3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX9912EKA+T
Maxim Integrated · Operational Amplifier · SOT-23-8
MAX9912EKA+T from Maxim Integrated, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Channel A amplifier output, which swings to within 5mV of both rails with a 100kΩ load and to within 60mV with a 5kΩ load. |
| 2 | INA- | input | Channel A inverting amplifier input, whose common-mode range extends 100mV beyond the supply rails. |
| 3 | INA+ | input | Channel A noninverting amplifier input, whose common-mode range extends 100mV beyond the supply rails. |
| 4 | VSS | power_in | Negative supply voltage, normally 0V for single-supply operation from 1.8V to 5.5V. |
| 5 | INB+ | input | Channel B noninverting amplifier input, whose common-mode range extends 100mV beyond the supply rails. |
| 6 | INB- | input | Channel B inverting amplifier input, whose common-mode range extends 100mV beyond the supply rails. |
| 7 | OUTB | output | Channel B amplifier output, which swings to within 5mV of both rails with a 100kΩ load and to within 60mV with a 5kΩ load. |
| 8 | VDD | power_in | Positive supply voltage, specified from 1.8V to 5.5V with absolute maximum of +6.0V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOT-23-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VDD | 1.8 | 5.5 | V | Guaranteed by PSRR test | 2 | |
| Supply Current | IDD | 7 | 9 | µA | MAX9912/MAX9913, VDD = 5.5V | 2 | |
| Supply Current | IDD | 7 | µA | MAX9912/MAX9913, VDD = 1.8V | 2 | ||
| Input Offset Voltage | VOS | -1 | 0.2 | 1 | mV | 2 | |
| Input-Offset-Voltage Matching | -250 | 250 | µV | MAX9912/MAX9913 | 2 | ||
| Input Bias Current | IB | -10 | 1 | 10 | pA | Note 2 | 2 |
| Input Offset Current | IOS | -10 | 1 | 10 | pA | Note 2 | 2 |
| Input Resistance | RIN | 10 | GΩ | Differential mode, -1mV < VIN < +1mV | 2 | ||
| Input Common-Mode Range | VCM | -0.1 | 0.1 | V | Guaranteed by CMRR test; min = VSS - 0.1, max = VDD + 0.1 | 2 | |
| Common-Mode Rejection Ratio | CMRR | 70 | 80 | dB | -0.1V < VCM < VDD + 0.1V, VDD = 5.5V | 2 | |
| Power-Supply Rejection Ratio | PSRR | 65 | 95 | dB | 1.8V < VDD < 5.5V | 2 | |
| Open-Loop Gain | AVOL | 95 | 120 | dB | 25mV < VOUT < VDD - 25mV, RL = 100kΩ, VDD = 5.5V | 2 | |
| Open-Loop Gain | AVOL | 95 | 110 | dB | 100mV < VOUT < VDD - 100mV, RL = 5kΩ, VDD = 5.5V | 2 | |
| Output-Voltage-Swing High | VOH | 2.5 | 5 | mV | RL = 100kΩ | 2 | |
| Output-Voltage-Swing High | VOH | 50 | 70 | mV | RL = 5kΩ | 2 | |
| Output-Voltage-Swing High | VOH | 250 | mV | RL = 1kΩ | 2 | ||
| Output-Voltage-Swing Low | VOL | 2.5 | 5 | mV | RL = 100kΩ | 2 | |
| Output-Voltage-Swing Low | VOL | 50 | 70 | mV | RL = 5kΩ | 2 | |
| Output-Voltage-Swing Low | VOL | 250 | mV | RL = 1kΩ | 2 | ||
| Channel-to-Channel Isolation | CHISO | 100 | dB | Specified at DC, MAX9912/MAX9913 | 2 | ||
