3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX98358ETE+T
Maxim Integrated · Audio Power OpAmps · TQFN-16(3x3)
MAX98358ETE+T from Maxim Integrated, in a TQFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PDM_DATA | input | Digital PDM input signal; stereo data is read on the rising (left) and falling (right) edges of PDM_CLK. |
| 2 | GAIN | input | Amplifier gain select: GND through 100kΩ = 15dB, GND = 12dB, unconnected = 9dB, VDD = 6dB, VDD through 100kΩ = 3dB. |
| 3 | GND | power_in | Ground. |
| 4 | SD_MODE | input | Shutdown and channel select; determines left, right, or (left/2 + right/2) mix and is also used for shutdown (see Table 5). |
| 5 | N.C. | unconnected | No connection. |
| 6 | N.C. | unconnected | No connection. |
| 7 | VDD | power_in | Power-supply input, 2.5V to 5.5V operation. |
| 8 | VDD | power_in | Power-supply input, 2.5V to 5.5V operation. |
| 9 | OUTP | output | Positive speaker amplifier output. |
| 10 | OUTN | output | Negative speaker amplifier output. |
| 11 | GND | power_in | Ground. |
| 12 | N.C. | unconnected | No connection. |
| 13 | N.C. | unconnected | No connection. |
| 14 | GND | power_in | Ground. |
| 15 | GND | power_in | Ground. |
| 16 | PDM_CLK | input | PDM bit clock input supporting 1.84MHz-4.32MHz and 5.28MHz-8.64MHz. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | TQFN-16(3x3) |
| Category | Operational Amplifier/Comparator |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VDD | 2.5 | 5.5 | V | Guaranteed by PSSR test | 4 | |
| Undervoltage Lockout | UVLO | 1.4 | 1.8 | 2.3 | V | 4 | |
| Quiescent Current | IDD | 2.2 | 2.7 | mA | TA = +25°C | 4 | |
| Quiescent Current | IDD | 1.8 | 2.2 | mA | TA = +25°C, VDD = 3.7V | 4 | |
| Shutdown Current | ISHDN | 0.6 | 2 | µA | SD_MODE = 0V, TA = +25°C | 4 | |
| Standby Current | ISTNDBY | 340 | 400 | µA | SD_MODE = 1.8V, no PDM_CLK, TA = +25°C | 4 | |
| Turn-On Time | tON | 0.6 | 0.7 | ms | Time from receipt of first clock cycle to full operation | 4 | |
| Output Offset Voltage | VOS | -2.5 | 0.3 | 2.5 | mV | TA = +25°C, gain = 15dB | 4 |
| Power-Supply Rejection Ratio | PSRR | 60 | 75 | dB | VDD = 2.5V to 5.5V, TA = +25°C | 4 | |
| Gain 15dB | AV | 14.4 | 15 | 15.6 | dB | GAIN = GND through 100kΩ | 5 |
| Gain 12dB | AV | 11.4 | 12 | 12.6 | dB | GAIN = GND | 5 |
| Gain 9dB | AV | 8.4 | 9 | 9.6 | dB | GAIN = unconnected | 5 |
| Gain 6dB | AV | 5.4 | 6 | 6.6 | dB | GAIN = VDD | 5 |
| Gain 3dB | AV | 2.4 | 3 | 3.6 | dB | GAIN = VDD through 100kΩ | 5 |
| PDM_CLK High Frequency Range | fCLKH | 5.28 | 8.64 | MHz | 5 | ||
| PDM_CLK Low Frequency Range | fCLKL | 1.84 | 4.32 | MHz | 5 | ||
| PDM_CLK High Time | tPDM_CLKH | 40 | ns | 5 | |||
| PDM_CLK Low Time | tPDM_CLKL | 40 | ns | 5 | |||
| Maximum Low-Frequency PDM_CLK Jitter | 0.5 | ns | RMS jitter below 40kHz | 5 | |||
