← Commit history

Set visibility: public

Ray ·ac0fc534c2 · ·parent d8936ef
1 file changed +12−9
page.json+12−9
@@ -32,19 +32,19 @@         "number": "1",         "name": "OUTL",         "type": "output",-        "description": "Left-channel headphone amplifier output. Ground-referenced (SGND) DirectDrive output; drives headphone loads (16\u03a9/32\u03a9) directly with no DC-blocking capacitor required."+        "description": "Left-channel headphone amplifier output. Ground-referenced (SGND) DirectDrive output; drives headphone loads (16Ω/32Ω) directly with no DC-blocking capacitor required."       },       {         "number": "2",         "name": "VDD",         "type": "power_in",-        "description": "Positive power-supply input, 4.5V to 5.5V. Bypass with a 1\u00b5F ceramic capacitor to PGND placed close to the pin."+        "description": "Positive power-supply input, 4.5V to 5.5V. Bypass with a 1µF ceramic capacitor to PGND placed close to the pin."       },       {         "number": "3",         "name": "C1P",         "type": "passive",-        "description": "Charge-pump flying-capacitor positive terminal. Connect a 1\u00b5F ceramic capacitor between C1P and C1N. Part of the 270kHz charge pump that generates the negative rail PVSS."+        "description": "Charge-pump flying-capacitor positive terminal. Connect a 1µF ceramic capacitor between C1P and C1N. Part of the 270kHz charge pump that generates the negative rail PVSS."       },       {         "number": "4",@@ -56,7 +56,7 @@         "number": "5",         "name": "C1N",         "type": "passive",-        "description": "Charge-pump flying-capacitor negative terminal. Connect a 1\u00b5F ceramic capacitor from C1P to C1N."+        "description": "Charge-pump flying-capacitor negative terminal. Connect a 1µF ceramic capacitor from C1P to C1N."       },       {         "number": "6",@@ -68,19 +68,19 @@         "number": "7",         "name": "PVSS",         "type": "power_out",-        "description": "Charge-pump negative-supply output (approximately -VDD). Connect to SVSS externally and bypass to PGND with a 1\u00b5F ceramic hold capacitor (C2)."+        "description": "Charge-pump negative-supply output (approximately -VDD). Connect to SVSS externally and bypass to PGND with a 1µF ceramic hold capacitor (C2)."       },       {         "number": "8",         "name": "SHDN",         "type": "input",-        "description": "Active-low shutdown input (CMOS-level: VIH \u2265 2V, VIL \u2264 0.8V). Drive low to disable both amplifiers and the charge pump (ISHDN < 0.1\u00b5A typ); drive high to enable. In shutdown the output impedance is 14k\u03a9\u2016RF."+        "description": "Active-low shutdown input (CMOS-level: VIH ≥ 2V, VIL ≤ 0.8V). Drive low to disable both amplifiers and the charge pump (ISHDN < 0.1µA typ); drive high to enable. In shutdown the output impedance is 14kΩ‖RF."       },       {         "number": "9",         "name": "INL",         "type": "input",-        "description": "Left-channel inverting audio input. AC-couple through an external RIN input resistor (MAX9728A has adjustable gain Av = -RF/RIN); input impedance 15-25k\u03a9 (19k\u03a9 typ on MAX9728B)."+        "description": "Left-channel inverting audio input. AC-couple through an external RIN input resistor (MAX9728A has adjustable gain Av = -RF/RIN); input impedance 15-25kΩ (19kΩ typ on MAX9728B)."       },       {         "number": "10",@@ -110,7 +110,7 @@         "number": "14",         "name": "OUTR",         "type": "output",-        "description": "Right-channel headphone amplifier output. Ground-referenced DirectDrive output; up to 60mW into 32\u03a9, 42mW into 16\u03a9, THD+N = 0.02% at 50mW/32\u03a9."+        "description": "Right-channel headphone amplifier output. Ground-referenced DirectDrive output; up to 60mW into 32Ω, 42mW into 16Ω, THD+N = 0.02% at 50mW/32Ω."       }     ],     "provenance": {@@ -192,5 +192,8 @@     "docs/max9728aeud-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file