component
MAX968EUA+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated Comparators, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX968EUA+T
Analog Devices Inc Maxim Integrated · Comparators · MSOP-8
MAX968EUA+T from Analog Devices Inc Maxim Integrated, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Comparator A open-drain output, which can be pulled beyond VCC up to 6V (max) above ground and tolerates a continuous short circuit to GND or VCC. |
| 2 | GND | power_in | Ground reference for the device; REF is specified typically at 1.235V with respect to GND. |
| 3 | INA+ | input | Comparator A noninverting input, with a -0.25V to VCC input common-mode range. |
| 4 | INB- | input | Comparator B inverting input, with a -0.25V to VCC input common-mode range. |
| 5 | HYST | input | Hysteresis input that must be connected to REF if unused; its input voltage range is from VREF down to (VREF - 50mV). |
| 6 | REF | output | Internal 1.235V ±1.5% reference output (typically sources 50µA), which should be bypassed with 0.1nF to 0.1µF to reduce noise. |
| 7 | VCC | power_in | Positive supply voltage, +1.6V to +5.5V; the µMAX package is specified for 1.8V to 5.5V over -40°C to +85°C. |
| 8 | OUTB | output | Comparator B open-drain output, which can be pulled beyond VCC up to 6V (max) above ground and tolerates a continuous short circuit to GND or VCC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VCC) absolute maximum | VCC | 6 | V | 2 | |||
| Voltage on IN_-, IN_+, REF, HYST | -0.3 | V | 2 | ||||
| Voltage on OUT_ | OUT_ | -0.3 | 6 | V | 2 | ||
| Current into input pins | -20 | 20 | mA | 2 | |||
| Operating temperature range | -40 | 85 | °C | 2 | |||
| Storage temperature range | -65 | 150 | °C | 2 | |||
| Lead temperature (soldering) | 300 | °C | soldering, 10s | 2 | |||
| Supply voltage range | VCC | 1.6 | 5.5 | V | All packages, TA = 0°C to +85°C | 2 | |
| Supply voltage range (µMAX) | VCC | 1.8 | 5.5 | V | µMAX package, TA = -40°C to +85°C | 2 | |
| Supply current | ICC | 10 | 16 | µA | 2 | ||
| Power-supply rejection ratio | PSRR | 0.1 | 1 | mV/V | 1.7V ≤ VCC ≤ 5.5V | 2 | |
| Common-mode voltage range | VCMR | -0.25 | V | TA = +25°C | 2 | ||
| Input offset voltage (µMAX) | VOS | 4 | mV | Common-mode range = -0.25V to 1.3V, VCC > 1.8V; TA = 0°C to +85°C | 2 | ||
| Input offset voltage (µMAX) | VOS | 6 | mV | Common-mode range = -0.25V to 1.3V, VCC > 1.8V; TA = -40°C to +85°C | 2 | ||
| Input offset voltage, full common-mode range (µMAX) | VOS | 10 | mV | Full common-mode range; TA = 0°C to +85°C | 2 | ||
| Input offset voltage, full common-mode range (µMAX) | VOS | 15 | mV | Full common-mode range; TA = -40°C to +85°C | 2 | ||
| Input hysteresis | VHYST | -1 | 1 | mV | HYST = REF | 2 | |
| Input bias current | IB | -5 | 0.001 | 5 | nA | Common-mode range = -0.25V to (VCC - 0.25V) | 2 |
| Input bias current, full common-mode range | IB | -50 | 0.001 | 50 | nA | Full common-mode range, TA = +25°C | 2 |
| Common-mode rejection ratio | CMRR | 1.5 | 4 | mV/V | 3 | ||
| HYST input leakage | IHYST | -10 | 10 | nA | 3 | ||
| Output voltage low | VOL | 0.2 | V | IOUT = 100µA, 1.6V < VCC < 2.7V | 3 | ||
| Output voltage low | VOL | 0.4 | V | IOUT = 500µA, 2.7V < VCC < 5.5V | 3 | ||
| Output leakage current | ILEAK | 1 | 100 | nA | VCC = 5.5V, VOUT = 5.5V; VCC = 1.6V, VOUT = 1.6V | 3 | |
| Reference voltage (µMAX) | VREF | 1.205 | 1.235 | 1.265 | V | µMAX package, TA = 0°C to +85°C | 3 |
| Reference voltage (µMAX) | VREF | 1.185 | 1.235 | 1.285 | V | µMAX package, TA = -40°C to +85°C | 3 |
| Source current | IREF+ | 15 | 50 | µA | HYST = REF | 3 | |
| Sink current | IREF- | 200 | 400 | nA | 3 |
CAD (KiCad official)
- Symbol:
MAX968EUA+T - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
max968eua-t-etched.step/max968eua-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max968eua-t.step/max968eua-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (15 pp, sha256
fcb85995425743e4, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).