Generated by kicad-footprint-generator · KiCad file format 20260206
MAX9277GTM
Analog Devices Inc./Maxim Integrated · Serializers / Deserializers · TQFN-48(7x7)
MAX9277GTM from Analog Devices Inc./Maxim Integrated, in a TQFN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RXIN0- | input | LVDS data input 0 inverting; used in 3-channel mode (BWS = low) and in 4-channel or high-bandwidth mode. |
| 2 | RXIN0+ | input | LVDS data input 0 noninverting; used in 3-channel mode (BWS = low) and in 4-channel or high-bandwidth mode. |
| 3 | RXIN1- | input | LVDS data input 1 inverting; used in 3-channel mode (BWS = low) and in 4-channel or high-bandwidth mode. |
| 4 | RXIN1+ | input | LVDS data input 1 noninverting; used in 3-channel mode (BWS = low) and in 4-channel or high-bandwidth mode. |
| 5 | LVDSVDD | power_in | 3.3V LVDS power supply; bypass to AGND with 0.1µF and 0.001µF capacitors, smallest closest to the pin. |
| 6 | AGND | power_in | Analog and LVDS ground. |
| 7 | RXIN2- | input | LVDS data input 2 inverting; used in 3-channel mode (BWS = low) and in 4-channel or high-bandwidth mode. |
| 8 | RXIN2+ | input | LVDS data input 2 noninverting; used in 3-channel mode (BWS = low) and in 4-channel or high-bandwidth mode. |
| 9 | RXCLKIN- | input | LVDS clock input inverting; provides the PLL reference clock. |
| 10 | RXCLKIN+ | input | LVDS clock input noninverting; provides the PLL reference clock. |
| 11 | RXIN3- | input | LVDS data input 3 inverting; used only in 4-channel or high-bandwidth mode (BWS = high or open). |
| 12 | RXIN3+ | input | LVDS data input 3 noninverting; used only in 4-channel or high-bandwidth mode (BWS = high or open). |
| 13 | AGND | power_in | Analog and LVDS ground. |
| 14 | LVDSVDD | power_in | 3.3V LVDS power supply; bypass to AGND with 0.1µF and 0.001µF capacitors, smallest closest to the pin. |
| 15 | AVDD | power_in | 1.8V analog power supply; bypass to EP with 0.1µF and 0.001µF capacitors, smaller closest to the pin. |
| 16 | SD | input | I2S/TDM serial-data input with internal pulldown to GND; can serve as an additional control/data input when I2S/TDM encoding is disabled, and is encrypted when HDCP is enabled. |
| 17 | SCK | input | I2S/TDM serial-clock input with internal pulldown to GND. |
| 18 | WS | input | I2S/TDM word-select input with internal pulldown to GND. |
| 19 | CNTL1 | input | Control input with internal pulldown to GND, latched every RXCLKIN cycle; not available in 3-channel mode (BWS = low) and mapped to internal bit DIN27 (CNTL1/RES). |
| 20 | CNTL2 | input | Control input with internal pulldown to GND, latched every RXCLKIN cycle; not available in 3-channel mode (BWS = low) and mapped to internal bit DIN28. |
| 21 | AGND | power_in | Analog and LVDS ground. |
| 22 | DVDD | power_in | 1.8V digital power supply; bypass to GND with 0.1µF and 0.001µF capacitors, smaller closest to the pin. |
| 23 | GND | power_in | Digital and I/O ground. |
| 24 | IOVDD | power_in | 1.8V to 3.3V I/O supply that sets logic levels for all pins except LVDS inputs and OUT+/-; bypass to GND with 0.1µF and 0.001µF capacitors. |
| 25 | RX/SDA | bidirectional | UART receive / I2C serial data input/output with open-drain driver and internal 30kΩ pullup to IOVDD; function set by CONF[1:0] at power-up and requires a pullup resistor. |
| 26 | TX/SCL | bidirectional | UART transmit / I2C serial clock input/output with open-drain driver and internal 30kΩ pullup to IOVDD; function set by CONF[1:0] at power-up and requires a pullup resistor. |
| 27 | CONF1 | input | Three-level configuration input latched at power-up or on resuming from power-down; use 6kΩ (max) pullup to IOVDD or pulldown to GND. |
| 28 | LMN1 | input | Line-fault monitor input 1. |
| 29 | AGND | power_in | Analog and LVDS ground. |
| 30 | OUT- | output | Inverting CML coax/twisted-pair serial output. |
| 31 | OUT+ | output | Noninverting CML coax/twisted-pair serial output. |
| 32 | AVDD | power_in | 1.8V analog power supply; bypass to EP with 0.1µF and 0.001µF capacitors, smaller closest to the pin. |
| 33 | LMN0 | input | Line-fault monitor input 0. |
| 34 | LFLT | output | Active-low open-drain line-fault output with 60kΩ internal pullup to IOVDD; low indicates a line fault and it is high when PWDN = low. |
| 35 | GPO/HIM | bidirectional | HIM input with internal pulldown latched at power-up (pullup of 30kΩ or less to IOVDD sets high), then switches to GPO output that follows the deserializer GPI (or INT) state and is low after power-up or when PWDN is low. |
| 36 | CONF0 | input | Three-level configuration input latched at power-up or on resuming from power-down; use 6kΩ (max) pullup to IOVDD or pulldown to GND. |
| 37 | IOVDD | power_in | 1.8V to 3.3V I/O supply that sets logic levels for all pins except LVDS inputs and OUT+/-; bypass to GND with 0.1µF and 0.001µF capacitors. |
| 38 | GND | power_in | Digital and I/O ground. |
| 39 | DVDD | power_in | 1.8V digital power supply; bypass to GND with 0.1µF and 0.001µF capacitors, smaller closest to the pin. |
| 40 | ADD0 | input | Three-level address selection input latched at power-up or on resuming from power-down; use 6kΩ (max) pullup to IOVDD or pulldown to GND. |
| 41 | BWS | input | Three-level bus width select input: low (6kΩ max pulldown) for 3-channel mode, high (6kΩ max pullup to IOVDD) for 4-channel mode, open for high-bandwidth mode; set the same on both sides of the link. |
| 42 | PWDN | input | Active-low power-down input with internal pulldown to EP; set low to enter power-down mode. |
| 43 | CDS/CNTL3 | input | Control direction selection (default, low when µC is at the serializer, high when at the deserializer) or CNTL3 in high-bandwidth mode, with internal pulldown to GND. |
| 44 | MS/CNTL0 | input | Mode select (low for base mode, high for bypass mode, default) or CNTL0 in high-bandwidth mode, with internal pulldown to GND. |
| 45 | AUTOS | input | Active-low auto-start input with internal pulldown to GND; high disables serialization at power-up, low enables serialization and automatic PLL range selection. |
| 46 | ADD1 | input | Three-level address selection input latched at power-up or on resuming from power-down; use 6kΩ (max) pullup to IOVDD or pulldown to GND. |
| 47 | AVDD | power_in | 1.8V analog power supply; bypass to EP with 0.1µF and 0.001µF capacitors, smaller closest to the pin. |
| 48 | CX/TP | input | Coax/twisted-pair select input with internal pulldown to GND; low for twisted-pair (differential) drive, high for coax (single-ended) drive. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | TQFN-48(7x7) |
| Category | Communication Interface Chip |
| Pins | 49 |
CAD (KiCad official)
- Symbol:
MAX9277GTM - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: TQFN-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
max9277gtm-etched.step/max9277gtm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max9277gtm.step/max9277gtm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (73 pp, sha256
b8232d10a4b4ab62, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).