main
History Download
Ray Publish 0.1.0 a4aaf62

MAX998ESA+

Analog Devices Inc./Maxim Integrated · IC · SO-8

MAX998ESA+ from Analog Devices Inc./Maxim Integrated, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 N.C. unconnected No connection; not internally connected.
2 IN- input Comparator inverting input; common-mode voltage range is -0.2V to (VCC - 1.2V).
3 IN+ input Comparator noninverting input; common-mode voltage range is -0.2V to (VCC - 1.2V).
4 GND power_in Ground.
5 N.C. unconnected No connection; not internally connected.
6 OUT output Comparator output; push/pull rail-to-rail output that tolerates a continuous short-circuit fault to either supply.
7 VCC power_in Supply voltage, +2.7V to +5.5V.
8 SHDN input Shutdown input; drive low for shutdown mode, drive high or connect to VCC for normal operation, maximum 6V referred to GND.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package SO-8
Category
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VCC 2.7 5.5 V 2
Operating Temperature Range TA -40 85 °C 2
Supply Voltage VCC 6 V 2
SHDN Pin Voltage SHDN -0.3 6 V MAX998 SHDN pin 2
Current into Input Pins -20 20 mA 2
Storage Temperature Range -65 160 °C 2
Lead Temperature (soldering, 10s) 300 °C soldering, 10s 2
Soldering Temperature (reflow) 260 °C reflow 2
Derating above +70°C (8-Pin SO) 5.88 mW/°C derate above +70°C 2
Supply Voltage Range VCC 2.7 5.5 V 2
Input Offset Current IOS -100 5 100 nA 2
Input Offset Voltage VOS -2 0.2 2 mV VCC = 5V (Note 3), TA = +25°C 2
Input Offset Voltage over temperature VOS -3 3 mV TA = TMIN to TMAX 2
Input-Referred Hysteresis VHYS 0.5 1.5 4 mV VCC = 5V (Note 4) 2
Shutdown Supply Current ISD 1 500 nA MAX998 only, SHDN = GND 2
Power-Supply Rejection Ratio PSRR 63 100 dB Inferred from PSRR test 2
Common-Mode Rejection Ratio CMRR 66 95 dB -0.2V ≤ VCM ≤ (VCC - 1.2V) 2
Common-Mode Voltage Range low limit VCMR -0.2 V (Note 2); upper limit VCC - 1.2 2
OUT Output-Voltage Low VOL 0.1 0.4 V ISINK = 2mA 2
OUT Output-Voltage High (VCC - VOH) VOH 0.1 0.4 V ISOURCE = 2mA; value printed as VCC - VOH 2
Propagation Delay tPD 20 40 ns Overdrive = 50mV 2
Propagation-Delay Skew tSKEW 2 ns CLOAD = 10pF (Note 6) 2
Output Rise/Fall Time tR/tF 1.6 ns CLOAD = 10pF 2
Input Capacitance CIN 3 pF 2
SHDN Input-Voltage High VIH 0.65 V MAX998 only; printed as 0.65 x VCC 2
SHDN Input-Voltage Low VIL 0.2 V MAX998 only; printed as 0.2 x VCC 2
OUT Leakage Current IOUT 1 200 nA MAX998 only, SHDN = GND, VOUT = 0V to VCC 2
SHDN Input Current ISHDN 1 200 nA MAX998 only 2
Supply Current per Comparator ICC 225 µA 2
Input Bias Current IB 75 300 nA 2
Power-Up Delay tPU 3 µs VCC = 0V to 5V step, output valid 3
Wake-Up from Shutdown tEN 15 µs MAX998 only, VCC = 5V, ICC = 90% of typical (Note 7) 3

CAD (KiCad official)

  • Symbol: MAX998ESA+
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: max998esa-etched.step / max998esa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max998esa.step / max998esa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (10 pp, sha256 95d121a24146c28b, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF