Generated by kicad-footprint-generator · KiCad file format 20260206
MAX98400BETG+T
Analog Devices Inc./Maxim Integrated · Audio Power OpAmps · TQFN-24(4x4)
MAX98400BETG+T from Analog Devices Inc./Maxim Integrated, in a TQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTL- | output | Negative left speaker output of the class D bridge, which the datasheet describes as the negative left speaker output. |
| 2 | OUTL- | output | Negative left speaker output of the class D bridge, which the datasheet describes as the negative left speaker output. |
| 3 | OUTL+ | output | Positive left speaker output of the class D bridge. |
| 4 | VS | power_in | 5V regulator supply that must be bypassed to GND with a 1μF capacitor and can be connected to a +5V source for dual-supply operation. |
| 5 | G1 | tri_state | Three-state input for gain selection 1, see the Detailed Description section. |
| 6 | G2 | tri_state | Three-state input for gain selection 2, see the Detailed Description section. |
| 7 | LIM_TH | input | Limiter threshold control: connect to VS to disable the limiter, to GND for no clipping, or to a resistor or resistor divider for PVDD-tracking or absolute threshold. |
| 8 | INL+ | input | Left-channel positive analog input. |
| 9 | INL- | input | Left-channel negative analog input. |
| 10 | GND | power_in | Analog ground. |
| 11 | INR- | input | Right-channel negative analog input. |
| 12 | INR+ | input | Right-channel positive analog input. |
| 13 | TEMPLOCK | input | Thermal foldback control: connect to GND to disable thermal foldback or leave open to enable it. |
| 14 | RELEASE | passive | Sets the limiter time constant and is connected to GND through 1μF. |
| 15 | SHDN | input | Active-low shutdown input, where low = shutdown and high = enable. |
| 16 | OUTR+ | output | Positive right speaker output of the class D bridge. |
| 17 | OUTR- | output | Negative right speaker output of the class D bridge. |
| 18 | OUTR- | output | Negative right speaker output of the class D bridge. |
| 19 | PGND | power_in | Power ground for the output stage. |
| 20 | PGND | power_in | Power ground for the output stage. |
| 21 | PVDD | power_in | Power supply, to be bypassed to PGND with 1μF and 200μF capacitors. |
| 22 | PVDD | power_in | Power supply, to be bypassed to PGND with 1μF and 200μF capacitors. |
| 23 | PGND | power_in | Power ground for the output stage. |
| 24 | PGND | power_in | Power ground for the output stage. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | TQFN-24(4x4) |
| Category | Operational Amplifier/Comparator |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| PVDD to PGND | -0.3 | 30 | V | 4 | |||
| VS to GND | VS | -0.3 | 6 | V | 4 | ||
| SHDN, MONO to GND | -0.3 | 6 | V | 4 | |||
| IN_ to GND | -0.3 | 6 | V | 4 | |||
| G1, G2, RELEASE, TEMPLOCK, LIM_TH to GND | -0.3 | V | max = VS + 0.3V | 4 | |||
| OUT_ to PGND | -0.3 | V | max = VPVDD + 0.3V | 4 | |||
| PGND to GND | -0.3 | 0.3 | V | 4 | |||
| Continuous Current into OUT_ | 2.4 | A | 4 | ||||
| Continuous Current into PVDD, PGND | 4.8 | A | 4 | ||||
| Continuous Current into All Other Pins | 10 | mA | 4 | ||||
| Continuous Power Dissipation | 35.7 | mW | 24-Pin TQFN multilayer board, TA = +70°C (derate 27.8mW/°C above +70°C) | 4 | |||
| Junction Temperature | 150 | °C | 4 | ||||
| Operating Temperature Range | -40 | 85 | °C | 4 | |||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Lead Temperature (soldering, 10s) | 300 | °C | 4 | ||||
| Soldering Temperature (reflow) | 260 | °C | 4 | ||||
