component
MB85RS64TPNF-G-JNERE2
Public Made by Adomby adom
FUJITSU FRAM, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
mb85rs64tpnf-g-jnere2: laser-etched CAD + chip hero (factory 2.0.0 backfill)
ac45054
MB85RS64TPNF-G-JNERE2
FUJITSU · FRAM · SOP-8
MB85RS64TPNF-G-JNERE2 from FUJITSU, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Chip Select input; L level activates device and H level deactivates device with SO going High-Z. |
| 2 | SO | tri_state | Serial Data Output pin that outputs FRAM array and status register read data with High-Z during standby. |
| 3 | WP | input | Write Protect input pin that controls status register write protection based on WEL and WPEN bits. |
| 4 | VSS | power_in | Ground (0 V) supply pin. |
| 5 | SI | input | Serial Data Input pin for receiving op-code, address, and write data. |
| 6 | SCK | input | Serial Clock input pin that synchronizes SI input on rising edges and SO output on falling edges. |
| 7 | HOLD | input | Hold input pin that suspends serial operation and drives SO to High-Z when held at L level without deselecting device. |
| 8 | VDD | power_in | Supply Voltage input pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FUJITSU |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
MB85RS64TPNF-G-JNERE2 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
mb85rs64tpnf-g-jnere2-etched.step/mb85rs64tpnf-g-jnere2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mb85rs64tpnf-g-jnere2.step/mb85rs64tpnf-g-jnere2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: FUJITSU datasheet (34 pp, sha256
4ca8dcb15e8b4747, retrieved 2026-09-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MB85RS64TPNF-G-JNERE2
**FUJITSU** · FRAM · SOP-8
MB85RS64TPNF-G-JNERE2 from FUJITSU, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Chip Select input; L level activates device and H level deactivates device with SO going High-Z. |
| 2 | SO | tri_state | Serial Data Output pin that outputs FRAM array and status register read data with High-Z during standby. |
| 3 | WP | input | Write Protect input pin that controls status register write protection based on WEL and WPEN bits. |
| 4 | VSS | power_in | Ground (0 V) supply pin. |
| 5 | SI | input | Serial Data Input pin for receiving op-code, address, and write data. |
| 6 | SCK | input | Serial Clock input pin that synchronizes SI input on rising edges and SO output on falling edges. |
| 7 | HOLD | input | Hold input pin that suspends serial operation and drives SO to High-Z when held at L level without deselecting device. |
| 8 | VDD | power_in | Supply Voltage input pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | FUJITSU |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `MB85RS64TPNF-G-JNERE2`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `mb85rs64tpnf-g-jnere2-etched.step` / `mb85rs64tpnf-g-jnere2-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `mb85rs64tpnf-g-jnere2.step` / `mb85rs64tpnf-g-jnere2.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [FUJITSU datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588910066783703040) (34 pp, sha256 `4ca8dcb15e8b4747`, retrieved 2026-09-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/mb85rs64tpnf-g-jnere2-datasheet.pdf)