component
MBA02040C4702FCT00
Public Made by Adomby adom
Vishay Intertech Through Hole Resistors, 插件,D1.6xL3.6mm. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMBA02040C4702FCT00
Vishay Intertech · Through Hole Resistors · R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal
MBA02040C4702FCT00 from Vishay Intertech, in a R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay Intertech |
| Package | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance tolerance | -1 | 1 | % | Code F = ±1 %; E24/E96 series | 4 | ||
| Temperature coefficient | TCR | -50 | 50 | ppm/K | Code C = ±50 ppm/K; test at (20 / -55 / 20) °C and (20 / 155 / 20) °C | 11 | |
| Resistance range (±1 %, ±50 ppm/K) | R | 1 | 10 | MΩ | ±50 ppm/K, ±1 % tolerance, E24; E96 | 3 | |
| Operating voltage Umax. AC/DC | Umax | 200 | V | AC/DC | 1 | ||
| Rated dissipation | P70 | 0.4 | W | P70 | 1 | ||
| Operating temperature range | -55 | 155 | °C | 1 | |||
| Peak permissible film temperature | 155 | °C | 1 | ||||
| Insulation voltage 1 min | Uins | 300 | V | 1 min. | 1 | ||
| Insulation voltage continuous | 75 | V | Continuous | 1 | |||
| Max resistance change at rated dissipation, standard mode | /ΔR/R/ | 0.25 | % | Standard mode, -55 °C / +125 °C / 56 days; applied film temp 125 °C; 1 Ω to 475 kΩ; 1000 h | 2 | ||
| Max resistance change at rated dissipation, standard mode | /ΔR/R/ | 0.5 | % | Standard mode, -55 °C / +125 °C / 56 days; applied film temp 125 °C; 1 Ω to 475 kΩ; 8000 h | 2 | ||
| Max resistance change at rated dissipation, standard mode | /ΔR/R/ | 1.5 | % | Standard mode, -55 °C / +125 °C / 56 days; applied film temp 125 °C; 1 Ω to 475 kΩ; 225 000 h | 2 | ||
| Short time overload permissible change | -0.1 | 0.1 | % R | Stability class 0.5; ± (0.1 % R + 0.01 Ω); room temperature; U = 2.5 x or U = 2 x Umax.; 5 s | 11 | ||
| Robustness of terminations permissible change | -0.1 | 0.1 | % R | Stability class 0.5; ± (0.1 % R + 0.01 Ω); tensile, bending, torsion | 11 | ||
| Resistance to soldering heat permissible change | -0.1 | 0.1 | % R | Stability class 0.5; ± (0.1 % R + 0.01 Ω); unmounted components; (260 ± 5) °C; (10 ± 1) s | 11 | ||
| Rapid change of temperature permissible change, 5 cycles | -0.1 | 0.1 | % R | Stability class 0.5; ± (0.1 % R + 0.01 Ω); 30 min at -55 °C / 30 min at 155 °C; 5 cycles | 11 | ||
| Rapid change of temperature permissible change, 500 cycles | -0.5 | 0.5 | % R | Stability class 0.5; ± (0.5 % R + 0.05 Ω); MBA/SMA 0204: 500 cycles | 11 | ||
| Vibration permissible change | -0.1 | 0.1 | % R | Stability class 0.5; ± (0.1 % R + 0.01 Ω); 10 sweep cycles per direction; 10 Hz to 2000 Hz; 1.5 mm or 200 m/s2 | 11 | ||
| Climatic sequence damp heat cyclic permissible change | -0.5 | 0.5 | % R | Stability class 0.5; ± (0.5 % R + 0.05 Ω); 55 °C; 5 days; 95 % to 100 % RH; 5 cycles | 11 | ||
| Damp heat steady state permissible change | -0.5 | 0.5 | % R | Stability class 0.5; ± (0.5 % R + 0.05 Ω); (40 ± 2) °C; 56 days; (93 ± 3) % RH | 12 | ||
| Endurance at 70 °C standard mode permissible change, 1000 h | -0.25 | 0.25 | % R | Stability class 0.5; ± (0.25 % R + 0.05 Ω); standard operation mode; 1.5 h on 0.5 h off; 70 °C; 1000 h | 12 | ||
| Endurance at 70 °C standard mode permissible change, 8000 h | -0.5 | 0.5 | % R | Stability class 0.5; ± (0.5 % R + 0.05 Ω); standard operation mode; 1.5 h on 0.5 h off; 70 °C; 8000 h | 12 | ||
| Endurance at 125 °C permissible change, 1000 h | -0.25 | 0.25 | % R | Stability class 0.5; ± (0.25 % R + 0.05 Ω); 125 °C; 1000 h | 12 | ||
| Endurance at 155 °C permissible change, 1000 h | -0.5 | 0.5 | % R | Stability class 0.5; ± (0.5 % R + 0.05 Ω); 155 °C; 1000 h | 12 | ||
| Electrostatic discharge (human body model) | 2 | kV | IEC 61340-3-1; 3 pos. + 3 neg.; MBA/SMA 0204 | 12 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | The resistors are completely lead (Pb)-free, the pure tin plating provides compatibility with lead (Pb)-free and | 7 |
CAD (KiCad official)
- Symbol:
MBA02040C4702FCT00 - Footprint:
Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal - 3D model: R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay Intertech datasheet (15 pp, sha256
bf32f3f51531a596, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).