| Maximum Low-Frequency PDM_CLK Jitter | 12 | ns | RMS jitter above 40kHz | 5 | |||
| Input High Voltage | VIH | 1.3 | V | Digital audio inputs | 6 | ||
| Input Low Voltage | VIL | 0.6 | V | Digital audio inputs | 6 | ||
| Input Leakage Current | IIH, IIL | -1 | 1 | µA | VIN = 0V, VDD = 5.5V, TA = +25°C | 6 | |
| PDM_DATA to PDM_CLK Setup Time | tSETUP | 10 | ns | 6 | |||
| PDM_DATA to PDM_CLK Hold Time | tHOLD | 10 | ns | 6 | |||
| SD_MODE Comparator Trip Point B0 | B0 | 0.08 | 0.16 | 0.355 | V | See SD_MODE and shutdown operation for details | 6 |
| SD_MODE Comparator Trip Point B1 | B1 | 0.65 | 0.77 | 0.825 | V | See SD_MODE and shutdown operation for details | 6 |
| SD_MODE Comparator Trip Point B2 | B2 | 1.245 | 1.4 | 1.5 | V | See SD_MODE and shutdown operation for details | 6 |
| SD_MODE Pulldown Resistor | RPD | 92 | 100 | 108 | kΩ | 6 | |
| Output Power THD+N 10%, 4Ω+33µH | POUT | 3.2 | W | THD+N 10%, ZSPK = 4Ω + 33µH | 5 | ||
| Output Power THD+N 10%, 8Ω+68µH | POUT | 1.8 | W | THD+N 10%, ZSPK = 8Ω + 68µH | 5 | ||
| Output Power THD+N 1%, 4Ω+33µH | POUT | 2.5 | W | THD+N = 1%, ZSPK = 4Ω + 33µH | 5 | ||
| Output Power THD+N 1%, 8Ω+68µH | POUT | 1.4 | W | THD+N = 1%, ZSPK = 8Ω + 68µH | 5 | ||
| Total Harmonic Distortion + Noise | THD+N | 0.02 | % | f = 1kHz, POUT = 1W, TA = +25°C, ZSPK = 4Ω + 33µH (TQFN) | 5 | ||
| Dynamic Range | DR | 99 | dB | A-weighted, PDM_CLK = 6.144MHz, VRMS = 2.54V | 5 | ||
| Output Noise | VN | 29 | µVRMS | A-weighted (Note 4) | 5 | ||
| Current Limit | ILIM | 2.8 | A | 5 | |||
| Efficiency | η | 92 | % | ZSPK = 8Ω + 68µH, THD+N = 10%, f = 1kHz, gain = 12dB | 5 | ||
| Class D Oscillator Frequency | fOSC | 330 | kHz | 5 | |||
| Supply and PDM_CLK/PDM_DATA Voltage to GND | -0.3 | 6 | V | VDD, PDM_CLK and PDM_DATA to GND | 4 | ||
| Other Pins to GND | -0.3 | V | All other pins to GND, max is VDD + 0.3V | 4 | |||
| Continuous Current In/Out of VDD/GND/OUT_ | -1.6 | 1.6 | A | 4 | |||
| Continuous Input Current (all other pins) | -20 | 20 | mA | 4 | |||
| Junction Temperature | TJ | 150 | °C | 4 | |||
| Operating Temperature Range | TA | -40 | 85 | °C | 4 | ||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Soldering Temperature (reflow) | 260 | °C | 4 | ||||
| Lead Temperature (soldering, 10s, TQFN) | 300 | °C | 4 | ||||
| Junction-to-Case Thermal Resistance TQFN | θJC | 7 | °C/W | TQFN | 4 |
CAD (KiCad official)
- Symbol:
MAX98358ETE+T - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: TQFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
max98358ete-t-etched.step/max98358ete-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max98358ete-t.step/max98358ete-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (28 pp, sha256
449b78c68d021602, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).