main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers max9744eth: viewers · Ray
max9744eth-etched.glb max9744eth: factory component page (tier=mfr) · Ray
max9744eth-etched.step max9744eth: factory component page (tier=mfr) · Ray
max9744eth-hero.glb max9744eth: hero GLB from the etched model (keeps the MPN mark) · Ray
max9744eth-hero.overlay.json max9744eth: hero GLB from the etched model (keeps the MPN mark) · Ray
max9744eth.glb Publish 0.1.0 · Ray
max9744eth.kicad_mod Publish 0.1.0 · Ray
max9744eth.kicad_sym Publish 0.1.0 · Ray
max9744eth.lbr Publish 0.1.0 · Ray
max9744eth.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md max9744eth: the pins were read twice by one model (sonnet); say so instead of 'cross-checked by two models' · Ray
verification.json Verified: Published by the parts factory: tier mfr, 45 pins · Ray

MAX9744ETH+

Maxim Integrated · Audio Power OpAmps · TQFN-44(7x7)

MAX9744ETH+ from Maxim Integrated, in a TQFN-44(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOTL+ passive Left-channel positive speaker output boost flying-capacitor connection; connect a 0.1µF ceramic capacitor between BOOTL+ and OUTL+.
2 OUTL+ output Left-channel speaker output, positive phase.
3 OUTL+ output Left-channel speaker output, positive phase.
4 PVDD power_in Speaker amplifier power-supply input (4.5V to 14V); bypass with a 1µF capacitor to PGND.
5 PVDD power_in Speaker amplifier power-supply input (4.5V to 14V); bypass with a 1µF capacitor to PGND.
6 VDD power_in Power-supply input; bypass with a 1µF capacitor to GND.
7 GND power_in Ground.
8 SDA/VOL bidirectional I2C serial data I/O and analog volume control input.
9 SCLK/PWM input I2C serial clock input when ADDR1 and ADDR2 are not GND; with ADDR1 and ADDR2 at GND, SCLK = 1 selects standard PWM output and SCLK = 0 selects filterless modulation.
10 VDD power_in Power-supply input; bypass with a 1µF capacitor to GND.
11 GND power_in Ground.
12 GND power_in Ground.
13 ADDR1 input Address select input 1 setting the I2C device address; connect ADDR1 and ADDR2 to GND to select analog volume control mode.
14 ADDR2 input Address select input 2 setting the I2C device address; connect ADDR1 and ADDR2 to GND to select analog volume control mode.
15 GND power_in Ground.
16 INL input Left-channel audio input.
17 FBL output Left-channel feedback; connect a feedback resistor between FBL and INL to set amplifier gain.
18 FBR output Right-channel feedback; connect a feedback resistor between FBR and INR to set amplifier gain.
19 INR input Right-channel audio input.
20 BIAS output Common-mode bias voltage; bypass with a 2.2µF capacitor to GND.
21 VDD power_in Power-supply input; bypass with a 1µF capacitor to GND.
22 SHDN input Shutdown input; drive low to disable the audio amplifiers, connect to VDD or drive high for normal operation.
23 N.C. unconnected No connection; not internally connected.
24 MUTE input Mute input; drive high to mute the speaker outputs, connect to GND for normal operation.
25 SYNC input Frequency select and external clock input: GND = fixed 1200kHz, unconnected = fixed 1440kHz, VDD = spread-spectrum 1200kHz ±30kHz, clocked = external frequency with fSW = 1/4 fSYNC.
26 SYNCOUT output SYNC signal output.
27 GND power_in Ground.
28 VDD power_in Power-supply input; bypass with a 1µF capacitor to GND.
29 PVDD power_in Speaker amplifier power-supply input (4.5V to 14V); bypass with a 1µF capacitor to PGND.
30 PVDD power_in Speaker amplifier power-supply input (4.5V to 14V); bypass with a 1µF capacitor to PGND.
31 OUTR+ output Right-channel positive speaker output.
32 OUTR+ output Right-channel positive speaker output.
33 BOOTR+ passive Right-channel positive speaker output boost flying-capacitor connection; connect a 0.1µF ceramic capacitor between BOOTR+ and OUTR+.
34 PGND power_in Power ground.
35 PGND power_in Power ground.
36 OUTR- output Right-channel negative speaker output.
37 OUTR- output Right-channel negative speaker output.
38 BOOTR- passive Right-channel negative speaker output boost flying-capacitor connection; connect a 0.1µF ceramic capacitor between BOOTR- and OUTR-.
39 PGND power_in Power ground.
40 BOOTL- passive Left-channel negative speaker output boost flying-capacitor connection; connect a 0.1µF ceramic capacitor between BOOTL- and OUTL-.
41 OUTL- output Left-channel negative speaker output.
42 OUTL- output Left-channel negative speaker output.
43 PGND power_in Power ground.
44 PGND power_in Power ground.
45 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package TQFN-44(7x7)
Category Operational Amplifier/Comparator
Pins 45

