main
Ray
Publish 0.1.0
dca0155
MAX976EUA+
Maxim Integrated · Comparators · MSOP-8
MAX976EUA+ from Maxim Integrated, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Comparator A push/pull rail-to-rail output that tolerates a continuous short circuit to either supply. |
| 2 | INA- | input | Comparator A inverting input with a common-mode range of -0.2V to (VCC - 1.2V). |
| 3 | INA+ | input | Comparator A noninverting input with a common-mode range of -0.2V to (VCC - 1.2V). |
| 4 | GND | power_in | Ground. |
| 5 | INB+ | input | Comparator B noninverting input with a common-mode range of -0.2V to (VCC - 1.2V). |
| 6 | INB- | input | Comparator B inverting input with a common-mode range of -0.2V to (VCC - 1.2V). |
| 7 | OUTB | output | Comparator B push/pull rail-to-rail output that tolerates a continuous short circuit to either supply. |
| 8 | VCC | power_in | Supply voltage, +2.7V to +5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | MSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | 2.7 | 5.5 | V | 2 | ||
| Common-Mode Voltage Range | VCMR | -0.2 | V | (Note 2); printed maximum is VCC - 1.2V | 2 | ||
| Common-Mode Rejection Ratio | CMRR | 66 | 95 | dB | -0.2V ≤ VCM ≤ (VCC - 1.2V) | 2 | |
| Power-Supply Rejection Ratio | PSRR | 63 | 100 | dB | 2 | ||
| Input Offset Voltage | VOS | -2 | 0.2 | 2 | mV | VCC = 5V (Note 3), TA = +25°C | 2 |
| Input Offset Voltage over temperature | VOS | -3 | 3 | mV | TA = TMIN to TMAX | 2 | |
| Input Offset Current | IOS | -100 | 5 | 100 | nA | 2 | |
| Input Bias Current | IB | 75 | 300 | nA | 2 | ||
| Input-Referred Hysteresis | VHYS | 0.5 | 1.5 | 4 | mV | 2 | |
| OUT Output-Voltage Low | VOL | 0.1 | 0.4 | V | ISINK = 2mA | 2 | |
| OUT Output-Voltage High (VCC - VOH) | VOH | 0.1 | 0.4 | V | ISOURCE = 2mA | 2 | |
| Propagation Delay | tPD | 20 | 40 | ns | Overdrive = 50mV | 2 | |
| Supply Voltage (absolute maximum) | VCC | 6 | V | 2 | |||
| Current into Input Pins | -20 | 20 | mA | 2 | |||
| Operating Temperature Range | TA | -40 | 85 | °C | 2 | ||
| Storage Temperature Range | TSTG | -65 | 160 | °C | 2 | ||
| Lead Temperature | 300 | °C | soldering, 10s | 2 | |||
| Soldering Temperature (reflow) | 260 | °C | 2 |
CAD (KiCad official)
- Symbol:
MAX976EUA+ - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
max976eua-etched.step/max976eua-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max976eua.step/max976eua.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (10 pp, sha256
95d121a24146c28b, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX976EUA+
**Maxim Integrated** · Comparators · MSOP-8
MAX976EUA+ from Maxim Integrated, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Comparator A push/pull rail-to-rail output that tolerates a continuous short circuit to either supply. |
| 2 | INA- | input | Comparator A inverting input with a common-mode range of -0.2V to (VCC - 1.2V). |
| 3 | INA+ | input | Comparator A noninverting input with a common-mode range of -0.2V to (VCC - 1.2V). |
| 4 | GND | power_in | Ground. |
| 5 | INB+ | input | Comparator B noninverting input with a common-mode range of -0.2V to (VCC - 1.2V). |
| 6 | INB- | input | Comparator B inverting input with a common-mode range of -0.2V to (VCC - 1.2V). |
| 7 | OUTB | output | Comparator B push/pull rail-to-rail output that tolerates a continuous short circuit to either supply. |
| 8 | VCC | power_in | Supply voltage, +2.7V to +5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | MSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | 2.7 | | 5.5 | V | | 2 |
| Common-Mode Voltage Range | VCMR | -0.2 | | | V | (Note 2); printed maximum is VCC - 1.2V | 2 |
| Common-Mode Rejection Ratio | CMRR | 66 | 95 | | dB | -0.2V ≤ VCM ≤ (VCC - 1.2V) | 2 |
| Power-Supply Rejection Ratio | PSRR | 63 | 100 | | dB | | 2 |
| Input Offset Voltage | VOS | -2 | 0.2 | 2 | mV | VCC = 5V (Note 3), TA = +25°C | 2 |
| Input Offset Voltage over temperature | VOS | -3 | | 3 | mV | TA = TMIN to TMAX | 2 |
| Input Offset Current | IOS | -100 | 5 | 100 | nA | | 2 |
| Input Bias Current | IB | | 75 | 300 | nA | | 2 |
| Input-Referred Hysteresis | VHYS | 0.5 | 1.5 | 4 | mV | | 2 |
| OUT Output-Voltage Low | VOL | | 0.1 | 0.4 | V | ISINK = 2mA | 2 |
| OUT Output-Voltage High (VCC - VOH) | VOH | | 0.1 | 0.4 | V | ISOURCE = 2mA | 2 |
| Propagation Delay | tPD | | 20 | 40 | ns | Overdrive = 50mV | 2 |
| Supply Voltage (absolute maximum) | VCC | | | 6 | V | | 2 |
| Current into Input Pins | | -20 | | 20 | mA | | 2 |
| Operating Temperature Range | TA | -40 | | 85 | °C | | 2 |
| Storage Temperature Range | TSTG | -65 | | 160 | °C | | 2 |
| Lead Temperature | | | | 300 | °C | soldering, 10s | 2 |
| Soldering Temperature (reflow) | | | | 260 | °C | | 2 |
## CAD (KiCad official)
- Symbol: `MAX976EUA+`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `max976eua-etched.step` / `max976eua-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max976eua.step` / `max976eua.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/max976-max998.pdf) (10 pp, sha256 `95d121a24146c28b`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max976eua-datasheet.pdf)