main
Ray mbi5035gp-b: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 4c88550
{
  "slug": "mbi5035gp-b",
  "version": "0.1.0",
  "type": "component",
  "description": "MBI LED Drivers, SSOP-24-150mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "led-drv",
    "mbi5035gp-b"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "mbi5035gp-b.kicad_sym",
    "mbi5035gp-b.kicad_mod",
    "mbi5035gp-b.glb",
    "mbi5035gp-b.step",
    "mbi5035gp-b.lbr",
    "docs/hero.png",
    "docs/mbi5035gp-b-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "mbi5035gp-b-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "author": {
    "name": "Ray"
  },
  "component": {
    "mpn": "MBI5035GP-B",
    "manufacturer": "MBI",
    "package": "SSOP-24-150mil",
    "pin_count": 24,
    "category": "LED Drivers",
    "parts": {
      "symbol": "mbi5035gp-b.kicad_sym",
      "footprint": "mbi5035gp-b.kicad_mod",
      "model_3d": "mbi5035gp-b-etched.glb",
      "model_3d_plain": "mbi5035gp-b.glb",
      "model_3d_step": "mbi5035gp-b-etched.step",
      "model_3d_step_plain": "mbi5035gp-b.step",
      "lbr": "mbi5035gp-b.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground terminal for control logic and the constant-current sink outputs. Tie to system 0 V; carries up to 800 mA (I_GND max) when all 16 channels are conducting."
      },
      {
        "number": "2",
        "name": "SDI",
        "type": "input",
        "description": "Serial-data input to the 16-bit shift register. Schmitt-trigger CMOS input; data is clocked in on the rising edge of CLK (t_su(D) ≥ 3 ns, t_h(D) ≥ 5 ns). V_IH ≥ 0.7·V_DD, V_IL ≤ 0.3·V_DD."
      },
      {
        "number": "3",
        "name": "CLK",
        "type": "input",
        "description": "Shift-register clock input. Data on SDI is sampled on the rising edge of CLK; f_CLK up to 25 MHz at V_DD = 5 V (20 MHz at 3.3 V). Schmitt-trigger CMOS input."
      },
      {
        "number": "4",
        "name": "LE",
        "type": "input",
        "description": "Latch-enable (data strobe) input. Shift-register data is transferred to the output latch while LE is high and held when LE goes low. Internally pulled down (R_IN(down) ≈ 500 kΩ typ, 250 kΩ - 800 kΩ)."
      },
      {
        "number": "5",
        "name": "OUT0",
        "type": "output",
        "description": "Constant-current LED sink output, channel 0 (open-drain). Programmable 3-45 mA at V_DD = 5 V (3-30 mA at 3.3 V) via R-EXT. Sustains up to 17 V at V_DS with low knee voltage (0.2 V typ @ 20 mA)."
      },
      {
        "number": "6",
        "name": "OUT1",
        "type": "output",
        "description": "Constant-current LED sink output, channel 1. Same electrical spec as OUT0; staggered ~5 ns after even channels to reduce peak supply current."
      },
      {
        "number": "7",
        "name": "OUT2",
        "type": "output",
        "description": "Constant-current LED sink output, channel 2. Same spec as OUT0 (3-45 mA @ V_DD=5V, V_DS ≤ 17 V)."
      },
      {
        "number": "8",
        "name": "OUT3",
        "type": "output",
        "description": "Constant-current LED sink output, channel 3. Same spec as OUT0."
      },
      {
        "number": "9",
        "name": "OUT4",
        "type": "output",
        "description": "Constant-current LED sink output, channel 4. Same spec as OUT0."
      },
      {
        "number": "10",
        "name": "OUT5",
        "type": "output",
        "description": "Constant-current LED sink output, channel 5. Same spec as OUT0."
      },
      {
        "number": "11",
        "name": "OUT6",
        "type": "output",
        "description": "Constant-current LED sink output, channel 6. Same spec as OUT0."
      },
      {
        "number": "12",
        "name": "OUT7",
        "type": "output",
        "description": "Constant-current LED sink output, channel 7. Same spec as OUT0."
      },
      {
        "number": "13",
        "name": "OUT8",
        "type": "output",
        "description": "Constant-current LED sink output, channel 8. Same spec as OUT0."
      },
      {
        "number": "14",
        "name": "OUT9",
        "type": "output",
        "description": "Constant-current LED sink output, channel 9. Same spec as OUT0."
      },
      {
        "number": "15",
        "name": "OUT10",
        "type": "output",
        "description": "Constant-current LED sink output, channel 10. Same spec as OUT0."
      },
      {
        "number": "16",
        "name": "OUT11",
        "type": "output",
        "description": "Constant-current LED sink output, channel 11. Same spec as OUT0."
      },
      {
        "number": "17",
        "name": "OUT12",
        "type": "output",
        "description": "Constant-current LED sink output, channel 12. Same spec as OUT0."
      },
      {
        "number": "18",
        "name": "OUT13",
        "type": "output",
        "description": "Constant-current LED sink output, channel 13. Same spec as OUT0."
      },
      {
        "number": "19",
        "name": "OUT14",
        "type": "output",
        "description": "Constant-current LED sink output, channel 14. Same spec as OUT0."
      },
      {
        "number": "20",
        "name": "OUT15",
        "type": "output",
        "description": "Constant-current LED sink output, channel 15. Same spec as OUT0."
      },
      {
        "number": "21",
        "name": "/OE",
        "type": "input",
        "description": "Active-low output enable. When /OE is low, all 16 constant-current output drivers are enabled; when high, all outputs are turned off (blanked). Internally pulled up (R_IN(up) ≈ 500 kΩ typ, 250 kΩ - 800 kΩ), so the outputs default to OFF if the pin is left floating."
      },
      {
        "number": "22",
        "name": "SDO",
        "type": "output",
        "description": "Serial-data output - feeds the SDI of the next cascaded driver. Push-pull CMOS output (V_OH ≥ V_DD-0.4 V @ -1 mA, V_OL ≤ 0.4 V @ 1 mA). SDO updates on the rising edge of CLK."
      },
      {
        "number": "23",
        "name": "R-EXT",
        "type": "passive",
        "description": "External reference-resistor terminal. A resistor (R_ext) from this pin to GND sets the constant output current for all 16 channels: I_OUT = (V_R-EXT/R_ext)·15 with V_R-EXT = 1.24 V (e.g. 930 Ω → ~20 mA, 1860 Ω → ~10 mA)."
      },
      {
        "number": "24",
        "name": "VDD",
        "type": "power_in",
        "description": "Logic supply, 3.0-3.6 V or 4.5-5.5 V (nominal 3.3 V / 5.0 V). Decouple to GND with a 100 nF ceramic close to the pin plus a bulk capacitor (22 µF typ). Absolute maximum 7 V."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "lcsc": "C261130",
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:08:08Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "mbi5035gp-b.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          8.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "77dd0a1fc7e70e9eda1bfde9dde937dc6e391803cff9978790523c850c85a21d",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "mbi5035gp-b-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          8.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "1c71411992be7d072d9911d28379b5f9d8c13c74d536f1dd5b84b45f90f39f2b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}