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Speaker Amplifier Supply Voltage Range PVDD 4.5 14 V Inferred from PSRR test 2
Supply Voltage Range VDD 2.7 3.6 V Inferred from PSRR test 2
Quiescent Current VDD IDD 20 35 mA 2
Quiescent Current PVDD IPVDD 10 20 mA 2
Shutdown Current VDD IVDDSHDN 0.1 1 µA TA = +25°C 2
Shutdown Current PVDD IPVDDSHDN 0.1 1 µA TA = +25°C 2
Input Amplifier Output-Voltage Swing High VOH 20 mV Specified as VDD, VOH, RL = 2kΩ connected to 1.5V 2
Input Amplifier Output-Voltage Swing Low VOL 20 mV Specified as VOL, GND, RL = 2kΩ connected to 1.5V 2
Output Offset Voltage VOS 2 15 mV TA = 25°C 2
Hard Output Current Limit ISC 3.9 5.5 A 3
Power-Supply Rejection Ratio (VDD) PSRR 68 dB VDD = 2.7V to 3.6V, TA = 25°C, MUTE = high 4
Power-Supply Rejection Ratio (PVDD) PSRR 50 83 dB PVDD = 4.5V to 14V 4
SYNC Frequency (SYNC = GND) fSYNC 1020 1200 1355 kHz SYNC = GND 4
SYNC Frequency (SYNC unconnected) fSYNC 1280 1440 1640 kHz SYNC = unconnected 4
Class D Switching Frequency (SYNC = GND) fSW 255 300 338 kHz SYNC = GND 4
Class D Switching Frequency (SYNC unconnected) fSW 320 360 410 kHz SYNC = unconnected 4
SYNC Frequency Lock Range 1000 1600 kHz 4
Minimum SYNC Frequency Lock Duty Cycle 40 % 4
Maximum SYNC Frequency Lock Duty Cycle 60 % 4
VOL Input Leakage Current -5 5 µA 4
Digital Input-Voltage High VIH 0.7 x VDD SHDN, MUTE, ADDR1, ADDR2, SCLK, SDA/VOL 4
Digital Input-Voltage Low VIL 0.3 x VDD SHDN, MUTE, ADDR1, ADDR2, SCLK, SDA/VOL 4
Digital Input Leakage Current ILK -1 1 µA TA = +25°C 4
Digital Output-Voltage Low VIL 0.4 V IOL = 3mA 4
SYNC Input-Voltage High VSYNCIH 2.3 V 5
SYNC Input-Voltage Low VSYNCIL 0.8 V 5
SYNC Input Leakage ISYNCIN 7.5 13 µA TA = +25°C 5
SYNCOUT Output-Voltage Low VSYNCOUTIL 0.3 V ISINK = 1mA 5
Serial Clock fSCL 400 kHz 5
Bus Free Time Between STOP and START tBUF 1.3 µs 5
Hold Time (Repeated) START Condition tHD,STA 0.6 µs 5
Repeated START Condition Setup Time tSU,STA 0.6 µs 5
STOP Condition Setup Time tSU,STO 0.6 µs 5
Data Hold Time tHD,DAT 0 0.9 µs 5
Data Setup Time tSU,DAT 100 ns 5
SCL Clock Low Period tLOW 1.3 µs 5
SCL Clock High Period tHIGH 0.6 µs 5
Pulse Width of Spike Suppressed tSP 0 50 ns 5
Capacitive Load for Each Bus Line CB 400 pF 5
PVDD to PGND PVDD 16 V 2
VDD to GND VDD 4 V 2
BOOT_ to VDD / OUT_ -0.3 6 V 2
Any Other Pin to GND -0.3 4 V 2
Continuous Input Current (except OUT_) -20 20 mA 2
Junction Temperature 150 °C 2
Operating Temperature Range -40 85 °C 2
Storage Temperature Range -65 150 °C 2
Lead Temperature 300 °C soldering, 10s 2
Thermal Resistance, single-layer board θJA 37 °C/W Single-layer board 2
Thermal Resistance, multilayer board θJA 27 °C/W Multilayer board 2
Thermal-Shutdown Threshold 165 °C 5
Thermal-Shutdown Hysteresis 15 °C 5

CAD (KiCad official)

  • Symbol: MAX9744ETH+
  • Footprint: Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: TQFN-44(7x7) (KiCad packages3D, STEP)
  • 3D model files: max9744eth-etched.step / max9744eth-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max9744eth.step / max9744eth.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (28 pp, sha256 0af23e8c2d55295d, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF