1 mA). |
| 24 | VDD | power_in | 3.3 V / 5 V logic supply (3.0-5.5 V absolute range). Bypass to GND close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MBI |
| Package | SSOP-24 |
| Category | LED-drv |
| Pins | 24 |
Ordering variants
Same part, different packaging or reel option.
MBI5252GP-AMBI5252GP-AGFN
CAD (KiCad official)
- Symbol:
MBI5252GP-A - Footprint:
Package_SO:SSOP-24_5.3x8.2mm_P0.65mm - 3D model: SSOP-24 (KiCad packages3D, STEP)
- 3D model files:
mbi5252gp-a-etched.step/mbi5252gp-a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mbi5252gp-a.step/mbi5252gp-a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MBI datasheet (29 pp, sha256
e13740d71b82c97e, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MBI5252GP-A
**MBI** · LED Display Drivers · SSOP-24
MBI5252GP-A from MBI, in a SSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for control logic and constant-current sinks. |
| 2 | SDI | input | Serial data input to the 16-bit shift register. Sampled by DCLK rising edge with 5 ns setup / 6 ns hold. CMOS logic level (VIH ≥ 0.7*VDD). |
| 3 | DCLK | input | Data clock input; shifts SDI data on rising edge and clocks command information when LE is asserted. Max 30 MHz. |
| 4 | LE | input | Data strobe / latch enable. Also carries command information decoded together with DCLK. Internal pull-down resistor 250-800 kΩ (typ. 450 kΩ). |
| 5 | OUT0 | output | Constant-current sink output for LED channel 0. Sustaining voltage up to 17 V; programmable 0.5-20 mA (5 V VDD) via R-EXT. |
| 6 | OUT1 | output | Constant-current sink output for LED channel 1. |
| 7 | OUT2 | output | Constant-current sink output for LED channel 2. |
| 8 | OUT3 | output | Constant-current sink output for LED channel 3. |
| 9 | OUT4 | output | Constant-current sink output for LED channel 4. |
| 10 | OUT5 | output | Constant-current sink output for LED channel 5. |
| 11 | OUT6 | output | Constant-current sink output for LED channel 6. |
| 12 | OUT7 | output | Constant-current sink output for LED channel 7. |
| 13 | OUT8 | output | Constant-current sink output for LED channel 8. |
| 14 | OUT9 | output | Constant-current sink output for LED channel 9. |
| 15 | OUT10 | output | Constant-current sink output for LED channel 10. |
| 16 | OUT11 | output | Constant-current sink output for LED channel 11. |
| 17 | OUT12 | output | Constant-current sink output for LED channel 12. |
| 18 | OUT13 | output | Constant-current sink output for LED channel 13. |
| 19 | OUT14 | output | Constant-current sink output for LED channel 14. |
| 20 | OUT15 | output | Constant-current sink output for LED channel 15. |
| 21 | GCLK | input | Gray-scale clock input. Counts against PWM data to determine per-channel on-time. Max 33 MHz (16.6 MHz when GCLK multiplier is enabled). |
| 22 | SDO | output | Serial data output; drives SDI of the next cascaded MBI5252 driver. Push-pull CMOS; IOH/IOL = ±1.0 mA, VOH = VDD-0.4 V, VOL = 0.4 V. |
| 23 | R-EXT | passive | External reference-resistor terminal (Rext) that sets the full-scale output current for all 16 channels. Typical range ~1.4 kΩ (10 mA) to 14 kΩ (1 mA). |
| 24 | VDD | power_in | 3.3 V / 5 V logic supply (3.0-5.5 V absolute range). Bypass to GND close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MBI |
| Package | SSOP-24 |
| Category | LED-drv |
| Pins | 24 |
## Ordering variants
Same part, different packaging or reel option.
- `MBI5252GP-A`
- `MBI5252GP-AGFN`
## CAD (KiCad official)
- Symbol: `MBI5252GP-A`
- Footprint: `Package_SO:SSOP-24_5.3x8.2mm_P0.65mm`
- 3D model: SSOP-24 (KiCad packages3D, STEP)
- 3D model files: `mbi5252gp-a-etched.step` / `mbi5252gp-a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mbi5252gp-a.step` / `mbi5252gp-a.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MBI datasheet](docs/mbi5252gp-a-datasheet.pdf) (29 pp, sha256 `e13740d71b82c97e`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mbi5252gp-a-datasheet.pdf)