| Thermal resistance junction-to-ambient | θJA | 36 | °C/W | 24-Pin TQFN multilayer board (Note 1) | 4 | ||
| Thermal resistance junction-to-case | θJC | 3 | °C/W | 24-Pin TQFN multilayer board (Note 1) | 4 | ||
| PVDD Supply Voltage Range | VPVDD | 8 | 28 | V | Inferred from PVDD_PSRR | 4 | |
| VS Supply Input Voltage | VS | 4.75 | 5.5 | V | Inferred from IVS test | 4 | |
| Quiescent Current IPVDD (dual-supply) | IPVDD | 10 | 15 | mA | Dual-supply mode: VS = 4.75V, TA = +25°C | 4 | |
| Quiescent Current IVS (dual-supply) | IVS | 6 | 8.2 | mA | Dual-supply mode: VS = 4.75V, TA = +25°C | 4 | |
| Single-Supply Quiescent Current | IPVDD | 16 | 23 | mA | Single-supply mode: TA = +25°C | 4 | |
| Single-Supply Quiescent Current with load | IPVDD | 17 | mA | Single-supply mode, RL = 8Ω (Note 3) | 4 | ||
| Shutdown Current | ISHDN_PVDD | 8 | 20 | μA | VSHDN = 0V, TA = +25°C, VS = 5.5V | 4 | |
| Shutdown Current | ISHDN_VS | 3 | 10 | μA | VSHDN = 0V, TA = +25°C, VS = 5.5V | 4 | |
| PVDD Undervoltage Lockout | VUVLO | 7 | 7.9 | V | 4 | ||
| VS Regulator Output Voltage | VS | 4.2 | 4.47 | 4.75 | V | 4 | |
| Common-Mode Rejection Ratio | CMRR | 60 | dB | 4 | |||
| Input Resistance Differential | 20 | 32 | kΩ | VLIM_TH = 0V, gain = +35dB | 4 | ||
| Gain Accuracy | -4 | 0.8 | 4 | % | 5 | ||
| Left-to-Right Gain Matching | -2 | 2 | % | All gain settings | 5 | ||
| Output Offset Voltage | VOS | -45 | 8 | 45 | mV | TA = +25°C | 5 |
| PVDD Power-Supply Rejection Ratio | PSRRPVDD | 52 | 63 | dB | VPVDD = 8V to 28V | 5 | |
| VS Power-Supply Rejection Ratio | PSRRVS | 39 | 55 | dB | VS = 4.75V to 5.5V | 5 | |
| Current Limit | ILIM | 3.5 | 5 | A | 5 | ||
| Switching Frequency | fSW | 265 | 330 | 395 | kHz | 5 | |
| Peak Output Voltage | 20 | 26 | V | VPVDD = 28V | 5 | ||
| Attack Time | 240 | 500 | μs | VLIM_TH = 0V | 5 | ||
| Shutdown to Full Operation | tSON | 11 | ms | 5 | |||
| Maximum Trigger Level | 4 | dBFS | VPVDD = 14V (Note 6) | 5 | |||
| Minimum Trigger Level | -6 | dBFS | (Note 7) | 5 | |||
| Trigger Level | -1 | 0 | 1 | dBFS | VLIM_TH = 0V | 5 | |
| Compression Range | -12 | dB | VLIM_TH = 0V | 5 | |||
| Output Noise | VN | 100 | μVRMS | A-weighted | 5 | ||
| Total Harmonic Distortion Plus Noise | THD+N | 0.3 | % | POUT = 0.1W to POUT/2, fIN = 20Hz to 20kHz, RL = 8Ω | 5 | ||
| Output FET Resistance | RDSON | 0.4 | Ω | 5 | |||
| MAX98400B Output Power | POUT | 15 | W | Stereo, RL = 8Ω, 10% THD+N, fIN = 1kHz (Note 3) | 5 | ||
| VGA Distortion | 3.5 | % | Compression = 0 to -12dB | 6 | |||
| Channel-to-Channel Attenuation Tracking | -1 | 1 | dB | 6 | |||
| LIM_TH Input-Voltage Low (PVDD Tracking) | 0.15 | V | 6 | ||||
| Internal Templock Resistor | 120 | 205 | 310 | kΩ | 6 | ||
| Trigger Temperature | 130 | °C | 6 | ||||
| Hard Thermal Protection | 165 | °C | 6 | ||||
| Sink Current (G1, G2) | 2.5 | 5 | 8 | μA | TA = +25°C, VG1, VG2 = 0V | 6 | |
| Source Current (G1, G2) | -8 | -5 | -2.5 | μA | TA = +25°C, VG1, VG2 = VS | 6 | |
| Input Leakage Current (SHDN) | IIN | -10 | 10 | μA | TA = +25°C | 6 | |
| Input High Threshold (SHDN) | VINH | 2 | V | 6 | |||
| Input Low Threshold (SHDN) | VINL | 0.4 | V | 6 | |||
| Input-Voltage Hysteresis (SHDN) | 100 | mV | 6 |
CAD (KiCad official)
- Symbol:
MAX98400BETG+T - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: TQFN-24(4x4) (KiCad packages3D, STEP)
- 3D model files:
max98400betg-t-etched.step/max98400betg-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max98400betg-t.step/max98400betg-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (27 pp, sha256
41d422071d974adb, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).