| Output Short-Circuit Current | IOUT(SC) | -15 | 15 | mA | 2 | ||
| Gain-Bandwidth Product | GBW | 200 | kHz | 3 | |||
| Slew Rate | SR | 0.1 | V/µs | 3 | |||
| Input Voltage-Noise Density | en | 400 | nV/√Hz | f = 1kHz | 3 | ||
| Settling Time | tS | 18 | µs | To 0.1%, VOUT = 2V step, AV = -1V/V | 3 | ||
| Power-Up Time | 5 | µs | VDD = 0 to 5.5V step | 3 | |||
| Supply Voltage Range | VDD | 1.8 | 5.5 | V | -40°C to +85°C; guaranteed by PSRR test | 3 | |
| Supply Current | IDD | 11 | µA | -40°C to +85°C, MAX9912/MAX9913, VDD = 5.5V | 3 | ||
| Input Offset Voltage | VOS | -5 | 5 | mV | -40°C to +85°C | 3 | |
| Input-Offset-Voltage Temperature Coefficient | TCVOS | -5 | 5 | µV/°C | -40°C to +85°C | 3 | |
| Input Bias Current | IB | -30 | 30 | pA | -40°C to +85°C | 4 | |
| Input Offset Current | IOS | -20 | 20 | pA | -40°C to +85°C | 4 | |
| Input Common-Mode Range | VCM | -0.05 | 0.05 | V | -40°C to +85°C, guaranteed by CMRR test; min = VSS - 0.05, max = VDD + 0.05 | 4 | |
| Common-Mode Rejection Ratio | CMRR | 60 | dB | -40°C to +85°C, -0.05V < VCM < VDD + 0.05V, VDD = 5.5V | 4 | ||
| Power-Supply Rejection Ratio | PSRR | 59 | dB | -40°C to +85°C, 1.8V < VDD < 5.5V | 4 | ||
| Open-Loop Gain | AVOL | 85 | dB | -40°C to +85°C, 25mV < VOUT < VDD - 25mV, RL = 100kΩ, VDD = 5.5V | 4 | ||
| Open-Loop Gain | AVOL | 80 | dB | -40°C to +85°C, 150mV < VOUT < VDD - 150mV, RL = 5kΩ, VDD = 5.5V | 4 | ||
| Output-Voltage-Swing High | VOH | 5 | mV | -40°C to +85°C, RL = 100kΩ | 4 | ||
| Output-Voltage-Swing High | VOH | 90 | mV | -40°C to +85°C, RL = 5kΩ | 4 | ||
| Output-Voltage-Swing Low | VOL | 5 | mV | -40°C to +85°C, RL = 100kΩ | 4 | ||
| Output-Voltage-Swing Low | VOL | 90 | mV | -40°C to +85°C, RL = 5kΩ | 4 | ||
| Power-Supply Voltage (VDD to VSS) | VDD | -0.3 | 6 | V | 2 | ||
| Input/Output Voltage (IN_+, IN_-, OUT_, SHDN_) | -0.3 | 0.3 | V | Relative to VSS and VDD: (VSS - 0.3V) to (VDD + 0.3V) | 2 | ||
| Current into IN_+, IN_- | -20 | 20 | mA | 2 | |||
| Continuous Power Dissipation (8-Pin SOT23) | PD | 727 | mW | TA = +70°C, derate 9.1mW/°C above +70°C | 2 | ||
| Operating Temperature Range | TA | -40 | 85 | °C | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | TSTORE | -65 | 150 | °C | 2 | ||
| Lead Temperature (soldering 10s) | 300 | °C | Excluding WLP | 2 | |||
| Soldering Temperature (reflow) | 260 | °C | Lead(Pb)-free packages | 2 |
CAD (KiCad official)
- Symbol:
MAX9912EKA+T - Footprint:
Package_TO_SOT_SMD:SOT-23-8 - 3D model: SOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
max9912eka-t-etched.step/max9912eka-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max9912eka-t.step/max9912eka-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (17 pp, sha256
c1bb06d21a26a67f, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).